Store Locator
QTY

Get Expert Advice

Return Policy

Drawer Front Installation Clamps

These handy clamps hold drawer fronts firmly in position on the drawer box while you drive the screws.
Item #
54804
Rating:
88% of 100

Securing drawer fronts to their drawer boxes can be a challenge, but it's a challenge these clamps are more than up for. With their dual clamp heads and micro-adjustable stops, the Rockler Drawer Front Installation Clamps make getting perfect alignment a cinch. The thin frame profile allows you to close the drawer while the clamp is still on, making it easy to check your alignment with adjoining drawer faces. Once the micro-adjusters are set, you can work your way through a stack of drawers in no time flat. Simply clamp the front in position and use our Drawer Front Adjustment Screws (#34734, sold separately) to fasten it in place. Sold in left/right pairs. Only light clamping pressure is necessary.

(1) Right-Side Rockler Drawer Front Installation Clamp
(1) Left-Side Rockler Drawer Front Installation Clamp
More Information
Brand Rockler
Weight 1.3000
Tech Spec
  • Max Drawer Side Thickness: 1-1/8''
  • Max Drawer Front Thickness: 1''
  • Max Side Overlay: 1-3/4''
  • Material: Steel and Plastic
  • Required Clearance between Drawer Box and Cabinet Frame: 3/16''
  • Required Clearance between Top of Drawer Box and Top of Slide: 3/4''
4.4 / 5.0
271 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
189
39
22
11
10
Best invention
Best invention in a long time. Greatly reduced time to install drawer fronts.
October 22, 2019
Purchased
1 month ago
Woodworking Experience:
Advanced
Love them
These are a real timesaver and work very effectively.
October 6, 2019
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Must Have!
These work great, they hold the drawer front on securely to make fastening the front on a simple process. Easy to micro adjust left and right and for different overlay sizes. Highly recommend this product from beginners to advanced woodworkers.
September 21, 2019
Purchased
2 months ago
Woodworking Experience:
Advanced
Drawers
Works great!! Installed a drawer front yesterday, they made it so easy! Can’t wait to do the next two fronts.
September 14, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Drawer clamps
I was really happy the way they worked made my job easy and less time measuring
September 13, 2019
Purchased
8 months ago
Woodworking Experience:
Intermediate
The clamps worked as described by Rockler. t
They held the drawer face in place until secured with screws from inside. Made the alignment much easier.
September 5, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Rockier Rocks
Yes I would recommend this product, it’s a must have.
It’s like having two sets of hands.
Time Saver
Another helping hand
September 1, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Drawer front clamps
These are an excellent product for installing and aligning drawer fronts. No other method works as well.
August 31, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Highly recommend this product. Working alone made easy.
August 23, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Great alignment tool
I was able to easily dial in the spacing down to 1/8" all around then pull out the drawing and screw in the front. You just need a spacer (dime or nickel) to run around the perimeter and adjust the positioning accordingly. Just wish I hadn't bought them a week before they went on sale :)
August 20, 2019
Purchased
3 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 58 answers
Why did you choose this?
Rockler Store
Speed up the installation process with better accuracy
Robert S on Nov 5, 2019
Very convenient.
Luis Miguel G on Oct 27, 2019
Speed up the installation process with better accuracy
Robert S on Nov 5, 2019
Multiple projects need tool to help.
Ali S on Nov 3, 2019
Very convenient.
Luis Miguel G on Oct 27, 2019
I am building a new kitchen and I want to be as precise as I can be. I want all the best tools to do the best job I can.
JJ on Oct 16, 2019
Have a pair already a works very well putting drawer fronts on
mark n on Oct 5, 2019
To make it easier to line up drawer fronts
Justin R on Oct 4, 2019
From what I read it's the best.
Rob on Sep 17, 2019
Actually used it today, worked great.
David K on Sep 9, 2019
because aligning drawer fronts can be a pain, thought this would make it simpler.
Cecile R on Aug 28, 2019
Gift for a friend embarking on a major upgrade to his workshop. Drawers are next.
Linda V on Aug 18, 2019
Building some drawers
George B on Aug 14, 2019
Making night stands and this is the first time making something with drawers. If I don’t get these things it will be the last time I make something with drawers. Haha. But seriously!
Scott R on Aug 11, 2019
I am building cabinets and have several drawer banks and combination cabinets. I often build bedroom furniture and presently use vise grips with the oatmeal pads on the contact pads of the clamps. I hope this will be faster and accurate
Charles L on Aug 7, 2019
Using these to install drawer on new cabinets and vanity that will be building
Duston on Aug 4, 2019
A must when building drawers
Armando H on Aug 2, 2019
To make adding drawer fronts a lot easier
D A on Aug 2, 2019
Makes it so much more accurate and easier to install draw fronts on what I will be making.
Richard G on Jul 24, 2019
always a little awkward stabilizing drawer fronts where you want them for mounting, looked like a good way to approach it
nathan m on Jul 16, 2019
It really serves as a third-helping hand to assist you in creating accurate projects and satisfaction.
Robert G on Jul 16, 2019
To assist in placing drawer fronts
Michael B on Jul 8, 2019
Looks like the best way to fit drawer fronts.
Skeeter on Jul 5, 2019
looks like a welcome tool for drawer construction
Alan S on Jul 3, 2019
Ease if drawer front installation, upon recommendation of a friend
Tommy on Jul 3, 2019
To save time and have good results
John J on Jun 26, 2019
For better centering
Charles P H on May 29, 2019
Building a vanity
Patrick B on May 27, 2019
For a cabinet project
Mark V on May 27, 2019
previous quality of items purchased from Rockler<br />needed for cabinet business
Charlie M on May 27, 2019
good price and a quality product
Ron S on May 26, 2019
Installing drawer fronts
Stephen W on May 24, 2019
Other Rockler jigs have been great!
Seth I on May 22, 2019
Makes my assembly time easier and faster.
Paul P on May 13, 2019
Ease installation.
Gerald H on May 13, 2019
Hoping the will help with my drawers
DANIEL M on May 12, 2019
Because there are handy
Ramiro C on May 12, 2019
Building a number of cabinets
Soeren H on May 12, 2019
it will help keep front of draw level
Ray M on May 8, 2019
needed an easy way to hold drawer fronts while securing them to drawers
Smokin on May 7, 2019
Need to finish the drawer front for the cabinets I made.
George Z on Apr 30, 2019
needed for my project to make life easier and being on sale helped <br />have a number of jigs and clamps from rockler and they work like advertised
john W on Apr 29, 2019
Getting ready to do a bunch of drawers.
Dik H on Apr 29, 2019
I already have a set and they save time , money, body fatigue, while preventing damage to the product.
eric l on Apr 29, 2019
I have struggled with attaching drawer fronts for years. After reading the reviews, these seem like a no brainer
Silvio P on Apr 14, 2019
drawer builds
Jim W on Apr 13, 2019
I always struggle with getting everything level and think these will solve that problem
Brian A on Apr 12, 2019
Customer comments and the appearance of a practical way to mount drawer fronts!
Dave F on Apr 10, 2019
Going to need these in the near future making several draws. Will be helpful!
ANNETTE R on Apr 8, 2019
I have plans to build desks and shop furniture with a lot of drawers in the near future, so the sales price made it a good time to buy. However, the more ease of installation you can create in your projects, the faster you can complete them.
Wes on Apr 8, 2019
Should make installation of multiple draw fronts easier
H B P on Apr 7, 2019
It is always a pain to align draw fronts properly, thought this would help
Bill K on Apr 7, 2019
Multiple projects need tool to help.
Ali S on Nov 3, 2019
I am building a new kitchen and I want to be as precise as I can be. I want all the best tools to do the best job I can.
JJ on Oct 16, 2019
Can these clamps be used for inset drawers?
Robert S on Jan 10, 2016
BEST ANSWER: They are not designed for inset doors, but are useful if you build an auxiliary spacer jig to use in conjunction with the clamps
Can these clamps be used with Euro metal drawers like Grass Zargen or Blum Metabox?
Jim G on Feb 5, 2016
BEST ANSWER: These jigs can be clamped to the metal sides no problem
What screws come with it?
gerald m on May 27, 2018
BEST ANSWER: It comes just as the picture shows. You don't screw it to the drawer, you place the clamps on top of the left and right drawer side, clamp it to the drawer. Then put your drawer front in and lightly clamp it. Then use the side to side adjusters to move the drawer front to where you want it to be,tighten the clamps on the drawer front and i always put 1 or 2 extra clamps on just to make sure it doesn't move when I screw the drawer box to the front. These are GREAT to use, it really helps alot.
Prop 65 Warning WARNING Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product
More Suggestions