1/2'' Baltic Birch Plywood
Our 1/2'' thick baltic birch plywood features quality one-piece plies for exceptional strength and screw holding power.
Each sheet of our 1/2'' Baltic Birch Plywood is constructed from high-quality, one-piece birch laminations for exceptional strength and screw holding power. The density of the plies (40% more plies than standard plywood) results in excellent stability, while the increased thickness of the face plies means far more resistance to sand-through. All-birch cores have little to no voids—sand the edges for a nice, finished look. Faces may contain some matched plugs, and one face is light and even in color for an attractive finished face. Available here in several sizes and quantities. See our other offers for different thicknesses (1/8'', 1/4'', 1/2'' and 3/4''). All dimensions are nominal and may be slightly undersized.
Grade BB/BB: Both faces are relatively "void free" but may contain small patches and a slight knot pattern or mineral streaks. One face is light and even in color. Open knots and defects in a BB face veneer have been removed and replaced with small uniform ''football'' patches before being glued. The end result is a strong plywood that is attractive enough to be used on a variety of projects.
One piece was patch free, the remaining five had at least one patch on each side near the center of the board, & one side had four patches within a 9" radius, all in the center of the board. Junk. Attached is a .jpg of my favorite board. I needed all of this material for my project. a waste of money...