$17.99 Each
In stock

1-1/4''W Rectangular Recessed Ring Pull, Polished Brass

Item #
47261
Rating:
100% of 100

Commonly called "campaign hardware", this line of gorgeous recessed brass hardware serves both to beautify and to protect your furniture and surrounding items. The term "campaign hardware" derives from the 18th and 19th centuries, when English officers demanded high-quality, portable furniture while on military marches. The recessed hardware and brass corners allowed furniture to nestle together in a compact stack, and prevented scratches while stowed in the back of a bumpy horse-drawn wagon. Once unpacked and in the tent, however, the furniture served as a beautiful reminder of home.


Installation and Care Instructions:
  • Measure and mark hole fixings with a pencil, preferably onto a strip of masking tape that will help to steady the drill.
  • Drill a pilot hole as a lead for the wood screw.
  • Remember, the included wood screws are made of brass so never overtighten or attempt to drive without a pilot hole, as this can cause them to break off in the wood.
  • Occasional use of a damp cloth, and the use of quality wax polish is recommended to maintain the lustre.


Related Products

We recommend using our JIG IT® Routing Template to make installation of these pulls accurate and easy.
(1) 1-1/4''W Rectangular Recessed Ring Pull, Polished Brass
(4) 5/8'' Brass Screws
More Information
Weight 0.0500
Tech Spec
  • Solid brass recessed ring pull
  • Polished finish
  • Dimensions: 1-1/4"W x 1-1/2"H
  • Total depth: 7/16"
  • Inside diameter of ring pull: 11/16"
  • Projection from surface (if surface-mounted): approximately 1/8"
  • Can be surface-mounted or mortised flush with the surface
Knob Diameter 11/16"
Finish Brass
Finish Polished Brass
Pull Length 1-1/4"
Projection 11/16"
Type Ring Pulls
Style Campaign Hardware
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Recessed pull.
The Rockler recessed pull was the solution to the issue that I had with a project that required a 14" square "plug" to be pulled from a counter top.
July 10, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Worked Great!
User submitted image
User submitted image
April 28, 2018
Purchased
1 year ago
Very attractive and sturdy.
I inserted this brass ring pull into a door. I was concerned that the screws were too short to hold it securely, but they are fine. The pull does require you to chisel out a slot for it to fit into, and the slot will not be even, because the center of the ring is round and deeper than the sides, which are flat. There are no dimensions to tell you how deep the hole needs to be (and mine is now placed into the slot, so I can't tell you the exact measurements either, but it is about 1/4").
December 26, 2017
Purchased
1 year ago
Recessed ring pull
Perfect for my application and reasonably priced
August 7, 2017
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Why did you choose this?
Rockler Store
Needed for an oak floor access to crawl space panel in the floor
Thomas M on Aug 9, 2019
Wanted it
John P. M on Nov 8, 2017
Needed for an oak floor access to crawl space panel in the floor
Thomas M on Aug 9, 2019
Because I needed them!!!
Herman A N on Dec 22, 2018
Wanted it
John P. M on Nov 8, 2017
Because I needed them!!!
Herman A N on Dec 22, 2018
I am looking for a drawer pull similar to this 1 1/2" wide X 1 3/4 long? Any help would be appreciated. Tom
Tom A on Jan 3, 2018
BEST ANSWER: The biggest hurdle was recessing the pull. I took some time to make a template out of 3/16" masonite for a plunge router with a collar to make it fit. I then used a forestner bit to recess the area for the ring. Practice first. This worked out well. The pull works well. I used on window seat lids. Greg