clamp rack

  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
  1. Rockler Pack Rack® Clamp & Tool Storage System

    Rockler Pack Rack® Clamp & Tool Storage System

    …even more storage space on top of the rack.* Additional Shelf-Hooks (20873) allow for more catchall interior storage.* Additional Clamp Rods (22130) add clamp-holding capacity.* Long Clamp Rods (20303) extend to the side, allowing you to store longer clamps.* Parallel Clamp Rack* Pack Rack Apron

    60 Review(s)
    $149.99
  2. Clamp Rack Combo, 3 Rack Set

    Clamp Rack Combo, 3 Rack Set

    clamps and save! This affordable Clamp Rack Combo keeps all your clamps safely stored and lets you attach themto the Pack Rack Tool Storage System (21834, sold separately).* F-Clamp Rack holds up to 15 clamps* Parallel Clamp Rack holds up to 12 clamps* Pipe Clamp Rack holds 9 clamps F-Clamp Rack*

    4 Review(s)
    $47.97
  3. Rockler F-Style Clamp Rack

    Rockler F-Style Clamp Rack

    …mounting to wall studs.* Slotted holes line up with the Pack Rack.* Constructed of sturdy galvanized steel for a lifetime of service.* 24-3/8" overall length.* Spacers between clamp storage slots measure 1.33" wide. Clamp storage slots measure .30" wide.* Rack may not accept all F-Style Clamps

    11 Review(s)
    $15.99
  4. Rockler Quick-Release Bar Clamp Rack

    Rockler Quick-Release Bar Clamp Rack

    …The pads on your clamps hook over the trough at the back of the rack, so they won't wobble free, and there's no need to close the clamps for storage. The clamp rack is drilled 16" on center for mounting to wall studs, and is also pre-drilled to mount to the Pack Rack Clamp and Tool Storage System…

    1 Review(s)
    $15.99
  5. Rockler Pipe Clamp Rack/Bar Clamp Rack

    Rockler Pipe Clamp Rack/Bar Clamp Rack

    …pipe clamps leaned up in the corner! This new clamp rack from Rockler puts your pipes firmly on the wall or on the Pack Rack (21834, sold separately) so you'll never have to hear your clamps clatter on the concrete again. The nine slots in the clamp rack are sized to accept pipe clamps, bar clamps

    12 Review(s)
    $15.99
  6. Rockler 24'' Parallel Clamp Rack

    Rockler 24'' Parallel Clamp Rack

    …parallel clamps - up to 12 in all - for easy and convenient storage. Pre-drilled holes are 16" on center for simple mounting to wall studs. Slotted holes are for attachment to the Pack Rack (21834, sold separately). Simply drill corresponding holes in the Pack Rack to attach the Parallel Clamp Rack

    9 Review(s)
    $15.99
  7. Top Cap for Pack Rack®

    Top Cap for Pack Rack®

    Steel Top Cap creates even more storage space on top of Rockler's Pack Rack Clamp & Tool Storage System.

    $15.99
  8. Additional Clamp Rods for Pack Rack® (Pack of 2)

    Additional Clamp Rods for Pack Rack® (Pack of 2)

    Clamp Rods create additional clamp-holding capacity for your Pack Rack® Clamp & Tool Storage System (21834 - sold separately).

    $12.99
  9. Irwin 4 Piece Parallel Clamp Set

    Irwin 4 Piece Parallel Clamp Set

    …that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the…

    1 Review(s)
    $175.96 $119.99

    SAVE 32%

  10. Gorilla Gripper Plywood Carrier

    Gorilla Gripper Plywood Carrier

    …the Gorilla Gripper clamps onto the top edge of the sheet, eliminating any bending or stooping, and allowing you to carry most sheet sizes with your hand comfortably locked in place over your shoulder. Simply slip it on, lift, and the Gorilla Gripper automatically clamps onto any stock from 0"-3/4".…

    6 Review(s)
    $52.49
  11. Rockler Beadlock® Pro Joinery Kit

    Rockler Beadlock® Pro Joinery Kit

    …precisely to accept a special Beadlock® loose tenon.* Ribbed tenon design prevents racking and increases the amount of face-grain glue surface.* Creates an extremely strong, totally concealed joint.* Integral clamp* Infinite adjustability* Constructed of heavy-duty 3/8" anodized aluminum with *…

    32 Review(s)
    $137.99
  12. Shelf Hooks for Pack Rack® (Pack of 4)

    Shelf Hooks for Pack Rack® (Pack of 4)

    Additional Shelf Hooks allow for more catchall interior storage. Use with the Rockler Pack Rack Clamp & Tools Storage System (21834, sold separately).

    $7.99
  13. Shop Improvements Book

    Shop Improvements Book

    …Magazine. 60 outstanding accessory and jig articles will fill your mind with ideas for things to add to your shop. Topics include workbenches, router jigs and fences, table saw extension tables, sawhorses and support stands, clamp and lumber racks, dovetailing jigs, storage solutions and more!

    $19.95
  14. Bessey Clutch Style F-Clamps

    Bessey Clutch Style F-Clamps

    …F-Style Clamp Rack (34302, sold separately).* Powder coated, ductile cast iron jaws.* 2-piece slip clutch plates.* Nickel plated, drawn serrated rail.* Non-marring pads on the top and bottom jaws.* Ergonomically shaped wood handle.* 2-1/2" throat depth.* Up to 600 lbs of clamping force.* Clamping

    From: $10.99
  15. Four Irwin Parallel Clamps w/Clamp Rack

    Four Irwin Parallel Clamps w/Clamp Rack

    …Parallel Clamps: With jaws that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The…

    $191.95
  16. Wilton Pivot-Jaw Woodworking Vise

    Wilton Pivot-Jaw Woodworking Vise

    Clamp a tapered object in a standard vise and the jaws will rack, leading to inadequate clamping pressure and premature wear on the screw. The Wilton Pivot-Jaw Vise solves this problem with a pivoting front plate that automatically adapts to any angle up to 10°. In addition, a sturdy U-channel…

    $199.99 $119.99

    SAVE 40%

  17. Irwin Parallel Clamp, 48"

    Irwin Parallel Clamp, 48"

    …that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the…

    27 Review(s)
    $47.99 $34.99

    SAVE 27%

  18. Rockler Heavy Duty Quick Release Front  Vise

    Rockler Heavy Duty Quick Release Front Vise

    …absolute resistance to racking, while an extra-wide 9" wide handle-plate delivers maximum stability to handle any project. Includes a solid hardwood handle. Wooden jaw plate not included. Additional features:* 3/4" diameter guide rods keep jaws parallel, even when clamping narrow objects on one side…

    26 Review(s)
    $103.99
  19. Irwin Parallel Clamp, 24"

    Irwin Parallel Clamp, 24"

    …that stay perfectly parallel, these clamps are ideal for accurate clamping of casework and drawers. The unique handle doubles as a clutch - just pull up to disengage. Clutch prevents clamp head from sliding down and pinching your fingers while on the clamp rack. The bar has no serrations, so the…

    28 Review(s)
    $39.99 $24.99

    SAVE 38%

  20. Dewalt DW682K Heavy-Duty Plate Joiner Kit

    Dewalt DW682K Heavy-Duty Plate Joiner Kit

    Heavy-Duty Plate Joiner Kit Technical Details:* 3 Year Limited Warranty* 6.5 Amp motor provides power for the hardest woods* Dual rack & pinion fence ensures blade & fence are always parallel for accurate joints every time* One-piece fence is adjustable and tilts 0-90°* 45° locating…

    $210.99
  21. FastCap® Best Fence System for Kapex Miter Saw-Best Fence Systems

    FastCap® Best Fence System for Kapex Miter Saw-Best Fence Systems

    …your saw for exact cuts every single time. Specially designed precision mounting blocks integrate with your existing Kapex miter saw. The blocks clamp directly onto the saw and place the fences in perfect position. Upper Hand supports raise the other end of the fence level with the saw and provide…

    $399.99
  22. Porter-Cable 895PK Multi-Base Router Kit Fixed and Plunge Base

    Porter-Cable 895PK Multi-Base Router Kit Fixed and Plunge Base

    …provides improved durability and bit visibility* Collets included to accept 1/4" and 1/2" shank bits* Release the motor, adjust bit height and clamp the motor from above the router table with model #75301 kit (included). Fixed base only.* Plunge base features machined brass bushings and steel…

    6 Review(s)
    $279.99
  23. Long Clamp Rods for Pack Rack® (Pack of 2)

    Long Clamp Rods for Pack Rack® (Pack of 2)

    Long Clamp Rods add the ability to hang larger clamps or hand screw clamps to the Pack Rack Clamp Rack. The heavy duty 5/8'' diamter steel rods measure 38'' long and extend 7'' beyond each side of the clamp rack when installed.

    $15.99
  24. Powermatic® Tilt Table Mortiser w/Stand

    Powermatic® Tilt Table Mortiser w/Stand

    …* Quick position table mounted swiveling vise clamp accommodates angled work pieces * Feed lever features size positions allowing for quick adjustments * Table and fence tilt from 0 to 35° for angled mortises * Gas cylinder controlled rack and pinion system for smooth head raising and lowering…

    1 Review(s)
    $1,274.99
  • Grid List
  • Page:
    1. 1
  • Items 1 - 24 of 24
  • Page:
    1. 1
Feedback X