D1 Replacement Cutter for Mini Carbide Turning Tool, Diamond
Narrow, angled tip cuts detailed beads and coves for spindle turnings.
Item #
47661
Our D1 solid carbide cutter has been sharpened on a diamond wheel to 1500-grit, and can be rotated to give you a fresh edge in just seconds. Use it with the corresponding Rockler Mini Ergonomic Carbide Turning Tool (#47459, sold separately). Once installed, it quickly creates sharp details and crisp lines in your spindle turnings.
Features:
- Provides a smooth finish in tight areas, such as the detailed beads and coves in spindle turnings
- Cutter rotates, giving you two fresh edges with no need for sharpening
- Sharpened on a diamond wheel to 1500 grit
- Solid carbide stays sharper for longer, when compared with steel
(1) D1 Replacement Cutter for Mini Carbide Turning Tool, Diamond
(1) Replacement Screw
| Brand | Rockler |
|---|---|
| Weight | 0.0300 |
| Tech Spec |
|
| Type | Replacement Cutter |
4.8 / 5.0
6 Reviews
Great Time Saver
Great time saver, cuts down on sharpening downtime and always provides a factory edge.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
New Life for Lathe Tools
When it starts tearing the wood, it's past time for a new cutter. This one made mine cut like new again.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
works verywell with my automated duplicator
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Diamond Replacement
I use the whole line of this type of turning tool so I have used R!, SR1 S1 and the D1. In the last year I have a large influx of people wanting my pens in Elk and Deer Horn and a few Buffalo ones. Well it has been 4 years since I purchased my original set of tools and this is the first time I have had to replace the D1 cutter. As always it is excellent and so far performs excellently like cutting melted butter, smooth.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions
Browse 2 questions
and 20 answers
Do you have a set of three carbide tip replacement for the mini carbide turning tools?
BEST ANSWER: At this time the Mini Carbide tool replacement cutters are sold separately.
- Reply
- Inaccurate
- Bill M Staff on May 13, 2020
WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.govWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
Related Products
-
Pen-Turning Ergonomic Carbide Turning Tools, 3-Piece SetSAVE $40 (26%) Special Price $109.99 $149.99
More Suggestions
