woodworking jigs

  • Items 1 - 24 of 252
  • Page:
    1. 1
    2. 2
    3. 3
  1. Rockler Deluxe Drawer Pull JIG IT®

    Rockler Deluxe Drawer Pull JIG IT®

    Rockler exclusive JIG IT® template makes marking screw holes for knob and pull installation quick, simple and accurate.* Offers spacing for 2-1/2", 3", 3-1/2", 3-3/4", 4" and 96mm.* Includes 24" aluminum T-slot bar, left to right self-adhesive tape measure, stop block for repetitive drawer pull…

    28 Review(s)
  2. Incra Build-It System Components

    Incra Build-It System Components

    …can create a huge variety of jigs and fixtures. Modular system allows you to interchange parts for anything from simple shooter boards to deluxe crosscut, miter and coping sleds. It's perfect for expensive specialty items like tenoning jigs. Unlike conventional jigs, you can add features or redesign…

    2 Review(s)
    From: $10.99
  3. Rockler Long Stop for Rockler T-Track System

    Rockler Long Stop for Rockler T-Track System

    Combined with your T-Track Table, these stops give you a fast, accurate work holding solution for a wide variety of applications. The stops feature low-profile knobs that fold flat for easy clearance when belt sanding, hand planing, or scraping dried glue. Long Stops are also ideally suited…

  4. Rockler Bench Dog® 1/4'' Shelf Pin Jig

    Rockler Bench Dog® 1/4'' Shelf Pin Jig

    Get level, wobble-free shelves, every time with the new Bench Dog Shelf Pin Jig. The jig is compact and portable, yet works with the tallest of cabinets. Just use the included index pin and self-centering drill bit to daisy-chain your shelf holes to whatever length desired. Can be used when the back…

  5. Heavy-Duty Tenoning Jig

    Heavy-Duty Tenoning Jig

    Safety, accuracy and repeatability are the hallmarks of this heavy-duty tenoning jig. Designed to fit any table saw with a 3/4" x 3/8" miter groove, this jig will hold your stock in precise position. The adjustable back stop will support stock from 0 degrees to 45 degrees. The width of the cut is…

    68 Review(s)
  6. UHMW Plastic Jig Stock - 3/4'' Thick

    UHMW Plastic Jig Stock - 3/4'' Thick

    …is your best material choice for making jigs and fixtures for your table saw, router table, drill press, etc. UHMW is a linear high density polyethylene that's 10x heavier than regular high-density polyethylene giving you a rock-solid base for your jig or fixture. UHMW has a low coefficient of…

    8 Review(s)
  7. Blum Slide Jig Gun

    Blum Slide Jig Gun

    You're ensured perfect frameless or face frame installations of Blum epoxy coated drawer slides by simply positioning the jig. Quick, accurate, easy, and absolutely level every time. Technical Details:* Used for positioning cabinet profiles on cabinet sides * Holds cabinet profile in place while…

    7 Review(s)
  8. Rockler Concealed Hinge Router JIG IT®

    Rockler Concealed Hinge Router JIG IT®

    Now you can machine 35mm hinge cup holes with your router instead of a drill - a nice option when you don't have space for a drill press. Since your hinge mounting screws serve double-duty as clamps, setup is simple. Just screw it on, rout and repeat!* Can be adjusted for either 3mm or 5mm tabs.*…

    10 Review(s)
  9. Dow'l Simp'l Kit

    Dow'l Simp'l Kit

    Swing-arm doweling jig allows you to easily make three types of joints: right angle, edge to edge and edge to surface. Simple to use, the Dow'l Simp'l Kit assists you in centering and aligning dowels on stock that is nominally 5/8", 3/4" and 1" thick. * No adjustments necessary to accommodate stock…

    1 Review(s)
  10. Dowelmax 1/4'' Drill Guide Package

    Dowelmax 1/4'' Drill Guide Package

    …Classic and Dowelmax Jr. to use with 1/4" dowels in narrower 1/2" and 5/8" stock. Technical Details:* Components are made of top quality aluminum, brass, and hardened steel* Precision-machined to a tolerance of 0.002"* Requires Dowelmax Classic or Dowelmax Jr. doweling jig

    1 Review(s)
  11. Rockler Router Table Box Joint Jig

    Rockler Router Table Box Joint Jig

    For use on virtually any router table with a standard 3/4" miter slot, this jig features a smooth-sliding backer sled and three precision-machined aluminum indexing keys to give you air-tight joints with either 1/4", 3/8" or 1/2" spacing. Works with stock up to 3/4" thick. * For compatibility, the…

    61 Review(s)
    $79.99 $59.99

    SAVE 25%

  12. Kreg Drawer Mounting Brackets

    Kreg Drawer Mounting Brackets

    …box into the drawer opening so it balances on the brackets and pull the slide to the front of the drawer box. Drive screws and you're done!* Works with Kreg Universal Drawer Slide Mounting Jig (#38444).* Includes left and right brackets.* Bracket measures 10" long x 4" high x 1-1/2" wide.* Plastic.

    1 Review(s)
  13. Kreg Jig K4MS Master System

    Kreg Jig K4MS Master System

    …sturdy toggle clamp to secure your stock to the jig, and a large frontal clamping recess for securing the jig to the bench, you'll get perfect alignment every time. Thanks to the removable drill guide and portable base, you have the option of taking the jig to large work pieces and awkward locations…

    23 Review(s)
  14. JIG IT® Shelving Jig w/Self-Centering Bit

    JIG IT® Shelving Jig w/Self-Centering Bit

    …separately. * Drills holes either 1-7/16" or 2-1/2" from edge. * Insert shelf pin in top or bottom position to extend jig for continuous drilling.* Shelving Jigs measure 20" long* Provides exact set back for shelf pin holes of 37mm (1-7/16") or 64mm (2-1/2"). * Included hex wrench is…

    188 Review(s)
  15. Rockler Taper / Straight Line Jig

    Rockler Taper / Straight Line Jig

    …chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. * Measures 31-5/8" x 7-3/4".*…

    45 Review(s)
    $77.99 $57.99

    SAVE 26%

  16. E-Z Pro Mortise and Tenon Jig

    E-Z Pro Mortise and Tenon Jig

    …E-Z Pro Mortise and Tenon Jig! This unique jig sets up quickly on the ends of both pieces of stock, allowing you to cut the mortise and tenon using the same setup for a perfect fit in every joint. Set the center wall for your stock's thickness, align it with the jig, and set the mortise and tenon…

    6 Review(s)
  17. 4210 Porter-Cable 12'' Dovetail Jig

    4210 Porter-Cable 12'' Dovetail Jig

    jig allows for cutting half-blind, rabbeted half-blind, and sliding dovetails. Its patented alignment lines and router bit depth stop improve accuracy and make setup quick and easy, while heavy duty cam-type clamps with sandpaper-backed locking bars hold the workpiece firmly in place. The jig

    2 Review(s)
  18. 30" Aluminum T-Track

    30" Aluminum T-Track

    Replacement aluminum T-track is just the right length for use with the JIG IT® Multi-Tool Rail Master Pack (31126, sold separately).

  19. Distinctive Series Dovetail Templates, Style B

    Distinctive Series Dovetail Templates, Style B

    …for 4", 5", 7" and 10" widths. Setup is easy as can be; just install the template and start routing. Compatible with the current Rockler Dovetail Jig (22818). Includes templates, knobs and T-bolts. Click the "More Info" tab above to see more Distinctive Series templates for the Rockler Dovetail Jig.

    1 Review(s)
  20. Leigh Y-Axis Mortise Guides

    Leigh Y-Axis Mortise Guides

    Use your Leigh FMT to flip your mortises on their sides! Some joints, like dust dividers in a chest of drawers, require mortises to be routed at 90° to the clamp plate. The new Y-Axis mortise guide can produce six sizes of mortises: 1/4" x 3/8", 1/4" x 1/2", 1/4" x 3/4", 5/16" x 1/2", 5/16" x…

  21. The Way to Woodwork: Woodworking's Critical Path CD from Woodworker's Journal

    The Way to Woodwork: Woodworking's Critical Path CD from Woodworker's Journal

    With the CD "Woodworking's Critical Path: The Complete Curriculum," you get a compilation of everything master woodworker Ian Kirby has taught on the subject of woodworking. Containing over 70 lessons and over a dozen projects, the CD covers everything from selecting and preparing stock; to marking…

  22. Rockler Thin Rip Tablesaw Jig

    Rockler Thin Rip Tablesaw Jig

    jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig

    104 Review(s)
  23. Woodsmith Box Joint Jig

    Woodsmith Box Joint Jig

    The Woodsmith Box Joint Jig attaches to any miter gauge and works on any table saw or router table. The box joint jig provides an easy, accurate way to get perfect-fitting box joints. Use the Freud Box Joint Cutter Set (sold separately, 27371) to make precise joints on your table saw, or our 4-Piece…

    16 Review(s)
  24. Incra Build It Starter Kit

    Incra Build It Starter Kit

    …Build-It System Components and plans for the following jigs. Wooden fence material can be made out of scrapwood and modified to suit your needs.* Adjustable Angle Crosscut Jig* Coping Sled* Disc Sander Jig* Shooter Board Squaring Jig* Tenoning Jig Features:* (1) Large Build-It Panel* (1) Small…

    2 Review(s)
  • Items 1 - 24 of 252
  • Page:
    1. 1
    2. 2
    3. 3
Feedback X