shark cnc router

  • Items 1 - 24 of 65
  • Page:
    1. 1
    2. 2
    3. 3
  1. CNC Shark Pro Plus Routing System - Limited Quantities

    CNC Shark Pro Plus Routing System - Limited Quantities

    …compatible with the Bosch Colt Palm Router and includes a 1/2" diameter V-groove router bit. The CNC Shark also includes version 7.0 of the VCarve Pro software interface - a $600 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the…

    15 Review(s)
    $3799.99 $3499.99
  2. CNC Shark HD Version 2.0 Routing System

    CNC Shark HD Version 2.0 Routing System

    …special shipping exclusions apply. CNC Shark HD 2.0 is fully compatible with the following routers (sold separately):* Bosch 1617 and 1618* Porter Cable 890 Series* Porter Cable 690 Series (6902VS must be manually started)* DeWalt 610, 616, 618 FREE CNC Project Plans from Woodworker's Journal:*…

    $3999.99 $3899.99
  3. CNC Shark Routing System, with New 7.0 Software

    CNC Shark Routing System, with New 7.0 Software

    …apply FREE CNC Project Plans from Woodworker's Journal:* Butler's Tray* Weather Station* Cribbage Board Introducing CNCSharkTalk.com, a website presented by Rockler where CNC Shark users can chat together, watch how-to videos, ask questions, learn from each other and even show off their CNC Shark

    20 Review(s)
    $2899.99
  4. CNC Shark Black Diamond Edition w/FREE $50 Gift Card and Accessory Bundle

    CNC Shark Black Diamond Edition w/FREE $50 Gift Card and Accessory Bundle

    …Hold-down Clamps.* Mount for Router included (Router sold separately).* One year warranty on parts and labor, special shipping exclusions apply.* Download free project plans from Vectric* Made in the USA CNC Shark Black Diamond is fully compatible with the following routers (sold separately):* Bosch…

    0 Review(s)
    $4289.98
  5. CNC Shark Pro Plus

    CNC Shark Pro Plus

    …fully compatible with the Bosch Colt Palm Router and includes a 3/8" diameter V-groove router bit. The CNC Shark also includes VCarve Pro 7 and Cut3D design software a $900 value. You supply a PC computer with USB 2.0 port and a Bosch Colt router (router sold separately). Simply connect the USB…

    $3799.99 $3699.99
  6. Click-N-Carve CNC Carving Machine BE2015

    Click-N-Carve CNC Carving Machine BE2015

    For those looking for plug-and-play simplicity in a CNC router, look no further than the Click-N-Carve BE2015. Affordable, accessible and intuitive, the Click-N-Carve is the very definition of easy-to-use: simply load your photo, close the lid, and with only a few clicks, the BE2015 will be quietly…

    3 Review(s)
    $1599.99
  7. Freud 5-Piece Up Cut Spiral Router Bit Set

    Freud 5-Piece Up Cut Spiral Router Bit Set

    …razor sharp cutting edges.* Bits cut all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Up-Cut Spiral Bit (75-101)* Overall Diameter: 3/16"* Carbide Height: 3/4"* Shank Diameter: 1/4"* Overall…

    $159.97
  8. Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    Freud # 90-160 5-Piece Down-Spiral Solid Carbide Router Bit Set

    …keep bits handy and safe.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and tablemounted portable routers.* Features TiCo™ Hi-Density carbide for longer bit life and a flawless finish.* Perma-SHIELD®…

    $159.97
  9. Controller Bracket for CNC Shark

    Controller Bracket for CNC Shark

    …Rockler, the complete Rockler CNC Table w/Stand and Controller Brackets. * Ideal for use with our 28" x 40" Blank Top (45996, sold separately), which is theperfect size for CNC Shark routers.* Easy to access for emergency shut-downs.* Inside width of CNC Controller Bracket is…

    $19.99
  10. Dust Boot for CNC Shark

    Dust Boot for CNC Shark

    …sold separately). Dust Boot is compatible with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System Technical Details:* Designed to work with all CNC Shark routers except the the CNC Shark HD 2.0 (see 43650 if you need a dust boot for the HD 2.0).* Dust Boot measures…

    2 Review(s)
    $89.99
  11. Tungsten Ball Nose Bits for Click-N-Carve CNC Machines-Click-N-Carve Bits

    Tungsten Ball Nose Bits for Click-N-Carve CNC Machines-Click-N-Carve Bits

    …cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit the…

    0 Review(s)
  12. CNC Shark® Touch Probe

    CNC Shark® Touch Probe

    …with the CNC Shark models. Made in the USA. NOTE: To avoid accidents or injury, always be sure to unplug the router prior to attaching the Touch Probe. Touch Probe is compatible with the following machines: * CNC Shark Routing System * CNC Shark Pro Plus Routing System * CNC Shark HD 2.0 Routing…

    3 Review(s)
    $299.99
  13. CNC Shark Touch Plate

    CNC Shark Touch Plate

    …with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System* CNC Shark HD 2.0 Routing System Technical Details:* To use the CNC Shark Touch Plate, plug one end into the controller, attach the magnet to the collet, and lower the router bit onto the touch plate.* Durable…

    1 Review(s)
    $89.99
  14. Rockler 28'' x 40'' Table Top

    Rockler 28'' x 40'' Table Top

    …station, or an assembly table. It also works well as a table top for the Shark line of CNC routers. Pair it with your own shop-built base cabinet, or with our 24"W x 36"L Shop Stand (48089, sold separately). Also available from Rockler, the complete Rockler CNC Table w/Stand and Controller Brackets.

    $99.99
  15. Cut-3D Software for CNC Shark®

    Cut-3D Software for CNC Shark®

    …the CNC Shark Models andCNC Shark Touch® Probe to process image data into formatted programs that the Shark can read and execute as three dimensional carvings. Cut 3-D Software is compatible with the following machines:* CNC Shark Routing System* CNC Shark Pro Plus Routing System* CNC Shark HD…

    1 Review(s)
    $314.99
  16. End Mill Bits for CNC Carving Machines-Click-N-Carve Bits

    End Mill Bits for CNC Carving Machines-Click-N-Carve Bits

    …cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit the…

  17. Freud Base Cap Bits

    Freud Base Cap Bits

    …wide base molding. The wood species is up to you—use with hardwood or softwood to mill stain grade molding. Use with table mounted, CNC or automatic routers.* Note: For best results make two or more passes.* Routs a base cap measuring about 11/16" thick x 1-3/8" high.* Carbide is 1-3/4" dia. x…

    1 Review(s)
    $67.47
  18. Conical Ball Bits for CNC Carving Machines-Click-N-Carve Bits

    Conical Ball Bits for CNC Carving Machines-Click-N-Carve Bits

    …cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit the…

    0 Review(s)
  19. 1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

    1/4'' to 4 mm Collet Reducer for Click-N-Carve Bits

    …Click-N-Carve CNC Router Bits with the larger CNC Shark line of routers, as well as any other CNC router or handheld router with a 1/4" collet. It reduces the collet opening from 1/4" to 4mm to accept the smaller Click-N-Carve shank. The Click-N-Carve selection offers many unique router bits,…

    $6.99
  20. Freud Round Nose Bits-Optional Sizes

    Freud Round Nose Bits-Optional Sizes

    …cutting boards.* Add a personal touch to cabinet doors, drawer fronts, and fluted millwork, or use these bits to engrave wooden signs.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    2 Review(s)
    $34.97 From: $24.79

    SAVE 29%

  21. Freud Carbide Up-Spiral Router Bits

    Freud Carbide Up-Spiral Router Bits

    …chip removal with a cut that can't be matched by standard straight bits. Ideal for production settings.* Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods.* Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers.

    1 Review(s)
    From: $51.47
  22. Freud Canoe Joint Bits

    Freud Canoe Joint Bits

    …Application: Producing joints for curved projects such as circular planters and canoes.* Bit 99-017 cuts the flute and 99-018 cuts the mating bead.* Cuts all composition materials, plywoods, hardwoods, and softwoods.* Use on CNC and other automatic routers as well as table-mounted portable routers.

    From: $49.97
  23. Half-Conical Bits for CNC Carving Machines-Click-N-Carve Bits

    Half-Conical Bits for CNC Carving Machines-Click-N-Carve Bits

    …cut. NOTE: These bits can be used on any CNC router (including Shark models) or handheld router with a 1/4" collet when you also purchase the 1/4" to 4mm Collet Reducer (48789 - Sold Separately). Technical Details:* Solid Tungsten Carbide CNC router bit.* 4mm shank is designed to fit the…

    0 Review(s)
    $39.99
  24. Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    Rockler High Pressure Laminate Router Table, Fence, Plate, & Stand

    …24"W x 32"H.* Fence features a 2-1/2" O.D. (2-1/4" I.D.) dust port 1/4'' Aluminum Router Plates Pre-Drilled for Most Routers: To choose an aluminum plate, find your router in one of the four groups below. If your router is not listed, choose one of two non-drilled blank plates: the Standard Opening…

    3 Review(s)
    $349.99
  • Items 1 - 24 of 65
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X