Store Locator

Get Expert Advice

Return Policy

Cherry Turning Blank, 2'' x 2'' x 36''

Rich coloring and easy workability make cherry an excellent candidate for turning on the lathe—takes a nice finish and polish.
Item #

Cherry exhibits a pinkish, rosy tone when fresh off the lathe, but darkens over time to a deep, lustrous red. The narrow sapwood has a creamy color, similar to hard maple. Use these blanks full-length to make table legs, balusters and chair spindles, or cut them down to make tool handles, rolling pins and other smaller turnings. The blanks are rough sawn and may contain some sapwood. Dimensions are nominal.

(1) Cherry Turning Blank, 2'' x 2'' x 36''
More Information
Manufacturer Part Number CHY013.36
Weight 2.900000
Tech Spec
  • Species: Cherry
  • Width: 2''
  • Thickness: 2''
  • Length: 36''
Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to