$599.00 Each
Additional Shipping Charge: $40
In stock
Articulating arm can crosscut stock up to 12'' wide, yet takes up far less space than typical gliding miter saws.

Bosch CM10GD 10'' Dual-Bevel Axial-Glide Miter Saw

Item #
53920
Rating:
94% of 100

Take a close look at the hinging mechanism that connects this miter saw to its base. That's the Axial-Glide linkage, and it isn't just for looks—when pulled, it extends with incredible smoothness to allow crosscuts up to 12'' wide, without the need for the typical glide bar that would otherwise force you to pull the saw away from the wall for clearance. This compact, more space-efficient design is excellent for smaller shops and tight working quarters, saving up to 10'' of working space. Slide it right up to the wall and cut to your heart's content—you can say goodbye to those dents in the drywall. In addition, it won't creep out of alignment or become sticky over time, as typical gliders sometimes do.


Features:
  • Axial-Glide™ System provides consistent precision over tool life and a compact footprint, saving up to 10'' of workspace over typical gliding miter saws
  • Expanded 12'' horizontal cutting capacity (nominal); 5-1/2'' vertical capacity against the fence (base); 6'' crown capacity against the fence (45° spring)
  • Bevel controls are located up front for quick, easy bevel settings without reaching behind the saw
  • Chop/crown lock secures head in place for maximum chop cutting capacity for upright base molding and nested crown molding
  • Tall sliding 4-1/4'' fences for easy bevel setups and increased crown and base molding capacity
  • Large, easy-to-read uniform bevel & stainless steel miter scales: 52° left/60° right miter capacity; 47° left/47° right bevel capacity with marked detents and roof pitch angles
  • Adjustable miter detents at 0°, 15°, 31.6°, 22.5°, 45°, 60° right super-accurate and durable design
  • Push-button miter detent override with easy-to-access thumb-actuated control for fine miter angle adjustment
  • Bevel detents at 0°, 33.9° and 45° left/right for accurate cuts
  • Category best 90% dust collection is optimized for cutting 2x material with a vacuum
  • Ambidextrous trigger with soft grip ergonomic handle provides comfort for all-day use
  • There is an additional $40.00 shipping charge for this item.
With the Rockler Protection Plan, you'll get accidental damage coverage immediately upon purchase of your tool. Plus, we will extend the manufacturer's warranty for your choice of an additional 1 or 2 years. We'll take care of all parts and labor for any repairs, with no deductibles and no hassles. If your tool can not be repaired, we'll gladly replace it. Available in the US only. Click here to learn more. Standard Manufacturer's Warranty: 12 months
(1) Bosch CM10GD 10'' Dual-Bevel Axial-Glide Miter Saw
(1) 10'' 60T Blade
More Information
Brand Bosch
Manufacturer Part Number CM10GD
Weight 78.0000
Tech Spec
  • Bevel Angle Range: 47° left and 47° right
  • Bevel Stops: 0°, 33.9°, 45° left and right
  • Cord Length: 6'
  • Height: 20-1/2''
  • Length: 32''
  • Miter Angle Range: 52° Left, 60° Right
  • Miter Detents: 0°, 15°, 22.5°, 31.6°, 45° (Left/Right)
  • Miter Positive Stops: 0°, 15°, 22.5,° 31.6°, 45° (Left/Right)
Technical Documents
Cord/Cordless Corded
Saw Blade Speed 4,800 RPM
Saw Blade Diameter 10"
Dust Collection Dust Bag
4.7 / 5.0
18 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
14
3
1
0
0
Great Miter Saw
Very Easy to use gets the job done we are building a house and is extremely helpful!
July 26, 2019
Woodworking Experience:
Intermediate
The best!
Best saw I’ve every used. Sooo smooth!
May 8, 2019
Purchased
5 months ago
Woodworking Experience:
Advanced
Square cuts, right out of the box
September 17, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Good Buy. Works quite well!
Good Buy. Works quite well!
August 17, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Chop saw
A revolutionarily simple pivot mechanism is so much better than the linear slide that has become the norm. Bosch breaks the mold on this one, and will change sliding chop saws forever. Great quality as well, with excellent simple up front miter adjustments.
May 9, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
An awesome miter saw!
Love this miter saw! The axial-glide feature made it easy for me to purchase. Cuts are precise and the versatility is on point! Would highly recommend this saw!
March 17, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
Love it. Can saw extra wide boards and cut dados.
January 15, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
The best miter saw on the market as far as I am cocerned.
I have been in construction for 36 years and this is the finest saw I have ever used 1) Acurate 2) Adjustable 3) Cross cuts stock up to 12” wide accurately 4) Stays square after set up 5) Cuts smooth as silk after fine adjusting.
January 11, 2018
Purchased
1 year ago
Woodworking Experience:
Advanced
Great tool!
Excellent so far. Easy to set up and use. Clean, smooth cuts. Very pleased
November 4, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Nice saw
Its beautiful machine and engineering. The out of the box setup was easy and was ready for cut after few adjustments. The glide feels super nice and comfortable.
August 18, 2017
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 13 answers
Why did you choose this?
Rockler Store
I like the fact that it doesn't have slides to clog. After several months, this is the best Compound Miter Saw I have ever used. Great Product!
The l on Aug 22, 2015
I like the fact that it doesn't have slides to clog. After several months, this is the best Compound Miter Saw I have ever used. Great Product!
The l on Aug 22, 2015
Bevel release lever is working to hard on newly set up saw what do I need to change?
A shopper on May 25, 2015
BEST ANSWER: Back off the nut you installed to attach the lever a quarter turn at a time until it feels right. I made the same mistake.
How deep is it? That is, how deep is it from front to rear? I'm tired of my space hog slider. Does it have a laser line for cut alignment?
jim G on Dec 25, 2018
BEST ANSWER: Not sure on exact depth, but I can slam my miter saw stand legs up against a wall and the saw doesn’t interfere. Super nice for small spaces, especially my 10X10 tent on rainy days. Doesn’t come with a laser, but you can get one aftermarket from Bosch. Ive been using mine for about a year now and love it, but the only negative is the weight. I move around a lot from site to site and set up/pack up is always kind of a bear. If you work longer jobs, or are using it for a shop specific tool, I say go for it. Hope this helps:)
What is the voltage?or type of plug.. Need 110v for uk site work
Daniel M on Aug 27, 2016
BEST ANSWER: It has a 3 prong plug and plenty of amps. I use a 60 tooth blade. It had a poor dust collection port off the blade. I expanded ti with a piece of rubber.
I read somewhere that this saw doesn't come with laser guides standard. That seems a bit farfetched given the price, but I'm having trouble confirming either way. Can anyone comment?
Richard J on Aug 27, 2015
BEST ANSWER: You read correctly. This saw does not come with a laser guide. the following laser is available as an option:
Miter Saw Laser Washer Guide LS010
It replaces the standard blade washer.
I was wondering if the Bosch CM10GD has a soft start???
Steve T on Jul 20, 2015
BEST ANSWER: It has a nice soft start and quickly picks up speed. The machine does not jolt when it starts and has a smooth quick acceleration to working speed.
For mounting purposes, what is the distance from the fence face to the wall behind the saw?
Robert D on Jun 15, 2018
BEST ANSWER: 20 inches
What is the width of the saw?
Jeff R on Nov 2, 2015
BEST ANSWER: Product Dimensions30.2 x 21.5 x 23 inches