tenon jig

  • Items 1 - 24 of 41
  • Page:
    1. 1
    2. 2
  1. Heavy-Duty Tenoning Jig

    Heavy-Duty Tenoning Jig

    Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is…

    68 Review(s)
    $117.99
  2. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    …Mortise and Tenon Jig! This unique jig sets up quickly on the ends of both pieces of stock, allowing you to cut the mortise and tenon using the same setup for a perfect fit in every joint. Set the center wall for your stock's thickness, align it with the jig, and set the mortise and tenon exactly…

    6 Review(s)
    $159.99
  3. Trend® Mortise & Tenon Jig

    Trend® Mortise & Tenon Jig

    …and square end tenons.* For 1/2"-2" thick material; maximum width 4".* Angle bar and main plate can be rotated from -10° to 45°.* Template can also be used for accurate doweling applications.* Includes all mounting hardware; four F-style clamps; mortise and tenon jig setup bar with guide…

    $383.99
  4. Rockler Beadlock® Pro Joinery Kit

    Rockler Beadlock® Pro Joinery Kit

    …on Beadlock® Pro, see this article:The New BeadLOCK Jigs - Affordable, Rock-Solid Joinery. Technical Details:* Beadlock® system overlaps drill bit holes precisely to accept a special Beadlock® loose tenon.* Ribbed tenon design prevents racking and increases the amount of face-grain…

    32 Review(s)
    $137.99
  5. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …plans for 5 useful workshop jigs. Warm up with the disc sander jig or the squaring jig for fast results. Then try the coping sled for clean, square rail-ends, throw the crosscut sled together for angled cuts on the table saw or build the tenoning jig for crisp tenons in almost no time. The choice…

    2 Review(s)
    $146.99
  6. Leigh FMT Pro Frame Mortise and Tenon Jig

    Leigh FMT Pro Frame Mortise and Tenon Jig

    …one jig setup. Make perfect joints for everything from match-stick frames and miniature tables (rout joints smaller than 1/4" - so tiny they're almost beyond belief!) to full-size chairs and 6-foot garden gates.* It's remarkably easy to set up perfectly aligned multiple mortises and tenons on the…

    8 Review(s)
    $1,049.00
  7. Leigh Louver Door Guides

    Leigh Louver Door Guides

    Now you can use your FMT to make precise louver doors with standard 1/4" x 1-1/4" louvers at a 45° angle. Matching tenons can be routed on the ends of louver stock or radiused louver stock can be routed to fit the mortise. Sold in left and right matching pairs. Note: New FMT guides not exactly…

    $51.99
  8. Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    Festool DF 500 Q Domino Joiner with New T-Loc Systainer

    …sized to accept a DOMINO loose tenon, creating an incredibly strong joint in stock as narrow as 7/8" wide! A universal joinery system with endless applications, the DOMINO is far stronger and more versatile than biscuits or dowels, and requires no cumbersome jigs and fixtures. Features precise…

    1 Review(s)
    $925.00
  9. Rockler 3/8'' Beadlock® Basic Starter Kit

    Rockler 3/8'' Beadlock® Basic Starter Kit

    …Details:* Beveled cutout in the drill plate allows you to precisely align the jig with your reference marks.* Handles stock thicknesses of 3/4" and up.* Includes all necessary hardware for cutting 3/8" joints. (Tenon stock sold separately.)* Storage case is molded with additional spacing for…

    30 Review(s)
    $29.99
  10. Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    Rockler 45° Lock Miter Router Bits - 1/2'' Shank

    …action that makes it much easier to clamp. There is no tendency for the joint to slide out of alignment under clamping pressure, and the wedged tenons tighten up nicely for a strong corner joint. The increased long grain gluing surface also helps to strengthen the joint over a basic rabbet or butt…

    From: $57.99
  11. Leigh M2 Multiple Mortise and Tenon Attachment

    Leigh M2 Multiple Mortise and Tenon Attachment

    Cut rows of perfectly fitted mortise and tenon joints! Leigh's M2, Multiple Mortise and Tenon Attachment brings multiple mortise and tenon joints within easy reach of any woodworker who owns a D4 Dovetail Jig and a plunge router with 1/2" collet. The adjustable guide fingers let you cut multiple…

    $268.99
  12. Leigh Super FMT Frame Mortise and Tenon Jig

    Leigh Super FMT Frame Mortise and Tenon Jig

    …guides and bits allow you to create any size mortise and tenon from a tiny 1/16" x 1/8" to a massive1/2" x 5". Includes five 5/16" joint guides (5/16" by 1/2", 3/4", 1", 1-1/4" and 1-1/2"), that can make over 21 sizes of mortises and tenons. Additional features:* Universal sub-base that attaches to…

    3 Review(s)
    $529.00
  13. Beds Book

    Beds Book

    …include: Clear step-by-step instructions to build Cut lists that make it easy to get each bed started Exploded and measured drawings that A chapter on general construction show every detail strategies for building any bed design A wide range of jigs for mortising, tenoning, and other common tasks

    $24.95
  14. Domino Self-Centering Guide

    Domino Self-Centering Guide

    The ideal accessory for your Festool Domino® 500 Q Joiner! The Domino Self-Centering Guide lets you change stop positions quickly and easily on your Domino without tools or measuring! A steel coupling cable keeps both stops always centered around the Domino mortise location. Infinitely…

    $129.00
  15. Dowelmax Classic Doweling Jig

    Dowelmax Classic Doweling Jig

    …that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The system creates quick, easy accurate and strong joints using 3/8" dowels in virtually any configuration that can be flush, offset, mitered,…

    2 Review(s)
    $249.00
  16. Incra Build-It System Components

    Incra Build-It System Components

    …can create a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign…

    2 Review(s)
    From: $10.99
  17. Leigh Super FMT  Accessory Kit

    Leigh Super FMT Accessory Kit

    Bring the versatility of over 70 mortise and tenon size settings to your Leigh FMT or Super FMT Jig. Kit includes a Vacuum Box, two hose adaptors and three HSS bits; 1/4", 3/8" and 1/2". Also includes eight 1/4" guides, four 3/8" guides and four 1/2" guides.

    $215.00
  18. Leigh Louver Spiral Upcut Bit

    Leigh Louver Spiral Upcut Bit

    1/4" high-speed steel (HSS) spiral upcut bit for use with the Leigh Louver Door Guide Set (33649, sold separately) on the Leigh FMT Frame Mortise and Tenon Jigs (sold separately). The 1/4" Louver bit has a 1/2" shank to stand up to the added forces of cross-grain routing. 3/4" cutter depth.

    $20.99
  19. 1x Miller Quick Drill Kit - Each

    1x Miller Quick Drill Kit - Each

    …methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design.* In this method, pieces of wood…

    8 Review(s)
    $34.99
  20. Dowelmax Jr. Doweling Jig

    Dowelmax Jr. Doweling Jig

    …that can be completed in as little as 5 minutes, and that are independently destructive test proven to be stronger than comparable mortise and tenon joints. The Dowelmax Jr. device consists of the core components of the world famous Dowelmax Classic and is the best system on the market for creating…

    1 Review(s)
    $99.00
  21. Vacuum Box kit for the Super FMT

    Vacuum Box kit for the Super FMT

    Control debris for cleaner operation of your Leigh Super FMT Jig. Kit contains the Vacuum Box and two hose adapters for hoses from 1" to 2-1/2" in diameter.

    $49.00
  22. 5mm Shelf Pin Supports

    5mm Shelf Pin Supports

    …sleeves (sold separately) both come in packs of 16. * Pin Supports have a spoon (paddle) design with a 5mm diameter shaft.* Tenons on pin supports are 8mm; overall pin length is 19mm.* These supports with or without sleeves are perfect for use with JIG IT shelf drilling system - sold separately.

    6 Review(s)
    $3.59
  23. Mini-X Quick Drill Kit

    Mini-X Quick Drill Kit

    …methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design.* In this method, pieces of wood…

    7 Review(s)
    $25.99
  24. 1X Miller Dowel System with Clamp-It® and 2 Mini Clamps

    1X Miller Dowel System with Clamp-It® and 2 Mini Clamps

    …methods like blind dowels, biscuits, pocket screws, or mortise and tenon. There is one timesaving assembly technique that is made possible by MILLER Dowels. A Chicago woodworker developed this as an alternative to the mortise and tenon joinery in his furniture design. * In this method, pieces of…

    7 Review(s)
    $64.66
  • Items 1 - 24 of 41
  • Page:
    1. 1
    2. 2
Feedback X