Store Locator
$899.99 Kit
In stock
  • There is an additional $20.00 shipping charge for this item.
QTY

Get Expert Advice

Return Policy

Bench Dog® Cast Iron Router Table, Pro Fence & Pro Lift Router Lift

Premium-quality cast iron top—complete with a fence and the award-winning Pro Lift Router Lift!
Item #
59562
Rating:
80% of 100

Meet the ultimate router table! At 24'' x 32'' x 1-1/2'', the cast iron top is the largest, flattest, and most durable option on the market. It is built from one solid piece of cast iron to absorb vibration better than any table on the market. It provides more than five square feet of ultra-flat, precision-ground work surface. Plus, this package includes the award-winning Rockler Pro Lift with Quick-Gear rapid height adjustment and tool-free Snap-Lock insert rings (see below for more details). Topped off by the 32'' ProFence, a precision-milled aluminum fence with two MDF sub-fences, jointer bars, front and rear T-tracks, a 2-1/2'' dust port and an integrated bit guard.


Features:

  • Dual T-tracks in the table: a standard miter slot and a Universal T-track for accessories
  • Cast iron top provides over five square feet of surface area
  • Universal T-tracks accept 1/4'' and 5/16'' T-bolts as well as 1/4'' hex bolts – perfect for hold-downs, stops, featherboards and more
  • 32'' Pro Fence is precision machined for flatness and squareness and includes front- and rear-mounted universal accessory T-tracks

Includes the award-winning Rockler Pro Lift with Quick-Gear rapid height adjustment and tool-free Snap-Lock insert rings!

Two patent-pending features raise the Rockler Pro Lift into a class of its own: ultra-fast ''Quick-Gear'' height adjustments and ''Snap-Lock'' tool-free insert ring changes. Push the button to release the insert ring, then wind the Quick-Gear to raise the bit above the table in just seconds. Once the bit is installed, quickly lower it, click in the insert ring, and use the fine adjustment gear to set the final height to within 0.001''. Anti-backlash mechanism keeps the router from creeping downward—lock knob provides further insurance when running very large jobs. Heavy-duty steel construction with bronze bushings and a 3/8'' thick machined aluminum plate.


Lift Adaptors available for smaller router motors!

Optional adapters are available that allow the Pro Lift to accept routers with smaller motors. If you are unsure of your router motor's diameter, check the manual, or measure the circumference with a tailor's tape. The collars have an expansion gap, so they will accept motors measuring 1/8'' larger or smaller in diameter than the listed spec.

  • 3-1/4'' Pro Lift Adapter Collar (#50098, sold separately) accepts motor with 3-1/4'' diameter or 10.21'' circumference
  • 3-1/2'' Pro Lift Adapter Collar (#57022, sold separately) accepts motor with 3-1/2'' diameter or 11'' circumference
(1) Bench Dog® Cast Iron Router Table Top with hardware
(1) 32'' Bench Dog ProFence
(1) Bit guard
(1) 2-1/2'' Dust port
(1) Rockler Pro Lift Router Lift
(1) 8-1/4'' x 11-3/4'' aluminum router plate
(1) Insert ring (1-1/2'' I.D.)
(1) Set of hex keys on key chain
More Information
Brand Bench Dog
Weight 94.9500
Tech Spec Top and Fence:
  • Table Top Dimensions: 32'' x 24'' x 1-1/2''
  • Top Material: Cast iron
  • Fence Dimensions: 3-1/2''H x 32''L
  • Fence Material: Aluminum and MDF
  • Plate Leveling: Yes; 12-point system

Pro Lift Router Lift:
  • Compatible Motor Diameter: 4.2'' (13.19'' circumference); e.g. Porter-Cable 7518
  • Compatible Motor Diameter with Optional Collar #50098: 3-1/4'' (10.21'' circumference) e.g. Bosch 1617
  • Compatible Motor Diameter with Optional Collar #57022: 3-1/2'' (11'' circumference) e.g. Makita RF1101
  • Plate Dimensions: 8-1/4'' x 11-3/4'' x 3/8'' thick
  • Insert Ring Inside Diameter: 1-1/2''
  • Vertical Travel: ~5-1/2'' (varies w/ installation)
  • Quick-Gear Adjustment Rate: 1 revolution = 1/2''
  • Precision Gear Adjustment Rate: 1 revolution = 1/8''
4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Nice equipment. Should be noted that you must grind off one of the leveling tabs to use the pro lift.
August 28, 2018
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question
Will this mount onto a delta 32-725 table saw?
Chris D on Jul 16, 2018
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov