Special Price
$29.99
Each
$49.99
Each
In stock
This light is not linkable.
5000-Lumen 4' LED Shop Light
Emits 5,000 lumens of bright, white light to illuminate the dimmest corners of your shop.
Item #
53571
This 5,000-Lumen 4' LED Shop Light is ultra-bright, long-lasting, and incredibly energy efficient. It makes an ideal lighting solution for shops, garages, laundry rooms and other work areas where task lighting is crucial. It's also an excellent upgrade for those expensive, fragile fluorescent tubes that flicker and fail all too quickly. Thanks to an LED life of 50,000 hours, the light can be left on for eight hours a day for over 17 years.
Features:
- Includes two 12'' hanging chains for easy installation
- Easy on/off with the 6-1/2'' pull chain
- No hum and no mercury
- Bright white light is very easy on the eyes
- Full-brightness in an instant, even in cold weather
(1) 5000-Lumen 4' LED Shop Light
(2) 12'' hanging chains
(2) 12'' hanging chains
| Brand | Stonepoint |
|---|---|
| Manufacturer Part Number | SL4P-5000N |
| Weight | 2.6500 |
| Tech Spec |
|
| Discountable | Yes |
4.9 / 5.0
248 Reviews
LED Lighting
The 4' LED shop light performs as expected. I bought this product due to the 5000 Lumen rating and I am very pleased with the results. I installen them in my wife's craft area and above my layout table; the light quality is great. Due to the low starting temperature, I may purchase additional units to install in the garage.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
5000-lumen 4-foot LED shop light
I rewired eight dual-bulb four foot florescent light fixtures in my shop and converted them to LED. The bulbs I used are rated at 5000-lumen and 5000K in the color spectrum. There were two areas that had less than ideal lighting, so i decided to add two more light fixtures. At the sale price of $29.99 each, the decision to try these Rockler 5000-lumen lights was an easy one to make. Although not quite as bright as the dual bulb converted fixtures, I find the Rockler 4000K, 5000-lumen LED fixtures produce a more natural color lighting, which I prefer to the starkness of the 5000K LED bulbs. Thus far the Rockler fixtures have operated flawlessly, and their installation could not be easier. I highly recommend these light fixtures to anyone seeking to add light to their workspace, or to upgrade their existing lighting.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Worth the money
Great shoplight. Easy to install and very bright.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Bright light
Love this bright light. Purchased 2 to reduce shadows which now allows me to see detail on projects I am working on.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
shop light
they seem to work fine. lots of light
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great light if you can get it on sale
Very good light that replaced three other fixture I put somewhere else
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Nice, bright lite.
These are easy to mount. The only problems are 1) you need a duplex outlet to plug it into and 2) the cord is pretty stiff.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
exactly what I needed
I have used regular fluorescent bulbs in my shop for a long time but have had some trouble with enough light when doing detailed work or inlays. The addition of this light plus a 3200 lumen LED light on either sides of my work benches has almost eliminated shadow issues on the inlay bench and provides a really good light over both work areas.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 17 questions
Browse 17 questions
and 127 answers
Why did you choose this?
Rockler Store
A woodworker friend had this light in his workshop and I was impressed with the color/output of the light.
Troy B
on Feb 18, 2020
Bought one and it was really bright and easy to put up. I wanted my entire shop to have that kind of light
Ken R
on Jan 28, 2020
A woodworker friend had this light in his workshop and I was impressed with the color/output of the light.
Troy B
on Feb 18, 2020
Have one in my laundry room, love it. I’m putting two more in my garage and later two more in my basement. The fixture is small in its look and puts out a good light at low wats.
Dennis P
on Feb 3, 2020
Have one in my laundry room, love it. I’m putting two more in my garage and later two more in my basement. The fixture is small in its look and puts out a good light at low wats.
Dennis P
on Feb 3, 2020
more light for the over 70 crowd! More light, fewer watts... what's not to like!
Thomas S
on Jan 26, 2020
Are these lights hard wired or plug in? And if they are plug in, are they linkable (can they be plugged into each other)?
BEST ANSWER: Hard wired, not linkable.
- Reply
- Inaccurate
- Tom F on Aug 20, 2018
- Purchased on Jun 1, 2018
Can it be mounted directly to a wall without using the hanging chains ?
BEST ANSWER: You probably could, but it would take some modifications. Given how the plastic snap-on brackets are mounted to the light, I would mount the lights horizontally so they would not slide down as they might if you mounted them vertically.
- Reply
- Inaccurate
- Rick on Dec 14, 2018
- Purchased on Nov 21, 2018
Can these lights be surface mounted or are they chain hung only?
BEST ANSWER: Possibly.
Definitely designed to be hung. The switch is a chain and the power cord sprouts out from the top of the fitting. I'm also not sure if owing to heat disposition or some other safety precaution you should deviate from that arrangement. However mine just arrived and I would say it is entirely possible to mount direct to a surface. The hooks that attach the chain are just bolted into a plastic clip that then snaps onto the light, so they can be unscrewed and those clips attached directly. You're only issue will be the power cord would need some sort of recess. Better bet would be to add a simple stand off to the surface you're mounting the light to then screw the snap on bracket to that. The light is very low weight so does not seem like it would slide within clips but it's possible you would need to put a ledge underneath if orientating vertically on a wall (think shelf bracket) to prevent.
Definitely designed to be hung. The switch is a chain and the power cord sprouts out from the top of the fitting. I'm also not sure if owing to heat disposition or some other safety precaution you should deviate from that arrangement. However mine just arrived and I would say it is entirely possible to mount direct to a surface. The hooks that attach the chain are just bolted into a plastic clip that then snaps onto the light, so they can be unscrewed and those clips attached directly. You're only issue will be the power cord would need some sort of recess. Better bet would be to add a simple stand off to the surface you're mounting the light to then screw the snap on bracket to that. The light is very low weight so does not seem like it would slide within clips but it's possible you would need to put a ledge underneath if orientating vertically on a wall (think shelf bracket) to prevent.
- Reply
- Inaccurate
- JohnS on Dec 10, 2017
Do you need to pull the chain to turn them on each time or could you use a wall switch to power a receptacle without having to reach of to the chain?
BEST ANSWER: I have mine plugged into a switched outlet. The chain stays on and The Light is turned on/off at the door.
- Reply
- Inaccurate
- Mux on Dec 13, 2017
- Purchased on Nov 23, 2017
What is the temperature of the light?
BEST ANSWER: Mine are hanging in an unheated detached garage so right now they are around 25 degrees.
If you are talking about color temperature, then the "Technical Details" list it at 4000K which is categorized as "Natural White" as opposed to "Warm White" which is around 2700K. I find higher Kelvin temperature lighting to be best for a workshop environment.
If you are talking about color temperature, then the "Technical Details" list it at 4000K which is categorized as "Natural White" as opposed to "Warm White" which is around 2700K. I find higher Kelvin temperature lighting to be best for a workshop environment.
- Reply
- Inaccurate
- Randy L on Jan 17, 2018
- Purchased on Nov 22, 2017
Are these dimmable?
BEST ANSWER: NO ! They are not dimmable and to do so would void the warranty. (per the instruction sheet)
- Reply
- Inaccurate
- Steveguy on May 15, 2018
- Purchased on May 6, 2018
Anybody know if these lights work in low temperatures? I want to put one or two in my garage where it gets down to below zero at times.
BEST ANSWER: These lights don't have a ballast like fluorescent lights. They work perfectly in my shop; which is usually between 35° - 40°...until I turn on the Salamander.
- Reply
- Inaccurate
- Stephen on Dec 16, 2017
- Purchased on Nov 23, 2017
Warranty ?
BEST ANSWER: 3 years limited warranty on this one.
- Reply
- Inaccurate
- James G on Dec 29, 2017
- Purchased on Dec 21, 2017
What is the thickness/depth and width of this light?
BEST ANSWER: The width is 2 3/4 and the depth as best I can measure at the center is 1 3/16 at the thickest part, The cord exits on the back at one end. It appears these are made for hanging and not a flush mount arrangement. I bought them to replace older flouresent bulbs in my garage but I haven't hung them yet.
- Reply
- Inaccurate
- Daniel F on Apr 30, 2018
- Purchased on Nov 22, 2017
Are the light tubes replaceable?
BEST ANSWER: John, there are no light tubes. The LEDs are not replaceable but rated to last 50K hours (17 years at 8 hrs per day) according to the manufacturer. I have only had mine for a couple of months but expect them to last as long as I need without replacing tubes. My experience has been great. I added them to a darker area of my garage shop and boy do they work. They are the brightest lights in my shop, the others are standard fluorescents.
- Reply
- Inaccurate
- James K on Jan 5, 2018
- Purchased on Nov 23, 2017
Does this light have any kind of shield on the sides to direct the light down and block the bright bulb from blinding a person's vision when looking at it from the side?
BEST ANSWER: I have the lights hanging from the ceiling so blocking/shielding the light from the sides isn't needed for me. Great bright light though!
- Reply
- Inaccurate
- Stephen on Nov 20, 2018
- Purchased on Nov 23, 2017
I have a 28 by 32 garage I use as a wood shop with 9 foot ceilings. How many 4 foot fixtures would be needed?
BEST ANSWER: My shop is about the same size as yours with 12 foot ceilings. I use this light over one part of my workbench for detail work. I have five larger lights over the rest of the shop. I would guess that you need at least five of these lights to illuminate your entire shop. I'm no lighting specialist; however, I'd recommend a larger style of light with at least two bulbs in each light.
- Reply
- Inaccurate
- Lee on Aug 12, 2018
- Purchased on Nov 23, 2017
What is the total length of the fixture? Is it exactly four feet, or is that the length of the light?
BEST ANSWER: The length is a bit more than 4 ft. It provide a very good light, better that the 4" florescent it replaced. I recommend it.
- Reply
- Inaccurate
- bob z on Nov 27, 2019
- Purchased on Nov 23, 2017
How long is the power cord?
BEST ANSWER: 6 feet. it is in complete description under Techinal Details
- Reply
- Inaccurate
- Tom H on Aug 9, 2018
- Purchased on Nov 23, 2017
In what low temp will they not turn on? I live in Wisconsin and want to put a few of these style LED lights in my barn in place of my halogen
BEST ANSWER: operating temperatures are -4 to 113 degrees Fahrenheit
- Reply
- Inaccurate
- chip on May 23, 2018
- Purchased on Nov 23, 2017
How fragile is the bulb if bumped. Compare to florescent bulbs of same length. Or is there a protective casing?
BEST ANSWER: Light has a protective casing around the bulb. Not going to bump it on purpose.
- Reply
- Inaccurate
- Gary C on Dec 15, 2017
- Purchased on Nov 23, 2017
Related Products
