Store Locator

Bench Dog No. 5 and 60-1/2 Hand Planes

Includes a No. 5 jack for flattening and squaring, plus a low-angle block plane for trimming end grain and edge grain.
Item #
68065
Current Price: $231.98 Kit Original Price: $299.99 Kit
In stock

Get Expert Advice

Return Policy

The versatile jack plane is typically the first bench plane to touch rough lumber. Its uses range from flattening and squaring to preliminary smoothing. It is often called a fore plane because it is used ''before'' the finer work of the jointer and smoothing planes. The block plane features an acute bedding angle and finely adjustable mouth opening—ideal for adjusting miters, joinery and fitting doors and drawers. The frog and base are a sturdy one-piece casting. Both planes have blades machined from thick 1/8'' steel for minimal chatter, and are precision ground for flatness. The fine grain castings are on par with many top-of-the-line planes. Each plane includes a case, sock and a Certificate of Inspection with measurements specific to your plane for sole flatness and blade hardness.

Features:

  • No. 5 jack plane is ideal for flattening, squaring and initial smoothing
  • Block plane is ideal for trimming and adjusting miters, joinery and fitting doors and drawers
  • Easy depth-of-cut adjustment and lateral blade adjustment
  • Solid brass cap iron and threaded fittings for smooth action
  • Ductile cast iron body for superior strength and resistance to impact
  • Sole of plane and back of blade are flat to tight tolerances
  • Blade and sole are treated with a protective layer of oil
  • Certificate of Inspection included for each tool
  • Minimal setup and tuning required before use

No. 5 Jack Plane
(1) Bench Dog® Tools No. 5 Jack Plane
(1) Plane sock
(1) Black storage case
(1) Certificate of Inspection
(1) Owner's manual

No. 60-1/2 Block Plane
(1) Bench Dog® Tools No. 60-1/2 Block Plane
(1) Plane sock
(1) Black storage case
(1) Certificate of Inspection
(1) Owner's manual

More Information
Brand Bench Dog
Weight 9.550000
Tech Spec

No. 5 Jack Plane:

  • Plane Model: No. 5 Jack Plane
  • Plane Weight: 5.95 pounds
  • Sole Flatness: 0.002'' to 0.004'' tolerance
  • Sole Length: 14''
  • Sole Width: 2-1/2''
  • Blade Width: 2''
  • Blade Thickness: About 1/8''
  • Blade Bevel Angle: 25°
  • Blade Bevel Up/Down: Down
  • Blade Hardness: 55-60 HRC
  • Frog/Blade Seat Angle: 45°
  • Tote and Knob Material: Sapele
  • Body Material: Cast iron
  • Blade Material: Hardened carbon steel
  • Lever Cap Material: Brass

No. 60-1/2 Block Plane:

  • Plane Model: No. 60-1/2 Block Plane
  • Plane Weight: 2.2 pounds
  • Sole Flatness: 0.002'' to 0.004'' tolerance
  • Sole Length: 6-1/4''
  • Sole Width: 1-5/8''
  • Blade Width: 1-3/8''
  • Blade Thickness: About 1/8''
  • Blade Bevel Angle: 25°
  • Blade Bevel Up/Down: Up
  • Blade Hardness: 55-60 HRC
  • Frog/Blade Seat Angle: 15°
  • Handle Material: Brass
  • Body Material: Cast iron
  • Blade Material: Hardened carbon steel
  • Lever Cap Material: Brass

Prop 65 Warning WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product
Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood