Double Edge Trimmer  Zoom

Double Edge Trimmer

Item #: 43208
$22.99
Each In Stock

Overview

Simply squeeze to cleanly trim both edges flush with plywood faces. Trimmer houses four blades that cut flush with the edges and four blades that cut at a 45° bevel angle that are held in a spring-loaded mechanism that you simply squeeze until flush with the edges of your material. Full closed design is ideal for trimming both edges of flexible edge banding such as wood veneer in one smooth operation.

Technical Details
  • Capacity for 9/16" to 1-1/4" range of thickness
  • High impact plastic body is 3-7/8" L X 1-7/8" H X 1-3/4" W
  • Trims veneer, polyester, and PVC

(1) Double Edge Trimmer

Tech Spec

Brand Rockler
Weight (lbs) 0.3100

What's included:


(1) Double Edge Trimmer

Technical Downloads:

Reviews

Customer Reviews

31 Review(s)

View All

I disagree with all of the...

Kurt A from Wenatchee, WA Posted November 30, 2008
I disagree with all of the negative reviews. This product works exceedingly well if you use common sense and just a tiny bit of practice. Those that said a pocket knife works just as good must be satisfied with a less than perfect trim job. This product yields a perfect edge for wood and vinyl trim.

I have had problems trimming both...

Dave P from Flint, MI Posted September 15, 2012
I have had problems trimming both edges of a board at the same time. I have found more success separating the cutter and using one half on one edge at a time. Perhaps the blades on one cutter are out of alignment. I would recommend adding an arrow to the top of the cutter to show the direction of cut. There are arrows but they are on the side and molded into the plastic. It would be better to have them marked in a contrasting lighter color. After the current project is finished, I will be shopping for a better version of this device if I ever need it.

The first thing to do is...

John M from St. Louis, MO Posted January 1, 2009
The first thing to do is back out the bevel cutters. They aren't factory adjusted and will tear out the banding and plywood edge if used out of the box. The first time I used the trimmer it damaged my project. Not a happy experience! I found the recommendation to back out the bevel cutters on a website blog. My next use gave much better results. It's lightly made even for a Taiwan [made]item. I routinely use a small router with a chamfering bit and have had very good results. This trimmer will come in handy when I don't want to take a router along to a project site. A light sanding gave a nice edge to the birch iron-on edging.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Videos

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012

What People are Saying:

I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere."

- Orval - 08/07/2012
Feedback X