$39.99 Pair
In stock
These handy clamps hold drawer fronts firmly in position on the drawer box while you drive the screws.

Drawer Front Installation Clamps

Item #
54804
Rating:
88% of 100
Drawer Front Installation Clamps Drawer Front Installation Clamps Drawer Front Installation Clamps Drawer Front Installation Clamps Drawer Front Installation Clamps Rockler Drawer Front Installation Clamps DIY Entryway Table
Drawer Front Installation Clamps

Securing drawer fronts to their drawer boxes can be a challenge, but it's a challenge these clamps are more than up for. With their dual clamp heads and micro-adjustable stops, the Rockler Drawer Front Installation Clamps make getting perfect alignment a cinch. The thin frame profile allows you to close the drawer while the clamp is still on, making it easy to check your alignment with adjoining drawer faces. Once the micro-adjusters are set, you can work your way through a stack of drawers in no time flat. Simply clamp the front in position and use our Drawer Front Adjustment Screws (#34734, sold separately) to fasten it in place. Sold in left/right pairs. Only light clamping pressure is necessary.

(1) Right-Side Rockler Drawer Front Installation Clamp
(1) Left-Side Rockler Drawer Front Installation Clamp
More Information
Brand Rockler
Weight 1.3000
Tech Spec
  • Max Drawer Side Thickness: 1-1/8''
  • Max Drawer Front Thickness: 1''
  • Max Side Overlay: 1-3/4''
  • Material: Steel and Plastic
  • Required Clearance between Drawer Box and Cabinet Frame: 3/16''
  • Required Clearance between Top of Drawer Box and Top of Slide: 3/4''
Technical Documents
  • Drawer Front Installation Clamp Instructions
  • Prop 65 Warning WARNING Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product
    4.4 / 5.0
    228 Reviews
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Star
    158
    33
    19
    9
    9
    A gift for my husband
    My husband wanted them for his birthday. He thinks they are great.
    March 16, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Advanced
    Great time saver
    Great product. Makes drawer front assembly quick and easy
    User submitted image
    Added Mar 16, 2019
    March 16, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Advanced
    Better than the OEM
    Used this slide to replace a broken OEM slide in a chest of drawers. It was an easy installation and offers a much smoother operation than the original.
    March 10, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Intermediate
    very good clamps
    March 8, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Advanced
    Wow.. hope whoever came up with this idea got a raise!
    Super idea; quick and easy to do 3 drawers with no guesswork or "3rd" set of hands to help hold the 'fronts' during installation. Really, ... for the price and convenience... a no brainer!
    March 7, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Intermediate
    GREAT
    Used them once so far. They work perfectly!
    March 7, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Intermediate
    easy to use and big help when installing front drawer
    March 6, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Intermediate
    Great idea and workmanship
    Clamps were easy to use and adjusted well for different drawer styles .
    March 4, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Advanced
    Drawer front clamps
    Excellent product!! Finally got around to using these yesterday. Absolutely the best way to attach drawer fronts. Very easy to set up and adjust the front side to side.
    No more guesswork or eyeballing. Clamp’em and screw’em.
    March 3, 2019
    Purchased
    1 month ago
    Woodworking Experience:
    Advanced
    Most excellent
    These are the most amazing set-up jigs I own. It's never been easier to install drawer fronts.
    March 2, 2019
    Purchased
    1 year ago
    Woodworking Experience:
    Intermediate
    Start typing your question and we'll check if it was already asked and answered. Learn More
    Browse 4 questions Browse 4 questions and 57 answers
    Why did you choose this?
    Rockler Store
    8 drawer fronts to install, well worth the cost!
    CARLA B on Mar 15, 2019
    Was trying to get the everyday free shipping, but the everyday free shipping is not evidently everyday.
    Scott H on Mar 7, 2019
    8 drawer fronts to install, well worth the cost!
    CARLA B on Mar 15, 2019
    Was not born with 4 hands.
    kathy k on Mar 11, 2019
    Was trying to get the everyday free shipping, but the everyday free shipping is not evidently everyday.
    Scott H on Mar 7, 2019
    Basically my helper when building drawers. Hands free is great.
    Christopher F on Mar 1, 2019
    We need more.
    Martin S on Feb 27, 2019
    needed to put a bunch of draw fronts on so furniture
    HARRY L JOHNSON J on Feb 24, 2019
    I needed this for building cabinets
    Robert I on Feb 24, 2019
    cause I wanted them
    Frank on Feb 22, 2019
    I have been nailing front on to open drawer then screwing from inside.this will work much better without nail holes to fill.
    ronald r on Feb 22, 2019
    I’ve built many projects with drawers and had trouble getting the drawer fronts lined up properly I think this will help
    ANTHONY on Feb 21, 2019
    refacing my cabinets
    meladi m on Feb 20, 2019
    I need these clamps to complete a project
    Ronald M on Feb 20, 2019
    I have a lot of drawers to make and this will make mounting the face a lot easier
    Shane B on Feb 19, 2019
    Increase production.
    Jon H on Feb 19, 2019
    I recently put drawer fronts on with many problems, and could have used these to make the job go much faster and more accurately. I"ll look forward to using these tools next time!
    Roy H on Feb 18, 2019
    Hoping it is easier than double face tape.
    Boomer on Feb 18, 2019
    Solves many problems mounting drawer fronts
    Ed J on Feb 17, 2019
    This tool has to be easier and more accurate than trying to hold a drawer front in place while using conventionally styled clamps.
    Gregory S on Feb 17, 2019
    To add the face plates to my new shop cabinet drawers and some other projects.
    Michael S on Feb 17, 2019
    Will make positioning drawer front easier.
    Dirk S on Feb 17, 2019
    I have older drawers and I am planning on refinishing them - these clamps are going to be very useful
    edyta . on Feb 17, 2019
    I’m building a kitchen and it will make drawer front installation much faster
    Ryan W on Feb 17, 2019
    to simplify installation of drawer fronts
    Thomas B on Feb 16, 2019
    Making several drawers, thought these would help with installation.
    Gerald D on Feb 14, 2019
    ease of installation
    Mike W on Feb 13, 2019
    Need easier way to align drawer fronts I build a lot of cabinets with drawers
    Mark L on Feb 13, 2019
    I do lot of drawer fronts this should help install better
    mark n on Feb 11, 2019
    Make a lot of cabinets and wanted to see if this would make mounting drawer faces easier.
    Bob C on Feb 11, 2019
    for mounting drawer fronts
    John J on Feb 11, 2019
    Convenience
    Martin H on Feb 10, 2019
    easier installation of drawer fronts
    Gary C on Feb 10, 2019
    time saver
    Davida W on Feb 10, 2019
    I have future plans for it
    John C on Feb 10, 2019
    I am going to resurface my kitchen cabinets and this looks like an easy way to align the fronts.
    Mike A on Feb 10, 2019
    Because I don’t have 3 hands and sometimes double side tape doesn’t hold. I hope these clamps will work for me.
    Tim T on Feb 10, 2019
    help with centering face fronts.
    Louis G on Feb 10, 2019
    Installing drawer fronts on a kitchen
    teodor t on Feb 9, 2019
    Third hand
    Michael M on Feb 9, 2019
    making things easier is always what I am looking for
    Ken R on Feb 9, 2019
    Ease of drawer front installation
    Dennis C on Feb 8, 2019
    should make install easy
    James W on Feb 7, 2019
    Email recommendation
    Chris C on Feb 6, 2019
    Several people recommended these clamps in a cabinate makers/installers Facebook group. They look to be a good option
    Marcus Q on Feb 5, 2019
    takes the pain out of guess work
    sylvan fisher Y on Feb 4, 2019
    Remodeling my kitchen and will have many drawer faces to attach.
    James M on Feb 3, 2019
    Easily attach the top drawer face in a chest of drawers
    Paul P on Feb 3, 2019
    I have built many drawers for cabinets had to use odd clamp set ups these looked like a real time saver in attaching drawer fronts
    STEVEN M on Feb 3, 2019
    Draw front
    Robert C on Feb 3, 2019
    Building shop cabinets. Makes installing the fronts easier.
    Phil B on Feb 3, 2019
    I’ve been using the drawer pulls, lightly tightened, to hold and adjust the drawer fronts. This job I’m doing now they have not picked out the hardware and i would like to have everything installed before .
    Mike H on Feb 2, 2019
    Was not born with 4 hands.
    kathy k on Mar 11, 2019
    Basically my helper when building drawers. Hands free is great.
    Christopher F on Mar 1, 2019
    Can these clamps be used for inset drawers?
    Robert S on Jan 10, 2016
    BEST ANSWER: Yes, they can be used, the drawer will not close all the way, but you can see and adjust your alignment, then using washer head drawer front screws and enlarged holes, you can adjust drawer front as needed.
    Can these clamps be used with Euro metal drawers like Grass Zargen or Blum Metabox?
    Jim G on Feb 5, 2016
    BEST ANSWER: Absolutely....
    What screws come with it?
    gerald m on May 27, 2018
    BEST ANSWER: It comes just as the picture shows. You don't screw it to the drawer, you place the clamps on top of the left and right drawer side, clamp it to the drawer. Then put your drawer front in and lightly clamp it. Then use the side to side adjusters to move the drawer front to where you want it to be,tighten the clamps on the drawer front and i always put 1 or 2 extra clamps on just to make sure it doesn't move when I screw the drawer box to the front. These are GREAT to use, it really helps alot.