Store Locator

Barrel Cleaner/Pen Mill Kit

One plunge cleans out any glue residue inside the tube, and also flushes and squares the end of the tube with the pen blank.

Item #
47526
$41.99 Each
In stock

Get Expert Advice

Return Policy

One plunge with this pen mill will clean out any glue residue inside the brass tube, and simultaneously flush and square the end of the tube with the blank. This provides a perfectly flat surface for the bushings and pen parts to seat against. Assembling your pen will be much easier, with parts that mate perfectly!

Barrel Cleaner/Pen Mill Details:

  • Includes 3/4'' diameter barrel cutter for flushing ends of blanks with tubes
  • Four pilot shafts included: 7mm, 'O' size, 3/8" and 10mm
  • Adapter tube slips over the 7mm pilot shaft, increasing the diameter to fit tubes that require an 8mm diameter hole in the blank

(1) Barrel Trimmer Cutter Head
(1) 7mm Pilot Shaft
(1) O-Size Pilot Shaft
(1) 3/8'' Pilot Shaft
(1) 10mm Pilot Shaft
(1) 8mm Adapter Tube
(1) Hex Wrench

More Information
Manufacturer Part Number RZ-PM043-6E
Weight 0.350000
Tech Spec
  • Barrel Trimmer Diameter: 3/4''
  • Pilot Shaft Diameters: 7mm, 'O' size, 3/8'' and 10mm
  • Adapter Tube: For trimming tubes that require an 8mm diameter hole in the blank
Type Barrel Cleaner, Mill

Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.