Woodworking Tools

  • Items 1 - 24 of 319
  • Page:
    1. 1
    2. 2
    3. 3
  1. Jet® 3HP Shaper, 1/2'' & 3/4'' Spindles

    Jet® 3HP Shaper, 1/2'' & 3/4'' Spindles

    The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25"x 25-1/2" precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built…

    $2039.99
  2. Base Molding Coper

    Base Molding Coper

    Getting corner baseboard to fit together perfectly can be a tricky task without a tool like BaseCoper, which features an optimal-angle design for fast, precise-fitting cope cuts using your jigsaw. This easy-to-use jig creates a flat suface on which your jigsaw's base can ride, keeping the blade at…

    4 Review(s)
    $18.99
  3. Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Betterley UNA-GAUGE Universal Alignment and Adjustment Gauge

    Get the tool alignment and adjustment gauge Fine Woodworking magazine calls "the best we've seen." From spindle and arbor runout to blade alignment, dado depth, router bit height and more, the Betterley UNA-GAUGE packs an amazing range of measurement capabilities into a single tool. Features:*…

    3 Review(s)
    $199.99
  4. 8'' Wixey™ Digital Protractor

    8'' Wixey™ Digital Protractor

    …a digital angle finder for finding and transferring angles, for layout work, and as a setup tool for setting miter and bevel angles, the 8" Wixey™ Digital Protractor will bring your woodworking to the twenty-first century. Technical Details: * Digital protractor has a large display to…

    34 Review(s)
    $63.99
  5. Cove Cutting Table Saw Jig

    Cove Cutting Table Saw Jig

    Cut custom coves on your table saw without juggling all those fences and clamps! This jig includes everything you need for safe, easy coving in one easy-to-use package. Accepts stock up to 7" wide and 1-1/2" thick, enabling you to cut huge crown moldings that would cost a fortune from the…

    16 Review(s)
    $89.99
  6. 3 Piece French Curve Set

    3 Piece French Curve Set

    A workshop standard, this 3 piece French curve set is ideal for transferring and creating arcs and shapes in a variety of woodworking projects. The French curves are machined from acrylic plastic to exacting standards and hand finished to ensure the best possible results. What's in the Box One 3…

    4 Review(s)
    $9.99
  7. Dado Jig for Low Profile Straight Edge Clamp System

    Dado Jig for Low Profile Straight Edge Clamp System

    With only a 1/2" straight bit and this handy, smooth-sliding Dado Jig, you can cut perfect tight-fitting dadoes to accept any stock from about 1/2" to 1" thick. Since it's infinitely adjustable within that range, it's perfect for plywood that is thinner than the nominal thickness, and for lumber…

    1 Review(s)
    $44.99
  8. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …distributor of this item in the United States.* One year warranty on parts and labor, special shipping exclusions apply FREE CNC Project Plans from Woodworker's Journal:* Butler's Tray* Weather Station* Cribbage Board Introducing CNCSharkTalk.com, a website presented by Rockler where CNC Shark users…

    20 Review(s)
    $2899.99
  9. Kreg Jig K4MS Master System

    Kreg Jig K4MS Master System

    …collection shroud aids in chip expulsion for faster, cleaner drilling. Adjustable for 1/2" to 1-1/2" thick stock in 1/8" incremental settings. * 3 tools in 1 - benchtop jig, portable contractor jig, repair jig with addition of spacer blocks to the bottom of drill guide* 3-hole drill guide w/hardened…

    23 Review(s)
    $139.00
  10. Grex P635 1-3/8'' Headless Pin Nailer

    Grex P635 1-3/8'' Headless Pin Nailer

    Voted "Best New Tool" in Popular Woodworking and "Best Bet" in Woodworker's Journal, this innovative pin nailer makes the perfect helpmate for finish and trim work. The patented magazine eliminates the need to adjust for different fastener lengths - just drop in your pins and you're ready to nail.…

    5 Review(s)
    $198.00
  11. Jet® 15'' Planer w/Quick-Change Knives

    Jet® 15'' Planer w/Quick-Change Knives

    Every serious woodworker needs a planer in the shop, but nobody likes to deal with the hassle of changing the knives. Enter the JET JWP-15DX Planer with quick change knives that align themselves, no adjustment required. Plus, each knife has two cutting edges to save you a little cash and a lot of…

    $1989.99
  12. Freud 13 Piece Super Bit Set

    Freud 13 Piece Super Bit Set

    This set is a veritable variety pack of the most-used bits for woodworkers, including three sizes of straight bits, a round-over bit, a chamfer bit, a rabbeting bit, a cove bit and a Roman ogee bit. All bits have sturdy 1/2" shanks for minimal vibration, and the set comes in Freud's unique shadow…

    2 Review(s)
    $220.47
  13. Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)

    Pattern Flush Trim Router Bit 1/2" Diameter x 1" Height (1/4 Shank)

    Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    $21.99 $15.39

    SAVE 30%

  14. Pattern Flush Trim Router Bit- 1/2 Inch Shank

    Pattern Flush Trim Router Bit- 1/2 Inch Shank

    Get fast, smooth cutting with this flush cutting bit. Top quality router bits that meet the high standards of Rockler Woodworking and Hardware. Two flutes, for fast, smooth, accurate trim cuts. Precision ground to close tolerances, easily used for pattern or template cutting.

    21 Review(s)
    From: $26.99
  15. Jet® 14'' 1.25HP Deluxe Band Saw

    Jet® 14'' 1.25HP Deluxe Band Saw

    …JWBS-14DXPRO 14" Deluxe Band Saw from JET (shown here with optional fence) has been fully redesigned to meet the needs of today's most demanding woodworkers. Gone are the days of adding a riser block; this 14" band saw comes with a massive cast iron frame for increased power that makes it ready to…

    4 Review(s)
    $999.99
  16. Thin Rip Tablesaw Jig

    Thin Rip Tablesaw Jig

    …scale to fine-tune for extremely thin strips. * Note: Ripping thin strips requires the use of a zero-clearance insert, sold separately.* The perfect tool for edging, inlay, bent laminations and more.* Solid phenolic for durability.* Low-profile miter track clamp locks in at any point along the miter…

    104 Review(s)
    $26.99
  17. Crown Molding Support

    Crown Molding Support

    "Many hands make light work" is a suitable motto for the new Crown Support from Bench Dog Tools. What used to require an assistant and a second ladder is now portable, permanent and unfailingly reliable. Unlike similar products on the market, the Bench Dog Crown Support straddles the molding,…

    5 Review(s)
    $31.99
  18. Magswitch Pro Fence Featherboard

    Magswitch Pro Fence Featherboard

    The Magswitch Pro Fence Featherboard is perfect for holding wood down on any steel woodworking table tool fence. Features two on/off Magswitches with 150lb/67kg holding force each. Use for right side feed on Table Saw or Band Saw blade. Low profile. Precise easy tensioning. Technical Details:* Ideal…

    1 Review(s)
    $68.99
  19. Table Saw Fence Systems

    Table Saw Fence Systems

    …precisely on your table saw is essential for fast and accurate Woodworking. COMPARE PERFORMANCE & PRICE WITH ANY FENCE! Being able to cut materials safely and precisely on your table saw is essential for fast and accurate Woodworking. Unless saw fences are well designed they make cutting a chore…

    28 Review(s)
    From: $329.99
  20. Click-N-Carve CNC Carving Machine BE2015

    Click-N-Carve CNC Carving Machine BE2015

    For those looking for plug-and-play simplicity in a CNC router, look no further than the Click-N-Carve BE2015. Affordable, accessible and intuitive, the Click-N-Carve is the very definition of easy-to-use: simply load your photo, close the lid, and with only a few clicks, the BE2015 will be quietly…

    3 Review(s)
    $1599.99
  21. Woodworker's Guide to Carving, Book

    Woodworker's Guide to Carving, Book

    …start in wood carving. Includes photos, illustrations, and tips on what tools are best to use and how to maintain them. Plus, you'll enjoy detailed plans on a variety of wood carving projects. Contents:* Carving tools* Getting started* Incised carving* Relief carving* Carving in the round* Detailed…

    $19.95
  22. Turning Bowls Book

    Turning Bowls Book

    …Turning expert Richard Raffan's easy-to-follow instructions show you how to: * choose the right chucks and tools for the job* sharpen and maintain your tools for the best results* handle tools safely and efficiently* learn basic techniques with ease Richard Raffan is internationally acclaimed for…

    $24.95
  23. Nobex Champion Miter Saw

    Nobex Champion Miter Saw

    This Swedish-made, high-precision miter boxe is made for the discerning old-school woodworker who appreciates the accuracy and craftsmanship of doing things by hand. The Nobex® Champion is their largest model and is the best all around miter box for the cabinetmaker's and joiner's shop. Machined…

    5 Review(s)
    $199.99
  24. Irwin Marples 10'' Saw Blade, 50T ATB+R

    Irwin Marples 10'' Saw Blade, 50T ATB+R

    …15°.* Arbor Size: 5/8".* Tool to be Used On: Table Saw, Miter Saw. About IRWIN Blades: IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry…

    7 Review(s)
    $44.99
  • Items 1 - 24 of 319
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X