$25.99 Each
In stock

3-5/8''W Rectangular Recessed Pull, Polished Brass

Item #
44138
3-5/8''W Rectangular Recessed Pull, Polished Brass 3-5/8''W Rectangular Recessed Pull, Polished Brass
3-5/8''W Rectangular Recessed Pull, Polished Brass

Commonly called "campaign hardware", this line of gorgeous recessed brass hardware serves both to beautify and to protect your furniture and surrounding items. The term "campaign hardware" derives from the 18th and 19th centuries, when English officers demanded high-quality, portable furniture while on military marches. The recessed hardware and brass corners allowed furniture to nestle together in a compact stack, and prevented scratches while stowed in the back of a bumpy horse-drawn wagon. Once unpacked and in the tent, however, the furniture served as a beautiful reminder of home.


Installation and Care Instructions:
  • Measure and mark hole fixings with a pencil, preferably onto a strip of masking tape that will help to steady the drill.
  • Drill a pilot hole as a lead for the wood screw.
  • Remember, the included wood screws are made of brass so never overtighten or attempt to drive without a pilot hole, as this can cause them to break off in the wood.
  • Occasional use of a damp cloth, and the use of quality wax polish is recommended to maintain the lustre.


Related Products

We recommend using our JIG IT® Routing Template to make installation of these pulls accurate and easy.
(1) 3-5/8''W Rectangular Recessed Pull, Polished Brass
(4) 3/4'' Brass Screws
More Information
Weight 0.2500
Tech Spec
  • Height: 2''
Finish Brass
Finish Polished Brass
Pull Length 3-5/8"
Projection 1-/8"
Type Cabinet Pulls
Style Campaign Hardware
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Why did you choose this?
Rockler Store
Decorative hardware for my toy box.
Ron H on Jan 30, 2019
Decorative hardware for my toy box.
Ron H on Jan 30, 2019
How deep will the recess need to be cut into the mounting surface?
Jeremy H on Mar 9, 2018
BEST ANSWER: My piece is completed so I can't confirm how deep to cut the recess. My wood was 3/4 red oak veneer and I probably only had to cut approx. 1/2 " at most. You definitely need some sharp chisels and a couple of forester bits to clean out the cut out. There is very little margin for error in the size because the hinged handles are only 1/8" below the face plate top edge so your cut "box" needs to be right on or you will have a gap along the top of the plate. I took my time and they came out great but it was a time consuming job.