Store Locator
Special Price $19.99 Each $39.99 Each
In stock
QTY

Get Expert Advice

Return Policy

3200-Lumen Metal 4' LED Shop Light

An easy, efficient and long-lasting lighting solution—emits 3,200 lumens to illuminate the darkest corners of your shop.

Item #
61165
Rating:
84% of 100

Whether you use it in the shop, garage, laundry room or utility room, this 4' LED utility light makes a great replacement for those outdated fluorescent fixtures. The LEDs are rated to last for 50,000 hours, and at 3200 lumens, emit very bright light. They operate well in cold weather, with no delay, and you don't have to worry about breakage, mercury leakage, or tube disposal as you do with fluorescents.

Features:

  • Instant on in cold weather
  • Quiet operation—no annoying hum or buzz
  • 5' main power cord plugs into outlet
  • 7-1/2'' easy on/off pull chain switch
  • Includes (2) 12'' hanging cables with clips
  • (1) 3200-Lumen Metal 4' LED Shop Light
  • (2) 12'' hanging cables with clips
More Information
Brand Stonepoint
Manufacturer Part Number SL4PV-3200N-MS
Weight 16.5000
Tech Spec
  • Lumens: 3200
  • Watts: 32
  • CCT: 4000K
  • CRI: 80
  • Efficacy: 100
  • LED Life: 50,000 hrs
  • Beam Angle: 120°
  • Power Factor: 0.9
  • Operating Voltage: 120
  • Operating Temperature: -4~113° F
  • Cord Type/Length: 18/3 SVT, 5 ft
4.2 / 5.0
19 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
14
0
2
1
2
very happy
I have a 10x8 shed that I use for a finishing station.I zipped tied it to the beam. this is a great improvement to the past light.
Pat
October 4, 2019
Purchased
2 months ago
Woodworking Experience:
Advanced
Very happy
Very good light. I didn't realize it was just one bulb and didn't think it would be enough light. I was wrong. Illuminates my workbench well.
September 9, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Bright
Works great and puts out lots of light.
September 8, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
LED Light
Previously worked with a standard 4’ fluorescent light over my bench until I purchased the LED. The difference in lighting is amazing. I purchased another LED for my workshop.
September 2, 2019
Purchased
3 months ago
Woodworking Experience:
Beginner
Lights worked as they should, and were like all the reviews stated.
August 31, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
They put out a lot of light in the shop.
August 31, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
LED overhead shop light
My new lights provided extra brightness to my work areas in my shop. It really helped my old eyes.
August 24, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Very bright lite
I see things I did not know they were there before.
August 5, 2019
Purchased
4 months ago
Woodworking Experience:
Intermediate
Great light color light and power
replaced the old double fluorescent shop light with better lighting and easier to install and maintain
August 3, 2019
Purchased
4 months ago
Woodworking Experience:
Intermediate
Worth the price when on sale.
I was initially disappointed with the overall size, but after putting them up I am very pleased with the lights. They put out plenty of bright light.The mounting hardware is flimsy, but adequate. I have them plugged into switched outlets. Wouldn't trust the mounting hardware to hold the lights if pull chain were to be used.
July 21, 2019
Purchased
4 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 46 answers
Why did you choose this?
Rockler Store
Good lighting
Frank M on Nov 5, 2019
Converting from fluorescent to LED to get more efficient lighting in shop
MIKE G on Oct 31, 2019
Good lighting
Frank M on Nov 5, 2019
I recently had purchased 6 of the fixtures for my shop and I really like them and I needed one more t finish my lighting of my shop.
Jerry I on Nov 5, 2019
Converting from fluorescent to LED to get more efficient lighting in shop
MIKE G on Oct 31, 2019
I have old florescent bulbs and I have to replace the bulbs about every six months. I would like to try these and to see if they will light up my shop better.
Jerry I on Oct 31, 2019
Switching to LED to save electricity. Good price.
Cheryl L on Sep 26, 2019
Good price
gary s on Sep 16, 2019
Recommended by friend
Thomas M on Sep 9, 2019
Needed extra-bright light over router table.
Mikaol on Sep 3, 2019
Previously purchased similar lights from Rockler have provided excellent lighting in the shop around multiple tools.
Thomas Y on Sep 2, 2019
Because it's not too bright but it gives just enough bright light for my shop.
Steven M on Aug 28, 2019
been wanting led
robert c on Aug 24, 2019
Existing figures needed replacement and wanted to have the brightest lighting for the area.
Albert B on Aug 20, 2019
Brightened my shop area wonderfully.
Bruce B on Aug 17, 2019
To replace old shop lights
Melvin M on Aug 13, 2019
bought one before, works great, need another one, very happy
Alfonso H on Aug 12, 2019
I liked my 1st one so much that I wanted to continue with another in my workshop.
Chad S on Aug 11, 2019
replace old fluorescent fixture over workbench
Robert B on Aug 10, 2019
I need additional light over a newly installed counter and over a newly designated area for my dovetail jig.
Daniel E. C on Aug 10, 2019
Replacing fluorescent lighting
Timothy W on Aug 10, 2019
Chose because they were on sale for 50% off.
Henry R on Aug 10, 2019
Better light for my drill press and bench vise.
Bruce B on Aug 2, 2019
What I have looking for!
Everett P on Aug 1, 2019
Good price
Cathie W on Jul 31, 2019
Research, comparison
L P K on Jul 15, 2019
Have purchased 4 last month-----Wanted 2 more after seeing them -----They are doing a good job !
David H W on Jul 15, 2019
My shop is still evolving, and good light is hard to acquire.
Chad S on Jul 1, 2019
Attractive price to convert to LED light in a utility space
Paul P on Jul 1, 2019
Price which is the same reason I bought the previous unit.
Richard Stitt A on Jun 30, 2019
Sale
Jim C on Jun 30, 2019
I already have 4 of these and am very happy with the product. You can always use more lightning
Dave V on Jun 25, 2019
Needed additional lighting over the shop table saw and this filled the requirement.
Louis G on Jun 23, 2019
I need a good light over my lathe
Charles C on Jun 22, 2019
old 4 ft finally burnt out
alfonso h on Apr 9, 2019
I need lights in my new shop
Marvin D on Mar 6, 2019
I recently had purchased 6 of the fixtures for my shop and I really like them and I needed one more t finish my lighting of my shop.
Jerry I on Nov 5, 2019
I have old florescent bulbs and I have to replace the bulbs about every six months. I would like to try these and to see if they will light up my shop better.
Jerry I on Oct 31, 2019
Can the lights be mounted to ceiling and direct wired?
ART W on Mar 20, 2019
BEST ANSWER: That is the way my are mounted.
Can these be direct wired to 120v (rather than plugged into an outlet)?
chrispix on Aug 12, 2019
BEST ANSWER: Yes, you can use the plug-in cord as the conductor. Remove the plug end, strip back the conductors leaving about 1/2 inch of wire without insulation. Connect the conductors to the correct point of power. If you haven't done this type of work before, it may be best to use an electrician.
What type of socket do these have?
Steve S on Aug 10, 2019
BEST ANSWER: The bulb itself has the same two pin configuration as the old fluorescent.. The fixture plugs into a regular North American wall socket. I have mine plugged into a socket I placed over my workbench. This light replaced my old two bulb 4 ft fluorescent fixture and provides much more light. I hope this answers your question.