turning lathes

  • Items 1 - 24 of 219
  • Page:
    1. 1
    2. 2
    3. 3
  1. Excelsior Mini Lathe

    Excelsior Mini Lathe

    The Excelsior 5-Speed Mini Lathe can turn bowls of almost 10" in diameter and spindles up to 17-3/4" in length, making it perfect for chair legs, small table legs and an endless array of decorative turnings. A convenient door provides easy access to the belt, along with 5 different speeds: 760,…

    46 Review(s)
    $299.99 $249.99

    SAVE 17%

  2. Woodturner's Multi-Roll Sanding Pack

    Woodturner's Multi-Roll Sanding Pack

    …a smooth-as-silk finish. Includes four rolls of J-weight, cloth-backed sandpaper in 150, 240, 320, 400 and 600 grits.* Great for sanding on the lathe, plus can be used for any other woodworking project that requires a small piece of sandpaper.* Impregnated with aluminum oxide for long life.* Each…

    2 Review(s)
    $19.99
  3. Nova Comet II 12'' x 16-1/2'' Midi Lathe

    Nova Comet II 12'' x 16-1/2'' Midi Lathe

    …In addition, Nova's unique Versaturn™ Adaptable Technology, paired with the optional accessory attachments, transforms the lathe into an all-in-one wood turning and woodworking system. Features of the Nova Comet II:* Electronic variable speed motor offers a wide RPM range from 250 to 4000 RPM…

    2 Review(s)
    $499.99
  4. Excelsior Mini Lathe Replacement Belt

    Excelsior Mini Lathe Replacement Belt

    Replacement belt for the Excelsior Mini Lathe (33207, sold separately). Available online only.

    1 Review(s)
    $9.99
  5. Jet® 14'' x 42'' Wood Lathe with Stand

    Jet® 14'' x 42'' Wood Lathe with Stand

    This mid range lathe offers mechanical variable speed along with a headstock that pivot as well as slide to the end of the bed for outboard turning capabilities.* Reeves drive pulley system allows quick variable speed changes from 450 to 3,000 RPM* Heavy-duty cast-iron lathe bed adds stability while…

    $1429.99
  6. Jet 1221VS 12'' x 21'' Variable Speed Wood Lathe

    Jet 1221VS 12'' x 21'' Variable Speed Wood Lathe

    …made before. In truth, it's different from anything that anybody has ever made before. The design is better. The features are better. The entire turning experience is better. And it all focuses on one concept: control. Features:* Free one-year online AAW membership with purchase* Unrivaled speed…

    1 Review(s)
    $799.99
  7. Ready-to-use Turning Stock-2" x 2" x 30"

    Ready-to-use Turning Stock-2" x 2" x 30"

    The ready-to-use turning stock is square, rough sawn and ready for the lathe. Stock is ideal for turning spindles, finials, bun feet or for carving projects. The stock is approximately 2" square and available in 30" lengths. Choose from cherry, maple, oak, or walnut. May include sap wood. Technical…

    10 Review(s)
    From: $9.99
  8. Lathe Duplicator

    Lathe Duplicator

    turned projects. This Lathe Duplicator attaches easily to almost any floor-model lathe, and the handwheel allows for smooth operation while cutting.* Will duplicate to a maximum length of 39" (depending on the lathe used)* Maximum duplication depth-of-cut of 2-3/8"* Suitable for lathe with a turning

    14 Review(s)
    $331.99
  9. Pen Turning Mandrel, #1 Morse Taper

    Pen Turning Mandrel, #1 Morse Taper

    …essential tool for pen turning on a lathe! Machined-accurate steel bar is held in the lathe to ensure the pen turns accurately with live center, no drill chuck required! This Pen Turning Mandrel system includes a #1 morse taper arbor for use with a #1 morse taper lathe, 7 mm mandrel shaft and…

    $15.99 $9.99

    SAVE 38%

  10. Bowl Turning, Fine Woodworking DVD

    Bowl Turning, Fine Woodworking DVD

    …and modify chisels and gouges, mount bowl blanks on the lathe, rough out the bowl shape, work end grain, control warp in thin-walled bowls, and design bowl forms.* Del Stubbs has been a turner and teacher for more than 30 years.* He turns everything from architectural spindles and classic vases…

    2 Review(s)
    $20.99
  11. Jet® 12'' x 35.5'' Wood Lathe with Stand

    Jet® 12'' x 35.5'' Wood Lathe with Stand

    …machine - the JET JWL-1236 is a dream tool for any lathe enthusiast. Featuring a 3/4-hp motor that handles increased capacities easily, this lathe can maintain consistent rpm through a much wider range of turning situations. Heavy-duty cast-iron lathe bed adds stability while limiting vibration…

    3 Review(s)
    $919.99
  12. Ceiling Fan Pull Chain Turning Kit

    Ceiling Fan Pull Chain Turning Kit

    Turn an ordinary pull chain into a hand-turned masterpiece with the Pull Chain Turning Kit for ceiling fans. Simply drill your blank (sold separately), install the brass tube into the blank, and turn it on your lathe with Mandrel "A" (43537, sold separately). The included chain clips right onto the…

    $2.29
  13. Robert Sorby Micro Gouge Blade

    Robert Sorby Micro Gouge Blade

    This 1/2" wide blade for the Robert Sorby Modular Handle is perfect for general purpose smoothing and shaping on the lathe. High speed steel.

    $20.99
  14. Beer Tap Component Hardware - Beer Tap Ferrules

    Beer Tap Component Hardware - Beer Tap Ferrules

    ''Turn'' your beer taps into one-of-a-kind masterpieces with a bit of creativity, a quick spin on the lathe, and this high quality hardware. Beer tap ferrules are used to attach your turned wood handle to your beer tap faucet. Add elegance to your tap setup when you combine a desired ferrule with…

    1 Review(s)
    $4.99
  15. Nova 1624-44 16'' x 24'' Lathe

    Nova 1624-44 16'' x 24'' Lathe

    …Nova 1624 Lathe boasts the most power, versatility and features of any comparable mid-range lathe. Its swiveling headstock rotates a full 360°, and locks at any position for outboard turning of large items. The powerful 1.5 HP motor delivers 50% more power than comparable lathes, and features…

    $1399.99
  16. Jet® 16'' x 42'' Wood Lathe 2HP

    Jet® 16'' x 42'' Wood Lathe 2HP

    This, the largest of the JET lathes, is a real powerhouse. With electronic variable speed and a sliding head, you can turn bowls up to 16" over the bed, even larger projects off the end and 42" spindles standard. Turn even longer projects with the optional bed extension.* Digital readout allows…

    $2649.99
  17. Rockler Lathe Tool Rests

    Rockler Lathe Tool Rests

    …finger along the edge of Rockler's premium Lathe Tool Rests, and you'll know instantly what a pleasure they are to use. That's because each tool rest is capped with a 5/16" round stainless steel bar, providing a silky smooth surface for your turning tools to glide across, and a comfortable contour…

    4 Review(s)
    From: $19.99
  18. Crystal Coat

    Crystal Coat

    Perfect for turned pens! Get a sophisticated, high-gloss finish that's also water- and wear-resistant. Quick, easy and no-mess! Can be applied to turnings right while they're on the lathe! Easy-to-use 6-ounce bottle. Designed as a final finish coat. Food-safe when dry.

    6 Review(s)
    $12.99
  19. Trout Laser-Cut Inlay Pen Blank

    Trout Laser-Cut Inlay Pen Blank

    Challenge yourself with this fun 11-part, laser-cut Trout Inlay Pen Blank and turn it to size for an incredibly colorful pen! The kit is composed of 11 pieces of dyed and stabilized black ash burl, American Holly, dyed pink curly maple, and curly maple and are inlaid into position to become a…

    1 Review(s)
    $21.99
  20. Carter Multi-Rest™ Work Support System

    Carter Multi-Rest™ Work Support System

    …MultiRest™ provides three strong, helping hands for the most challenging of turnings: big bowls, long vessels, and narrow spindles. Slide the support wheels up against your turning project and flip on the lathe to enjoy unequaled stability and whisper-quiet operation. Each ball-bearing roller…

    $359.95
  21. Wooden Bowls from the Scroll Saw

    Wooden Bowls from the Scroll Saw

    Make several types of beautiful wooden bowls with just your scroll saw! Craft custom wooden bowls and more without a lathe or turning tools. Additional projects include a vase, a ginger jar and a candy dish. 128 pages.

    $19.95
  22. Lathe Chuck and Tapers

    Lathe Chuck and Tapers

    …or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on a lathe to hold a mandrel for turning wood pens and pencils. Note: Chuck shown with a Morse Taper installed

    9 Review(s)
    From: $16.99
  23. Crown 5 Piece Full Size Turning Set

    Crown 5 Piece Full Size Turning Set

    With five of the most popular turning tools, this set is perfect for the beginning wood turner. Technical Details* Pre-honed for immediate use* Perfect for the beginning wood turner* High-speed steel blades will hold an edge and last a long time* Each tool measures approx. 15" long* Made in England

    4 Review(s)
    $227.99
  24. Making a Peppermill - Focus on Design,  DVD

    Making a Peppermill - Focus on Design, DVD

    …beautiful mill that you'll be proud to display or give as a gift. You'll learn elements of design that apply to all your projects on the lathe. You'll also learn to turn salt mills and salt shakers. Bonus "Goody Box" section contains valuable supportive clips that will aid you in design and added…

    7 Review(s)
    $31.49
  • Items 1 - 24 of 219
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X