Workbench Clamps

  • Items 1 - 24 of 82
  • Page:
    1. 1
    2. 2
    3. 3
  1. Kreg Standard Bench Klamp System

    Kreg Standard Bench Klamp System

    …just remove the clamp and enjoy a perfectly flat, unobstructed work surface! More than just a pocket-hole tool, the Bench Klamp System doubles as a convenient hold-down for routing, sanding and more. Additional insert plates are available to provide multiple clamping locations. Clamp rotates a full…

    7 Review(s)
    $39.99
  2. Heavy Duty Quick Release Front  Vise

    Heavy Duty Quick Release Front Vise

    Slides open or closed in seconds! This powerful vise is perfect for custom workbenches. A quick-release mechanism engages with a 1/4 turn of the handle, letting you make major adjustments almost instantaneously. Two 3/4" dia. solid steel guide rods provide absolute resistance to racking, while an…

    25 Review(s)
    $103.99
  3. Dust Right® Cord and Hose Holder

    Dust Right® Cord and Hose Holder

    …the perfect working height. Clamps easily onto any work surface up to 3-1/4" thick. Technical Details:* Cord and hose manager is ideal for sanders and routers, and also works with pneumatic hoses for nailers and pneumatic sanders.* Clamps without tools onto workbenches and work tables up to 3-1/4"…

    1 Review(s)
    $29.99
  4. Festool MFT/3 Multifunction Table - Basic

    Festool MFT/3 Multifunction Table - Basic

    …worksite. Use the MFT/3 - Basic as an out-feed table or as a work surface for sanding, jointing, clamping, or assembly. The large 43" x 28"perforated top is ideally suited for use with MFT clamping accessories, and the V-groove side rails are the same as the full version of the MFT/3, allowing you…

    $545.00
  5. Shop Vac Dust Fitting Adapter for 1-1/4'' to 2-1/4'' Diameter Hose

    Shop Vac Dust Fitting Adapter for 1-1/4'' to 2-1/4'' Diameter Hose

    …that will connect Shop Vac hoses to the 2-1/4" ports on Bench Dog Pro Fence router table fences, Rockler Router Table Dust Ports, Rockler Dovetail Jig Dust Collectors and more. Additional features:* Durable hard-plastic construction.* Tight friction fit.* Tool free set up - no clamps necessary!

    8 Review(s)
    $4.99
  6. Festool MFT/3 Multi Functional Table

    Festool MFT/3 Multi Functional Table

    …(61 lbs), and a new V-Groove profile for adapting future accessories. The trademark perforated work surface accommodates a wide variety of clamping configurations, while a highly accurate 180° Angle Fence and integrated Guide Rail System combine to create an absolutely precise cross-cutting…

    $645.00
  7. Sjobergs Smart Vise

    Sjobergs Smart Vise

    …the vise is closed.* 1" thick MDF top with melamine coating for stability and easy glue removal.* Vise jaws open to 4-1/2".* Standard 3/4" round dog holes for optimum clamping versatility.* Includes (4) plastic bench dogs.* Three mounting options: dowels, screws and clamps.* Clamps not included.

    0 Review(s)
    $148.99 $138.99
  8. Toggle Clamp Mounting Plate

    Toggle Clamp Mounting Plate

    …plate allows any of our toggle clamps to quickly and easily attach directly to a T-track. Just mount a toggle clamp to the plate, then affix the whole assembly to any T-track on the market. Use it to get the most out of your toggle clamps and any workbenches, tables, jigs or surfaces with T-tracks.…

    2 Review(s)
    $7.99
  9. Bessey K Body&reg Clamp Extender

    Bessey K Body® Clamp Extender

    Combine any two Bessey K Body Clamps and get enormous clamping capacity while retaining all the benefits of parallel clamping. Two 60" Clamps combined make a 120" K Body Clamp, long enough for the largest of cabinets! Durable aluminum construction ensures a rigid link with no twisting or unwanted…

    3 Review(s)
    $20.49
  10. Rockler T-Track Table Top

    Rockler T-Track Table Top

    Considering the wide variety of T-Track accessories available, the utility of theRockler T-Track Table Top is virtually limitless. Clamp objects at the edge of the table, in the center of the table and anywhere in between for fast, stable sawing, sanding, routing or assembly. Use it with any of our…

    $229.99
  11. 9'' Quick Release Workbench Vise

    9'' Quick Release Workbench Vise

    …out for easy attachment of wooden vise pads.* Features adjustable pop-up dog on vise face for clamping panels in conjunction with bench dogs.* Manufactured from close-grained cast iron.* With hardwood handle.* Vise faces are 2-7/8" high.* 7/8" screw diameter.* Easy to install on your workbench top.

    19 Review(s)
    $159.99
  12. Mini Deluxe Hold-Down Clamp

    Mini Deluxe Hold-Down Clamp

    At only 3" long, this compact version of our popular Deluxe Hold-Down Clamp is ideal for smaller work surfaces, such as benchtop router tables and shop-made jigs. Non-marring rubber tips are ideal for working with soft woods, pre-finished panels, or anything that's already been prep sanded.…

    1 Review(s)
    $4.99
  13. Small T-Handle Clamp

    Small T-Handle Clamp

    Once attached to a bench or fixture, this clamp works great as a quick-action hold down for jigs or as a simple way to secure a work piece. Its holding capacity is approximately 200 pounds. * Bottom of rubber foot adjusts from 1/4" above mounting surface to 3/8" below mounting surface. Total length…

    1 Review(s)
    $16.99
  14. 4-1/4'' Reach Hold-Down Clamp

    4-1/4'' Reach Hold-Down Clamp

    Use this clamp for wedging the workpiece against your bench. 4-1/4" reach. 8-1/4" long. 11/16" diameter.

    2 Review(s)
    $13.99
  15. Jet® Parallel Clamp Kit

    Jet® Parallel Clamp Kit

    Get two 24" and two 40" parallel clamps featuring the largest clamping surface in the industry – plus four framing blocks for squaring up assemblies and four bench dogs! Clamps feature a 4-1/8" jaw depth, jaws that can reverse to convert clamp to a spreader, and ergonomic handles with soft…

    $269.99
  16. Bench Accessory Kit

    Bench Accessory Kit

    …objects. Technical Details: Non-Slip Router Pad* 24" W x 36" L* Made of joined rubber squares* Black color Hold Down Clamps* 4-1/4" reach* 8-1/4" long* 11/16" diameter Rockler Bench Dogs* For all workbenches that have 3/4" dia. Holes* Low profile (7/16")* For working with 1/2" thick material and up

    16 Review(s)
    $27.99
  17. Kreg Jig K4MS Master System

    Kreg Jig K4MS Master System

    With a sturdy toggle clamp to secure your stock to the jig, and a large frontal clamping recess for securing the jig to the bench, you'll get perfect alignment every time. Thanks to the removable drill guide and portable base, you have the option of taking the jig to large work pieces and awkward…

    23 Review(s)
    $139.00
  18. 6-Piece Router Table Accessory Kits

    6-Piece Router Table Accessory Kits

    …C and D, large opening plates, Router Lift FX, and Bench Dog ProLift. Technical Details:* Table-mounted featherboard includes unique miter track clamps, which can be secured anywhere along the miter track with the twist of the knob.* Fence-mounted featherboards slip into the accessory T-track, and…

    1 Review(s)
    $49.99
  19. Bench Cookie Plus® T-Track Kit

    Bench Cookie Plus® T-Track Kit

    …Grippers!* Newly redesigned, these high-friction rubber pads hold your project rock-steady while sawing, sanding, or routing without the use of clamps.* New design features a 3/4" insert for various riser systems Bench Cookie Plus® 2" T-Track Risers:* Simply spin the Bench Cookies onto the…

    $54.97
  20. Bench Cookie® Plus Master Kit

    Bench Cookie® Plus Master Kit

    …threaded insert.* Bench Cookie® Plus measures 3" x 1".* Threaded insert accepts standard and XL Risers.* Rout, sand, cut and carve without using clamps.* Raise up workpieces for easy edge finishing.* Support projects without leaving marks.* Assemble projects on a stable, non-slip base.* Set up…

    8 Review(s)
    $63.92 $39.99

    SAVE 37%

  21. 6'' Clamp-On Bench Vise

    6'' Clamp-On Bench Vise

    …woodworking vise can be clamped or screwed onto a bench or other work surface. With 6" wide jaw and 4-1/2"jaw opening. Technical Details:* Main screw, guide rods and handle are chrome-plated for corrosion resistance.* Lightweight cast-iron body.* Toe-in feature provides even clamping pressure on the…

    8 Review(s)
    $39.99
  22. Sure-Foot® Conversion Pads

    Sure-Foot® Conversion Pads

    …a wider base to prevent tipping and raise clamp higher off bench for greater handle clearance. Technical Details:* Converts Pony-style 3/4" pipe clamps to Rockler's wide base Sure-Foot® design to prevent tipping.* Acts as a clamp pad.* Raises clamp higher off bench for greater handle clearance…

    16 Review(s)
    $4.99
  23. Small Push Clamp

    Small Push Clamp

    This clamp has a 100-pound holding capacity and works great with shop-made jigs, auxiliary fences, or simply for keeping a work piece secure. Attach it to a bench or fixture for convenient, versatile clamping. Technical Details:* Plunger travels 5/8".* Mounting plate is 1-1/16" W x 1-3/8" L.* Does…

    5 Review(s)
    $11.99
  24. Jet® 10'' Sliding Dua-Bevel Compound Miter Saw

    Jet® 10'' Sliding Dua-Bevel Compound Miter Saw

    …lightweight for easy transport* Versatile base can mount to a stand or work bench* Heavy-duty 15-amp motor for various cutting applications* Hold-down clamp ensures an accurate cut by stabilizing the work piece* Oversized ergonomic knobs provide ease of use and maximum control* Upfront controls for…

    $554.99
  • Items 1 - 24 of 82
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X