$39.98 Kit
In stock
Gives you maximum control while routing, jointing and ripping.

Bench Dog® 3-Piece Safety Kit with Additional Ultra Push-Bloc

Item #
46076
Rating:
82% of 100
Bench Dog® 3-Piece Safety Kit with Additional Ultra Push-Bloc
Bench Dog® 3-Piece Safety Kit with Additional Ultra Push-Bloc

Maximize comfort and control when feeding material through your table saw, jointer or router table with this well-rounded Safety Kit. The Feather-Loc featherboard keeps stock tight against your fence, helping to prevent kickback, while the Magnetic Push Stick aids in keeping your hands and fingers away from the blade, then stores easily using the built-in magnet. Two Ultra Push-Blocs give you excellent grip and control when feeding stock, and allow you to use two hands to keep the stock moving and minimize burning.


Feather-Loc Featherboard Features:
  • Keeps stock tight against the rip fence
  • Attach to your fence to keep the workpiece from lifting
  • Attaches to T-slots or to a standard 3/8'' x 3/4'' miter slot with the included Miter Slot Adapter
  • Ergonomic T-knobs for easy, comfortable adjustments
  • Heel-end can also be used as a stop
  • Built-in setup feather makes setting the tension fast, easy and repeatable
  • Rounded feather tips won't mar your workpiece

Magnetic Push Stick Features:
  • Ergonomic handle with lightweight plastic blade
  • Inset magnet allows for storage on the side of your tablesaw
  • Angled tip easily accommodates various thicknesses of wood

Ultra Push-Bloc Features:
  • Large, comfortable handle for a sure grip
  • Non-marring rubber bottom uses the same high-friction rubber surface found on our Bench Cookie™ Work Grippers
  • Provides maximum control while routing, jointing, and ripping
(1) Feather-Loc Featherboard
(1) Magnetic Push Stick
(2) Ultra Push-Blocs
More Information
Brand Bench Dog
Manufacturer Part Number N/A
Weight 2.9500
Tech Spec
  • Material: Polymer/composite
  • Push Stick Length: 12''
  • Featherboard Reach (from edge of track): Approximately 6-1/4''
Tech Docs N/A
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.1 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
2
0
0
1
Excellent
Push stick with magnetic handle keeps it where you need it. Bright colors of the items is a reminder to use them and the versatility they offer in different situations.
July 18, 2018
Purchased
3 months ago
Woodworking Experience:
Intermediate
Very comfortable and stable
These were a great deal and I am glad I bought them. The magnet on the push stick I was indifferent about but I have grown to really appreciate the design and convenience.
July 13, 2018
Purchased
3 months ago
Woodworking Experience:
Beginner
JoJo Bakersfield California
Recommend this probuct
January 13, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
SEE REVIEW
GOOD STUFF GOOD PRICE WORKS GOOD BEST PUSH BLOCKS I HAVE EVER USED
September 3, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Featherboard with the SawStop
There have been times when making adjustements to the featherboard prior to the rip cut, the front bar comes out of the t-track quite easily which can be annoying while adjusting the rear knob. I know that the rear knob expands the bar to keep it in position. I just which that the front also held it a little tighter without slipping. I’ve had to pause my rip cuts to reposition my hands for advancing the cut and accidentally had the featherboard come up slightly. This is during times when I’m not using a featherboard on my rip-fence and applying force down with my push-block.
September 9, 2018
Woodworking Experience:
Advanced
Keeping fingers
This sure is better than the wood push sticks I rigged.
August 28, 2018
Purchased
2 months ago
Woodworking Experience:
Advanced
wrong size for craftsman saw
wrong size for craftsman saw - no option to buy correct part - should have had that warning - I would not have bought this
July 25, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 22 answers
Why did you choose this?
Rockler Store
Always good to have an extra push block and I want to try the feather board in the table saw
Thomas D on Aug 16, 2018
Needed these for my table saw
Tomas N on Aug 10, 2018
Always good to have an extra push block and I want to try the feather board in the table saw
Thomas D on Aug 16, 2018
Safety while ripping stock
Paula S on Aug 11, 2018
Needed these for my table saw
Tomas N on Aug 10, 2018
It was a good deal at the sale price.
Eric C on Aug 9, 2018
My 20-year old daughter has taken an interest in woodworking and I wanted her to practice safety around the miter saw and table saw.
Hector J. R on Aug 9, 2018
great deal on a good product
greg s on Aug 9, 2018
I need it
Rodney C on Aug 5, 2018
A president for my brother
Bruce B on Aug 3, 2018
upgrading to more useful safety items and bright colors to enhance using them, plus is really much better than what I have now.
Phillip L. H on Jun 25, 2018
great value
JOSH J on Jun 21, 2018
Just starting out using router, wanted proper safety equipment
Bruce L on Jun 15, 2018
I have purchased a push-block earlier and like the quality of the product.
Louis P on Jun 6, 2018
safety
Normna H on Mar 27, 2018
Someone gave me a table saw without these item. I need them. If they do not fit my saw, I will return.
Lewis G on Nov 22, 2017
i needed additional safety features at my table saw
Stephen N on Aug 18, 2017
I needed some new push sticks Safty First
Scott C on Aug 16, 2017
Safety
Larry B on Jul 9, 2017
For the sale on having 2 plush blocks and with the push stick that comes in handy.
Jesse L on Jun 22, 2017
I need them and I have read the good reviews
Joel N on Jun 20, 2017
Safety while ripping stock
Paula S on Aug 11, 2018
It was a good deal at the sale price.
Eric C on Aug 9, 2018
What is the review talking about Craftsman saw-I don't understand why it wouldn't work? My saw is craftsman is why I ask.
Gary H on Jun 16, 2018
BEST ANSWER: I have a Craftsman contractor table saw and these work great for me. The featherboard is adjustable to fit the miter track for many sizes so I’m not sure about why the review says doesn’t work for Craftsman. I think it most likely is adjusted wrong. It works for several of my stationary power tools.