Drawer Slide/Hardware Kits for Pullout Shelf Kit
Sufficient components are included in the kit to make two rolling shelves (if both are cut to 15" wide or less) when used with the Birch Pullout Shelf Kits (sold separately). The 22" Kit with the 22" Birch Pullout Kit (#29847). The kit includes one pair of standard guides,two side panels, a bag of screws and two spacers.
|Organization Style||Base Cabinet Organizers, Base Cabinet Pullouts|
over 2 years ago
Short rail with dovetail grooves is front.
Tall rail with dovetail grooves is back.
Two matches rails with dovetails are the right and left sides.
The slides are stamped with:
DR, this goes on right side of drawer
DL, left side of drawer
CR attaches inside cabinet right side
and CL inside cabinet left side.
After cutting the pieces to the correct width for your cabinet you can either attach the cabinet slides to the front of the cabinet and use the plastic brackets to attach the slides to the back of the cabinet. Or I cut a strip of wood and attached it down the inside of the cabinet then attached the cabinet rails to this.
I hope this helps. I would have sent pictures but I am not able to figure out how to do this.