Zinsser Bulls Eye® SealCoat™  Zoom

Zinsser Bulls Eye® SealCoat™

Item #: 61646
$15.79
Quart In Stock
Guaranteed to be compatible with all finishes, Bulls Eye SealCoat won't raise the grain and dries in minutes.
Shipping Restrictions: Ground Transportation Only

Overview

This is the only sanding sealer you will ever need! It gives depth and beauty to wood grain, and won't raise or swell the wood grain. 100% wax-free formula dries in minutes and sands easily.

Please note that this item can only be shipped by UPS Ground to addresses within the continental United States other than California. This item cannot be shipped to California.



Zinsser Bullseye® SealCoat™ dries to the touch in 10 minutes and is ready to sand/recoat in 40 minutes! Plus it's compatible with all clear finishes. Easily cleans up with ammonia and water.Guaranteed Compatible with ALL Finishes
  • Alkyd-modified polyurethane
  • Water-base acrylic polyurethane
  • Catalyzed Finishes
Super Fast Dry Time
  • Dust-free in 5 minutes
  • Dry to touch in 10 minutes
  • Ready to sand/recoat in 20-40 minutes
Other Great Features
  • Fast drying pre-stain conditioner
  • Bond coat over stearated finishes
  • Gives depth and beauty to wood grain
  • Will not raise or swell wood grain
  • Will not turn yellow or darken with age
  • Can be applied in temps as low as 0 degrees Fahrenheit

Tech Spec

Brand Zinsser
Manufacturer Part Number ZI0854
Weight (lbs) 2.0900
Dry Time 20-40 min
Size Quart

Technical Downloads:

Reviews

Customer Reviews

9 Review(s)

View All

A good base for uniform stain application

Don Posted October 8, 2014
I use SealCoat®, diluted with alcohol, to seal wood before application of gel stain. It works great, producing a uniform result by minimizing differences in wood grain, knots, etc. I highly recommend you try this product.

A Pleasure to work with

Robert Posted August 12, 2014
Goes on easy, dries fast, and excess sands off easy. Also tried Cabot's, what a gummy mess.

Despite the prominent label "Sanding Sealer,"...

Keith M from Cincinnati, OH Posted January 1, 2011
Despite the prominent label "Sanding Sealer," it is simply a 100% dewaxed amber shellac. It appears to have some proprietary solvents that increase shellac's normal pot life of 6-12 months to several years. I buy it by the gallon and use it to add depth to wood. Sometimes, it's the only finish I use and sometimes, it's just a good first coat under another finish. It's a good barrier coat for silicone contamination refinishing PledgeR damage, urine smells, knot resin, and musty odors. I have refreshed several antique pieces by simply first cleaning and sanding, then applying a couple of coats of this. For just an hour's work, the piece comes back to life.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X