clamp guide

  • Items 1 - 24 of 94
  • Page:
    1. 1
    2. 2
    3. 3
  1. All-In-One Low-Profile Contractor Clamps, New & Improved!

    All-In-One Low-Profile Contractor Clamps, New & Improved!

    …and wider jaw for more stability! Wide lever handles and a click-lock sliding jaw make it simple to position and secure these clamps for use as a straight edge guide for circular saws and routers and as a fence for your table saw or drill press. A very low 17/32" profile body and flat top allow…

    89 Review(s)
    From: $41.99
  2. All-In-One Clamp Guide Package w/Free Squaring Attachment

    All-In-One Clamp Guide Package w/Free Squaring Attachment

    …with A and C Series All-In-One Clamp Guides. All-In-One Clamp Guides: * A straight edge guide that's simple to adjust.* Integral clamping jaws and locking lever provide a quick, easy way of clamping the guide.* Four lever positions for variable clamping strength.* Two clearly labeled scales…

    2 Review(s)
    $179.99 $89.99

    SAVE 50%

  3. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …can also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide bush and cutter selection chart; plus seven guide bushings to create mortise and tenons 1/4"- 5/8" thick.* For use with 1/4" shank straight router…

    $383.99
  4. Rockler 52'' to 104'' Low Profile Straight Edge Clamp System

    Rockler 52'' to 104'' Low Profile Straight Edge Clamp System

    …story stick* Power tool guide (one included with system) rides in the straight edge for total control when cutting or routing* Additional power tool guides sold separately* Acrylic base (#42279, sold separately) for use with saw or routers requires the Power Tool Guide Kit (#42173, sold separately).

    21 Review(s)
    $89.99 $67.49

    SAVE 25%

  5. Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    Rockler Universal Fence Clamps with Clamp-It® Square, Special Offer!

    …Fence Clamps, and it becomes a right angle fixture for bench assembly. Compact, lightweight clamps secure the Clamp-It® Square for tight 90 degree angle joints * Clamp-It® features a series of 3/8" holes to accommodate the Universal Fence Clamp Fence Clamps* Plus, the Universal Fence Clamps

    14 Review(s)
    $29.99
  6. Festool Guide Rails

    Festool Guide Rails

    …the correct Festool Guide Stop, they can work with Festool routers, plunge cut saws, jig saws and more. Technical Details:* Hard-anodized surface* Soft, non-slip coating* Hard rubber splinter guard* Mounting slot for: FSW angle unit, Connector for Guide Rails (482107), FSZ clamps, FS-AW Deflector

    From: $95.00
  7. MPower Combination Router Base CRB7

    MPower Combination Router Base CRB7

    …with edge guide rod drillings.* Adjustable Dadoing or Trenching with a clamp guide: Set the clamp guide once and adjust the position of the router via the CRB7's Micro Adjuster. The CRB also increases the reference surface between your router and the clamp guide, and reduces clamp guide set up…

    7 Review(s)
    $79.99
  8. 7'' Woodworker's Bench Vise

    7'' Woodworker's Bench Vise

    …and 8" jaw opening.* Solid steel guide rods reduce wear and tear, and give vises a smooth and true parallel action.* Square body seating provides easy fit under benchtop so jaws are flush with bench.* With 1/2" diameter handle.* Toe-in feature provides even clamping pressure on the whole depth of…

    9 Review(s)
    $89.99
  9. Rockler Clamp-It® Assembly Square 6-Pc. Kit

    Rockler Clamp-It® Assembly Square 6-Pc. Kit

    …5" Clamp-It® Clamps feature fixed heads with comfortable ergonomic handles.* Clamps have fixed heads with movable tail pieces.* Bar has anti-slip detents to prevent slippage when tightening.* Throat depth is 3/4" to clamp center on the assembly square.* Maximum clamping thickness when used…

    $52.99
  10. Squaring Attachment for All-In-One Clamp Guide (A and C Series Compatible)

    Squaring Attachment for All-In-One Clamp Guide (A and C Series Compatible)

    Ideal accessory for All-In-One Clamp Guides. Aluminum squaring attachment has extra wide jaws and provides accurate square-up for guide system. Measures 7/8" high x 3-3/4" wide.

    1 Review(s)
    $26.49
  11. All in One Clamp Guide Package, While Supplies Last!

    All in One Clamp Guide Package, While Supplies Last!

    …these Contractor Series clamp guides possess some unique features.* Simple to adjust* Features locking clamp pads* Four lever positions for variable clamping strength* Two clearly labeled scales in 1/8" graduations* The perfect woodworking combination clamp and edge guide system!* Wide body…

    37 Review(s)
    $159.99
  12. Rockler Heavy Duty Quick Release Front  Vise

    Rockler Heavy Duty Quick Release Front Vise

    …steel guide rods provide absolute resistance to racking, while an extra-wide 9" wide handle-plate delivers maximum stability to handle any project. Includes a solid hardwood handle. Wooden jaw plate not included. Additional features:* 3/4" diameter guide rods keep jaws parallel, even when clamping

    26 Review(s)
    $103.99
  13. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …high-density poly-ethylene construction, it can take accidental impacts that would normally damage or destroy an aluminum or MDF machine. The included clamping table features two hold-down slots for securing work anywhere along the length of the table. You supply a PC computer with USB 2.0 port and…

    21 Review(s)
    $2,899.99
  14. All In One Contractor Saw Plate

    All In One Contractor Saw Plate

    All in One Contractor Saw Plate attaches to the T-Tracks on Contractor Clamps (sold separately) and your circular saw to guide your saw and produce straight cuts every time. Easily fits many popular circular saws to provide uniformly accurate performance. Technical Details:* Measures 11" x 7-1/4"*…

    5 Review(s)
    $29.99
  15. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …FMT uses just one bit, one guide and one setup for every standard joint. It's that easy. There are no bit or guide changes to fuss with and the setup stays the same for both parts of the joint. Joint fit is easily adjusted for perfect results every time. Super FMT guides and bits allow you to create…

    3 Review(s)
    $529.00
  16. Nobex Proman Miter Saw

    Nobex Proman Miter Saw

    …molded table along with low friction blade guides increases the accuracy of every cut. Nobex Proman features pre-set lock stops for important angles in both directions making the angle setting quick and easy. The multi directional fast action clamp can be used in two positions holding the wood…

    4 Review(s)
    $129.99
  17. Rockler Concealed Hinge Router JIG IT®

    Rockler Concealed Hinge Router JIG IT®

    …drill press. Since your hinge mounting screws serve double-duty as clamps, setup is simple. Just screw it on, rout and repeat!* Can be adjusted for either 3mm or 5mm tabs.* Designed for Blum hinges.* Use with the 5/8" Short-Shank Guide Bushing, (specially designed for 1/4" template stock) and a 1/2"…

    10 Review(s)
    $17.99
  18. Rockler 12'' x 12'' Acrylic Base

    Rockler 12'' x 12'' Acrylic Base

    Ensure accurate ripping and shaping when used with the Power Tool Guide Kit (sold separately, sku: 42173) and the Straight Edge System (sold separately, sku: 36495)!* 12" x 12" x 1/4" thick acrylic* Keeps your router or circular tracked to the Straight Edge System* Dedicate one base for each router…

    2 Review(s)
    $16.99
  19. ''C'' Series All In One Contractor Router Plate

    ''C'' Series All In One Contractor Router Plate

    Plate features an attachment that fits the standard T-Tracks on Contractor Clamps (sold separately) to firmly guide your router in a straight line along the clamp. The 6" diameter plate attaches easily to many popular routers for consistent and uniform performance.This Router plate is predrilled to…

    1 Review(s)
    $38.39
  20. Rockler Complete Dovetail Jig

    Rockler Complete Dovetail Jig

    …base plate that accepts template guide bushings. * 8mm diameter bits are 25% larger than typical 1/4" bits, reduce chatter and fit all existing Rockler dovetail jigs.* Preset template and fence locations clearly marked for standard thickness stock.* Clamping bars include abrasive surface to grip…

    131 Review(s)
    $164.99
  21. Powermatic® Pneumatic Dovetail Machine

    Powermatic® Pneumatic Dovetail Machine

    …way to produce cleanly cut, professional dovetails that will enhance your products. The DT65 is complete with 1HP 230V 1 phase motor, pneumatic clamping, magnetic starter, carbide tipped cutter, and a four-sided template that produces dovetails on 1", 1-1/2", 2", and 2-1/2" centerlines. The use of…

    $6,425.99
  22. Mouse Hole Jig-It® for Movable Louvered Shutters

    Mouse Hole Jig-It® for Movable Louvered Shutters

    …small open-ended mortise that the shutter control arm swings into when the louvers are closed. Simple to use with a standard 1-3/8" template guide, just clamp and rout. The sturdy transparent jig makes it easy to line up with your pencil marks. Ready to build your own custom shutters with ease? View…

    1 Review(s)
    $14.99
  23. All In One Contractor Stop Block

    All In One Contractor Stop Block

    Works with Contractor Clamps (sold separately) to provide a stop for your circular saw or router when using the clamp as a guide. Plastic housing fits the T-Tracks of the Contractor Clamps and a wing nut tightens to secure the block in place at the desired position along the clamp.

    $22.59
  24. Rockler Clamp-It® Deluxe Kit

    Rockler Clamp-It® Deluxe Kit

    …of your clamping jobs with our original Clamp-It® system and the NEW Mini Clamp-It®! Deluxe Kit includes four full sets, including: * Two Clamp-It® Assembly Squares* Four 5" Clamp-It® Bar Clamps* Two Mini Clamp-It® Assembly Squares* Four 4" Mini Bar Clamps Clamping your projects…

    1 Review(s)
    $73.99
  • Items 1 - 24 of 94
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X