Wood Threading

  • Items 1 - 24 of 170
  • Page:
    1. 1
    2. 2
    3. 3
  1. Beech Wood Workbenches

    Beech Wood Workbenches

    …laminated beech wood, these robust benches offer a solid, heavy duty work surface, two full-featured wood/iron vises and craftsman-quality construction. 33-1/2" tall. 19-5/8"wide. Some assembly required. A Better Vise...* Real undermounted vise assembly — not just a threaded insert.* Twin…

    27 Review(s)
    From: $524.99
  2. Bed Rail Connection System

    Bed Rail Connection System

    …kit includes 5/16" threaded inserts, threaded rod, nuts and slotted washers for 4 bed rail joints, plus 8 wood dowels. To install, drill a 35mm (1-3/8") flat-bottom hole and perpendicular 5/8" through-hole in the bed rail, and a 17/32" hole in the bed post to house the threaded insert. TIP: To speed…

    8 Review(s)
    $13.69
  3. Mortise Centering Router Base

    Mortise Centering Router Base

    …Plate is constructed of 1/4" Acrylic with 1-1/2" opening, and is transparent for visibility.* Solid brass guides thread easily into 3 different insert settings for a variety of wood thicknesses and for non-centered mortises.* Predrilled hole pattern fits: Porter Cable 690/890 series, Makita…

    10 Review(s)
    $19.99
  4. Lathe Faceplates, 1''-8 TPI

    Lathe Faceplates, 1''-8 TPI

    …(44919) sizes. The 3'' diameter faceplate includes a set screw for use on reversible lathes, but the 2'' does not have a set screw. The hubs on both are as short as possible to minimize vibration, and the thread sizes are clearly laser cut into the hubs for easy identification. 1''-8 TPI thread.

    From: $22.99
  5. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …mini and midi lathes. Technical Details:* 5/8" diameter mounting post fits most mini and midi lathes.* 5/16" round stainless steel tool rest.* Cast steel body with black epoxy finish.* Integrated mounting post (not threaded) so it won't loosen with vibration or impact.* 3 sizes: 4", 6" and 10" long.

    4 Review(s)
    From: $19.99
  6. Riveting T-Nut Inserting Tool

    Riveting T-Nut Inserting Tool

    …sometimes resulting in the prongs stripping out the wood. The Riveting T-Nut system prevents this problem by permanently securing the T-nut to the panel with the Riveter Insertion Tool. Simply set the T-nut first with a hammer, then thread the insertion tool into it with a power drill. The tool…

    8 Review(s)
    $11.49
  7. Steel Threaded Inserts - Select size

    Steel Threaded Inserts - Select size

    …individual sizes. Size listed below is the size of the bolt (sold separately) that threads into the insert. Sold in packs of 8. Technical Details:* Can be installed with screwdriver, threaded insert wrench or threaded insert power drive tool.* Rugged steel construction.* Can be used for wood/wood…

    10 Review(s)
    From: $4.49
  8. Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    Nova Precision Midi 1" 8-TPI Direct Thread Chuck

    The Nova Precision Midi Direct Thread Chuck is the smallest chuck in the Nova lineup—ideal for lathes with up to a 12" swing over the bed. Its small size minimizes the load on small spindles and bearings, yet is extremely accurate, and built to the same exacting standards as the SuperNova 2…

    $119.99
  9. Screw-On Tee Nuts-Choose size thread

    Screw-On Tee Nuts-Choose size thread

    Screw-on tee nuts are ideal for mating machine threaded components with wood parts. The screw-on flange provides a positive lock against rotation and ensures that tee nuts won't drop out with use, making them the preferred method for installing threaded furniture levelers and glides. Technical…

    12 Review(s)
    $9.79
  10. Threaded Brass Inserts - Select size

    Threaded Brass Inserts - Select size

    …machine threads. Sold in packs of 8. Can be installed with screwdriver, threaded insert wrench or threaded insert power drive.Solid brass threaded insert is easy to install. Drill a hole the same size as body insert. Diameter permits the use of machine screws and bolts instead of wood screws. Drive…

    8 Review(s)
    From: $7.19
  11. Purified Beeswax

    Purified Beeswax

    …for making your own beeswax furniture polish, plus hundreds of other uses. Available in 200 gram bar. * Ideal for lubricating drawer runners, a traditional wood filler, wax cotton threads, water-proof stitching on shoes and boots, making candles, and more.* Can be dissolved with pure turpentine.

    $27.99
  12. Amerock Highland Ridge Latch, BP55315-PN

    Amerock Highland Ridge Latch, BP55315-PN

    * Finish: Polished Nickel* Base Material: Zinc* Length: 1 3/5 inch* Width: 1 3/4 inch* Projection: 1 1/5 inch* Knob Diameter: 1 inch* Machine Screw Thread Size: 6 #6 x 1/2" Oval Countersink Wood Screws * Screws are included* Warranty: Lifetime

    $17.79
  13. Yo-Yo Hardware Kit

    Yo-Yo Hardware Kit

    …to do it. The required mandrel is sold separately (46460) to make turning easy and foolproof. Simply press the hubs into your turning blanks and thread them onto the mandrel. * For best results, select a dry, dense hardwood for your turning blanks. Blanks should have no sap or defects that might…

    $4.49
  14. Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …variety of shop-made auxiliary fences to your existing fences without having the clamp interfere with your work. Eliminates the need for clunky wood screws and C-clamps or screwing into your expensive fence. * Use the fence clamps singly as stop blocks, or in pairs for sacrificial fences,…

    14 Review(s)
    $29.99
  15. Saberdrive™ Interior Wood Screws-#9 Wood Screws

    Saberdrive™ Interior Wood Screws-#9 Wood Screws

    These rugged interior wood screws are made from hardened steel for superior resistance to breakage. The star drive heads won't strip out, and the threads are serrated so they won't work loose over time. Type 17 point helps you drive the screw without a pilot hole in self-tapping applications.…

    $1.89
  16. Berenson Prelude Hook 8017-LWI-P

    Berenson Prelude Hook 8017-LWI-P

    * Finish: Weathered Iron* Base Material: ZINC* Length: 4 Inches* Width: 3/8 Inch* Projection: 3-1/16 Inches* Base Diameter: 1-1/16 Inches* Machine Screw Thread Size: #6 wood* Screw Length: 3/4 Inch* Pilot Hole Size: 1/16 Inch* Screws are included* Warranty: Lifetime

    $8.89
  17. Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread

    Nova Insert/Adapter, 1" 8-TPI RH/LH Dual Thread

    …with a variety of thread patterns on the interior, but all have the same exterior thread to fit all your Nova chuck(s). Just check the manual of your lathe to find the threading of your headstock spindle and purchase the corresponding adapter. Once the insert is in place, threading the chuck onto…

    $22.99
  18. Steel Hanger Bolts-Steel Hanger Bolts

    Steel Hanger Bolts-Steel Hanger Bolts

    …end of hanger bolt screws into a pilot hole in wooden member, while the other serves as a machine threaded stud that accepts a nut, T-nut or threaded insert. Deep screw threads bite into the wood to eliminate stripping and pull-out problems. See below for individual sizes. 8 per pack. Technical…

    6 Review(s)
    From: $2.49
  19. Titebond® Liquid Hide Wood Glue

    Titebond® Liquid Hide Wood Glue

    …or stirring. Professional woodworkers use Titebond Liquid Hide for its long assembly time, exceptional strength and unique crackling effect on wood. Titebond Liquid Hide provides superior creep-resistance, offers excellent sandability and is unaffected by finishes. Its sensitivity to moisture…

    6 Review(s)
    From: $11.19
  20. Face Plates

    Face Plates

    …by changing the threaded insert. They fit Delta, Jet and other lathes. Great for small to medium sized projects. Requires one of the inserts below to fit your lathe. Threaded inserts sold separately. Mount the plates to a wide variety of lathe spindles just by changing the threaded insert. They fit…

    2 Review(s)
    $25.99
  21. French Country Bun Feet

    French Country Bun Feet

    …foot. Available in paint-grade and hardwood species, this classic furniture foot is designed in a rustic style that conveys warmth and hospitality. Technical Details * 4" high x 3-3/8" diameter * Includes 5/16" x 18 TPI threaded lag bolt embedded in top * Arrives ready to finish * Sold individually

    2 Review(s)
    $19.99
  22. Mission Style Knobs

    Mission Style Knobs

    …1900's on mission style furniture. Comes unfinished and ready to stain. Made of red oak. Pyramids were favorite accent shapes on Mission furniture. Just stain these authentically styled knobs to match your reproductions. Measures 1-3/4" x 1-3/4" square. Supplied with wood thread mounting screw.

    2 Review(s)
    From: $5.79
  23. Saberdrive™ Interior Wood Screws-#6 Wood Screws

    Saberdrive™ Interior Wood Screws-#6 Wood Screws

    These rugged interior wood screws are made from hardened steel for superior resistance to breakage. The star drive heads won't strip out, and the threads are serrated so they won't work loose over time. Type 17 point helps you drive the screw without a pilot hole in self-tapping applications.…

    From: $1.89
  24. African Blackwood Turning Blanks

    African Blackwood Turning Blanks

    Coined "the turning wood of kings" for it's ability to hold fine, ornamental detail, African Blackwood will take an exceptional polish and threads extraordinarily well. The heartwood is dark brown with bold, black streaks and hints of purple, while the sapwood is creamy white. Despite being very…

    2 Review(s)
    $13.99
  • Items 1 - 24 of 170
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X