Wood Spacers

  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
  1. Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    Micro Jig GRR-Ripper® Basic 3D Push Block System GR-100

    The GRR-Ripper is a precision, guidance, and 3D Push Block System designed to feed wood on a table saw safer than you can with your hands alone and more accurate and more precise than with conventional push blocks. The results will be better projects with less waste and fingers intact. With its…

    25 Review(s)
    $59.99
  2. FastCap Miller FastBlock, 2-Pack

    FastCap Miller FastBlock, 2-Pack

    …from 5/8" to 1".* Durable and permanent.* Flippable adjustment block accepts both wood screws and euro screws.* Great for face frame cabinets, euro cabinets and pull-out shelves.* Adjustment block can be paired with a wood spacer to accommodate any spacing required.* Made of durable ABS.

    1 Review(s)
    $1.99
  3. Maple Gallery Spindle

    Maple Gallery Spindle

    Decorative hardwood spacers, smoothly sanded and ready for finishing. Use on plate rails, spice racks, headboards and more. 8 per pack. Specifications:* Tenon diameter is 1/4" * 1-1/8" long (not including tenons)* 5/8" wide at widest point

    $4.79
  4. Adjustable Mandrel

    Adjustable Mandrel

    Obtain the perfect mandrel length for any pen kit. Just loosen the locking collar and adjust the mandrel as needed-no more hassling with spacers. Turn two barrels at once, or single barrels up to 6" long. Consult your lathe's instruction manual to determine the appropriate MT size. For 7mm pen…

    4 Review(s)
    $32.49
  5. Pro Pen Turning Mandrel, #1 Morse Taper

    Pro Pen Turning Mandrel, #1 Morse Taper

    …held directly in the morse taper of your lathe! The brass compression fitting allows you to turn shorter length blank without having to use a wood spacer. Simply slide the fitting onto the shaft and tighten it at the correct location for your blank. This Pro Pen Turning Mandrel includes a #1…

    $13.99
  6. Pro Pen Turning Mandrel, #2 Morse Taper

    Pro Pen Turning Mandrel, #2 Morse Taper

    …held directly in the morse taper of your lathe! The brass compression fitting allows you to turn shorter length blank without having to use a wood spacer. Simply slide the fitting onto the shaft and tighten it at the correct location for your blank. This Pro Pen Turning Mandrel includes a #2…

    $14.99
  7. Freud® 99-191 V Panel Router Bit Set - 1-11/64" Dia x 1-1/8" H x 1/2" Shank

    Freud® 99-191 V Panel Router Bit Set - 1-11/64" Dia x 1-1/8" H x 1/2" Shank

    Create your own custom V-Groove paneling from the solid wood material of your choice! Set includes spacers that allow you to produce V-groove paneling from 1/2", 3/4", or 1" thick stock. Neat 45° chamfer produces a classic lined effect, similar to beadboard, while the tongue and groove joint…

    $177.47
  8. Freud® 99-268 Entry/Interior Door Ogee Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    Freud® 99-268 Entry/Interior Door Ogee Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    …rail bit from the lower cutter and shank. Create 1-3/4" joints for exterior doors, or remove the spacers and narrow to 1-3/8" for interior doors.Includes coping cutter, stick cutter, wrenches, wood storage case, and FREE instructional DVD. Additional features:* Cuts all composition materials,…

    $207.97
  9. Freud® 99-269 Entry Door Cove Bead Style Router Bit Set - 1/2" Shank

    Freud® 99-269 Entry Door Cove Bead Style Router Bit Set - 1/2" Shank

    …rail bit from the lower cutter and shank. Create 1-3/4" joints for exterior doors or remove the spacers and narrow to 1-3/8" for interior doors. Includes coping cutter, stick cutter, wrenches, wood storage case, and FREE instructional DVD. Technical Details:* Cuts all composition materials,…

    1 Review(s)
    $199.97
  10. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …Blocks (49120, sold separately below), the Multi-Rest can be used on even larger lathes.* The base of the MultiRest has independently adjustable spacer blocks that provide a secure fit on lathe beds with way sizes from 1" to 4.5" in width.* Multi-ring structure creates great rigidity while…

    $359.95
  11. Kreg Jig K4MS Master System

    Kreg Jig K4MS Master System

    …jig with addition of spacer blocks to the bottom of drill guide* 3-hole drill guide w/hardened steel core-adjustable for 1/2" to 1-1/2" stock thicknesses in 1/8" increments* Material support stop swings out of the way for multiple holes* Glass reinforced nylon body* Wood chip relief-one relief…

    23 Review(s)
    $139.00
  12. Cherry Gallery Spindle

    Cherry Gallery Spindle

    Decorative hardwood spacers, smoothly sanded and ready for finishing. Use on plate rails, spice racks, headboards and more. 8 per pack. Specifications:* Tenon diameter is 1/4" * 1-1/8" long (not including tenons)* 5/8" wide at widest point

    $5.49
  13. Oak Gallery Spindle

    Oak Gallery Spindle

    Decorative hardwood spacers, smoothly sanded and ready for finishing. Use on plate rails, spice racks, headboards and more. 8 per pack. Specifications:* Tenon diameter is 1/4" * 1-1/8" long (not including tenons)* 5/8" wide at widest point

    $3.99
  14. Adjustable Pen Turning Mandrel, #1 Morse Taper

    Adjustable Pen Turning Mandrel, #1 Morse Taper

    Obtain the perfect mandrel length for any pen kit. Just loosen the locking collar and adjust the mandrel as needed - no more hassling with spacers. Turn two barrels at once, or single barrels up to 6'' long. Consult your lathe's instruction manual to determine the appropriate MT (morse taper)…

    $20.99
  15. Adjustable Pen Mandrel #2 Taper

    Adjustable Pen Mandrel #2 Taper

    Obtain the perfect mandrel length for any pen kit. Just loosen the locking collar and adjust the mandrel as needed - no more hassling with spacers. Turn two barrels at once, or single barrels up to 6'' long. Consult your lathe's instruction manual to determine the appropriate MT (morse taper)…

    $21.99
  16. Acrylic Pen Buffing System

    Acrylic Pen Buffing System

    …with plastic rouge, and a final buffing on the flannel wheel yields an unbelievable shine that shows no scratches, even under a loupe. System includes: #2 Morse taper, thick 8mm shaft, Teflon spacers, special blue plastic rouge, cotton-muslin application wheel and cotton-flannel polishing wheel.

    1 Review(s)
    $48.29
  17. Freud® 99-267 2-pc. Entry & Interior Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    Freud® 99-267 2-pc. Entry & Interior Router Bit Set - 1-7/8" Dia x 1-7/8" H x 1/2" Shank

    …and stile bits, and are capable of cutting joints for doors up to 1-3/4" thick. To make thinner interior doors (1-3/8" thick), simply remove the spacers. You can also mill a tenon of virtually any length! To do so, the top cutter and bearing of the rail bit is simply unscrewed from the lower cutter…

    1 Review(s)
    $199.97
  • Grid List
  • Page:
    1. 1
  • Items 1 - 17 of 17
  • Page:
    1. 1
Feedback X