Woodworking Dust Collection Systems

  • Items 1 - 24 of 49
  • Page:
    1. 1
    2. 2
    3. 3
  1. Jet® 1700CFM Air Filtration System w/Remote Control

    Jet® 1700CFM Air Filtration System w/Remote Control

    …is perfect for the serious woodworker. Simply hang it from the ceiling and turn it on, and it will clear the room of those unwanted fine dust particles. It clears the room at 1,300 CFM and comes standard with a remote-control with built-in timer.* Three-filter system with air diffuser disperses…

    $659.99
  2. Powermatic PM1900TX-BK1 Dust Collector, 3HP 1PH 230V, 30-Micron Bag Filter Kit

    Powermatic PM1900TX-BK1 Dust Collector, 3HP 1PH 230V, 30-Micron Bag Filter Kit

    …filter bags, collects 98% of 2-micron particles. A digital timer can be set for up to 99 minutes, and an infrared sensor allows remote control operation. The all-metal duct improves rigidity and air flow. Multiple connection port capability makes this machine a central dust collection system for the…

    $1,099.99
  3. Laguna 3 hp Mobile Cyclone Dust Collector

    Laguna 3 hp Mobile Cyclone Dust Collector

    …for both with its 3HP Mobile Cyclone System. It delivers the power and quality to separate dust and fine particles from the air you breathe, making your shop a safe shop!* Dust and debris is collected in a 60 gallon metal collection drum* Quick-release collection drum with separate wheels for quick…

    $1,695.00
  4. Nordfab End Caps

    Nordfab End Caps

    Easily close off open taps in your dust collection network for optimal suction power. Listed dimension states the cap's diameter. Note: One Quick-Fit clamp of appropriate diameter is required for every connection within your system. Click here to view the clamp offer (sold separately). These are…

    From: $14.49
  5. Nordfab Elbows-90° Elbows

    Nordfab Elbows-90° Elbows

    …fully-welded seams prevent leaks and snags, while its simple design allows for fast and easy modification as your needs change. For woodworkers, Quick-Fit presents a high-performance, time-saving alternative to traditional dust collection hose networks. Elbows have a centerline radius of 1.0.

    From: $39.69
  6. Nordfab Radial Armsaw Hood

    Nordfab Radial Armsaw Hood

    A simple and effective solution for collecting dust from radial arm saws. For each hood listed below, the given dimension states the diameter of the duct fitting. Note: One Quick-Fit clamp of appropriate diameter is required for every connection within your system. Click here to view the clamp offer…

    From: $181.79
  7. Nordfab Quick-Fit Clamps-Clamps

    Nordfab Quick-Fit Clamps-Clamps

    …than 40% over traditional ductwork. Smooth, fully-welded seams prevent leaks and snags, while its simple design allows for fast and easy modification as your needs change. For woodworkers, Quick-Fit presents a high-performance, time-saving alternative to traditional dust collection hose networks.

    From: $8.79
  8. Nordfab Machine Adapter

    Nordfab Machine Adapter

    system to dust ports on table saws, jointers, and other shop equipment in order to collect dust as it's created. The adapter's raw end simply slides over the tool's port for fast and easy setup. Note: One Quick-Fit clamp of appropriate diameter is required for every connection within your system.

    From: $20.59
  9. Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 52" Accu-Fence System

    Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 52" Accu-Fence System

    …sold separately) and 52''. Features:* A rugged cabinet saw that only requires 115V power.* Blade surround and collection hose provide an unobstructed path, maximizing dust collection.* Conveniently located hands-free power switch.* Tool-less guard assembly with independent side leaves is easy to…

    $2,099.99
  10. Powermatic PM1900TX-BK3 Dust Collector, 3HP 3PH 230/460V, 30-Micron Bag Filter Kit

    Powermatic PM1900TX-BK3 Dust Collector, 3HP 3PH 230/460V, 30-Micron Bag Filter Kit

    …of fine dust particles* The large impeller is powered by a 3HP motor for peak performance* Triple 4" dust ports allow for several hoses to be attached at the same time* Cloth collection bags with view window use a snap ring for rapid installation/removal* 10 cubic feet collection bag capacity…

    $1,099.99
  11. Nordfab Manual Blast Gate

    Nordfab Manual Blast Gate

    …than 40% over traditional ductwork. Smooth, fully-welded seams prevent leaks and snags, while its simple design allows for fast and easy modification as your needs change. For woodworkers, Quick-Fit presents a high-performance, time-saving alternative to traditional dust collection hose networks.

    2 Review(s)
    From: $44.29
  12. Kreg Jig® K5 Pocket Hole System

    Kreg Jig® K5 Pocket Hole System

    …Storage wings provide built-in storage for bits, screws, accessories.* Stop-collar setting block makes drill bit setup easy.* Swiveling dust collection port accepts standard 1-1/4" vacuum hose.* Adjustable workpiece stop mounts on either side for easy, repeatable drilling.* Comes fully assembled…

    1 Review(s)
    $139.00
  13. Nordfab Y-Branch

    Nordfab Y-Branch

    Made from 22-gauge galvanized steel, this transitioning element for your Nordfab Quick-Fit dust collection system is available in four sizes. The listed dimension for each branch below states the diameter of all three openings. If transitioning to smaller pipe, you'll need a Nordfab Reducer. Note:…

    From: $137.49
  14. Rockler Dust Collector for Rockler Dovetail Jigs

    Rockler Dust Collector for Rockler Dovetail Jigs

    …hundreds of dollars to get dust collection with a dovetail jig. Our revolutionary new dust collector eliminates virtually all the dust created when cutting dovetails. It easily attaches to Rockler's dovetail jigs (both new and old!) and a shop vacuum or dust collection system to provide you with a…

    23 Review(s)
    $47.99 $35.99

    SAVE 25%

  15. Powermatic PM1900TX-CK3 Dust Collector, 3HP 3PH 230/460V, 2-Micron Canister Kit

    Powermatic PM1900TX-CK3 Dust Collector, 3HP 3PH 230/460V, 2-Micron Canister Kit

    …impeller is powered by a 3HP motor for peak performance.* Triple 4" dust ports allow for several hoses to be attached at the same time.* Collection bags use a snap ring for rapid installation/removal.* 10 cubic feet collection bag capacity reduces number of bag changes.* Four swivel casters for…

    $1,299.99
  16. Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    Rockler's Complete Dovetail Jig with Dovetail Jig Dust Collector Combo

    …Jig Dust Collector: You don't have to spend hundreds of dollars to get dust collection with a dovetail jig. Our revolutionary new dust collector eliminates virtually all the dust created when cutting dovetails. It easily attaches to Rockler's Dovetail Jig and a shop vacuum or dust collection system

    131 Review(s)
    $205.98
  17. Kreg Jig K4MS Master System

    Kreg Jig K4MS Master System

    …or slipping it in your pocket for work on the job site. The material support stop guarantees perfect repeatability time after time, and the dust collection shroud aids in chip expulsion for faster, cleaner drilling. Adjustable for 1/2" to 1-1/2" thick stock in 1/8" incremental settings. * 3 tools…

    23 Review(s)
    $139.00
  18. Kreg Jig K4 Pocket Hole System

    Kreg Jig K4 Pocket Hole System

    …repairs* 3/8" step bit to drill pocket hole and 3/16" pilot hole in one step* 6" long #2 driver bit* Rugged carrying case, SkillBuilder™ DVD, and detailed instructions* Note: In order to attach dust collection to the K4 Jig, a 2-1/2" to 1-1/4" Adapter is required (sold separately).

    38 Review(s)
    $99.00
  19. Woodworker's Journal Router Projects CD

    Woodworker's Journal Router Projects CD

    …Guide to Choosing a Router * Build the Ultimate Fluting Jig * Dust Collecting Router Table Fence * Router Bits: Cost, Quality and Value * Eclectic Blanket Chest * Six Tips for Avoiding Router Tearout * Box Joints on the Router Table * Modular Shelf System * Router Bit Cabinet with Pull-out Shelves

    $4.99
  20. Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 30" Accu-Fence System

    Powermatic PM1000 1-3/4 HP Table saw, 1-Phase With 30" Accu-Fence System

    …52'' (45878, sold separately). Features:* A rugged cabinet saw that only requires 115V power.* Blade surround and collection hose provide an unobstructed path, maximizing dust collection.* Conveniently located hands-free power switch.* Tool-less guard assembly with independent side leaves is easy to…

    $1,999.99
  21. The Best of Woodworker's Journal 3 Book Set

    The Best of Woodworker's Journal 3 Book Set

    …Routing System * Outfeed / Assembly Table * Pattern Routing Made Easy * Precision Crosscutting Jig * Router Basics Revisited * Router Guide * Router Mortising Made Easy * Router Straightedge Jig * Router Surface Jig * Shop-Built Panel Saw * Simple Crosscut Sled * Sliding Dovetail Systems * Table Saw…

    $55.85
  22. SawStop 3HP Professional Table Saw w/52'' Fence, Rails, and Extension Table

    SawStop 3HP Professional Table Saw w/52'' Fence, Rails, and Extension Table

    …legendary safety system, ground breaking 99% dust collection and peerless fit and finish, it's ready to help you get the job done.* Safety System: Automatically stops and retracts the blade on contact with skin.* Dust Collection Blade Guard: Low profile guard collects above table dust and minimizes…

    1 Review(s)
    $2,999.00
  23. SawStop 3HP Professional Table Saw w/36'' Fence, Rails, and Extension Table

    SawStop 3HP Professional Table Saw w/36'' Fence, Rails, and Extension Table

    …legendary safety system, ground breaking 99% dust collection and peerless fit and finish, it's ready to help you get the job done.* Safety System: Automatically stops and retracts the blade on contact with skin.* Dust Collection Blade Guard: Low profile guard collects above table dust and minimizes…

    1 Review(s)
    $2,899.00
  24. SawStop 3HP Professional Table Saw w/30'' Fence, Rails, and Extension Table

    SawStop 3HP Professional Table Saw w/30'' Fence, Rails, and Extension Table

    …legendary safety system, ground breaking 99% dust collection and peerless fit and finish, it's ready to help you get the job done.* Safety System: Automatically stops and retracts the blade on contact with skin.* Dust Collection Blade Guard: Low profile guard collects above table dust and minimizes…

    $2,729.00
  • Items 1 - 24 of 49
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X