$89.99 Each
In stock
Our Dust Bucket neatly contains all dust and debris that falls below your router table. With the appropriate attachments, it can collect dust from above the table as well.

Rockler Dust Bucket Dust Collection for Router Tables

Item #
32321
Rating:
94% of 100

The Router Table Dust Bucket will capture nearly all routing debris when you use both bucket and fence attachments with the Router Table Dual Port (#20225, sold separately) and your 4" dust collection system. 4" port can be mounted on the back or either side for convenient access. Enjoy maximum dust collection while blind routing dadoes, dovetails and more. Features an easy-access door with magnetic catch for quick height adjustments and an adjustable vent for suction control to prevent boards from sticking. Bucket is easy to assemble and is keyhole slotted to attach to most router table tops. Galvanized steel components. Fits most routers, including large plunge routers.

  • Use only with a 4" dust collection system.
  • The Dust Bucket will not work with a shop vacuum.

(1) Bottom
(1) Side with port opening
(1) Side
(1) Front Assembly (Front Panel, Door, Hinge and Magnet)
(1) Back
(1) Vent Assembly
(1) 4'' Dust Port
(28) #8-3/8'' Screws
(1) Cord Grommet

More Information
Brand Rockler
Weight 13.3500
Tech Spec
  • Depth: 10" D
Technical Documents
Height 13" H
Width 13" W
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.7 / 5.0
65 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
49
12
2
1
1
Dust Bucket installation problem
Now that I have the dust bucket attached neatly under my router table, all router dust and chips are being collected very well. I did have a significant problem mounting the screws (not included with the product) in the bottom of my router table. My Rockler table is phenolic which does not accept screws well; I broke off one head off trying to screw into the phenolic which acts anything like any material I have dealt with before. I'd like Rockler to suggest a fastener type (or better yet, include the correct fasteners with the bin) that will work with their table or an alternate process for attachment. Otherwise, very happy with the product.
July 21, 2019
Purchased
2 months ago
Woodworking Experience:
Intermediate
Dust bucket
Thanks to your staff in St Louis store I bought the bucket and it really works , the dust and wood particals go straight into my dust collector.
June 19, 2019
Purchased
11 months ago
Woodworking Experience:
Intermediate
Should have purchased this years ago/ much improved dust collection
This is much better than the homemade frommolywood. Dust collection is improved and router runs cooler
May 29, 2019
Purchased
4 months ago
Woodworking Experience:
Intermediate
Was easy to put together, I modified mine for the sawstop router table.
May 4, 2019
Purchased
6 months ago
Woodworking Experience:
Advanced
It works with 2-1/2...
It took a mdf adapter to fit it to a Bench Dog saw extension and cut 1-1/2" from the height to get it to fit in my saw base. Modified the output for 2-1/2 inch hose so I could connect it to a cyclone/shop vac system. Works like a charm. I figure it could do better with a 4 inch system, but for what I got, it works fine keeping everything clean. Which is exactly what my goal is.
May 2, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Excellent.
Easy to assemble, lots of configurations options, a great value and easy addition to the router table. The dust collection is top notch as well.
User submitted image
Added Apr 25, 2019
April 25, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Works as expected
A bit of a heada he to assemble, but once together it works well. A bit of creative installation got it installed under my Kreg benchtop table. I suggest opening the holes a bit.
User submitted image
Added Mar 3, 2019
March 3, 2019
Purchased
6 months ago
Woodworking Experience:
Intermediate
Good Product
The Dust Bucket works very well - leaving very little dust on the surface of the router table (when combined with the fence dust collection)
February 19, 2019
Purchased
8 months ago
Woodworking Experience:
Beginner
another must but a couple of easy fix probs
only thing I did not like was the edges of the door where sharp 5 min fix was to just file the edges down
February 12, 2019
Purchased
7 months ago
Woodworking Experience:
Intermediate
Perfect
if I had anything to complain about it would be that it was a tad too easy to install backwards. But I was admittedly tired when I did it.
February 11, 2019
Purchased
11 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 20 questions Browse 20 questions and 39 answers
Why did you choose this?
Rockler Store
This item seems to function the same as the one made by Incra, but for approximately half the price.
Carroll on Jul 5, 2019
Setting up new shop<br />Very satisfied with products Rockler carries.<br />Rockler stands behind there products and takes care of there customers. Great customer service.
Bruce K on Dec 1, 2018
This item seems to function the same as the one made by Incra, but for approximately half the price.
Carroll on Jul 5, 2019
Christmas gift
Dr. Mary K on Dec 6, 2018
Setting up new shop<br />Very satisfied with products Rockler carries.<br />Rockler stands behind there products and takes care of there customers. Great customer service.
Bruce K on Dec 1, 2018
I saw it on a friends KREG router table, and liked the quality, so i ordered it for my new table
Eric H on Nov 14, 2018
Cleaner Shop Space
DIANA G on Jun 4, 2018
Gift for son-in-law at his suggestion on his wish list.
Shirley L on Dec 10, 2017
Same as above and to control dust.
Bill G on Nov 24, 2017
Woodpecker router table needs an under table dust collection
Mark K on Jun 2, 2017
I HAVE ONE ALREQDY. LOVE IT. NEEDED A SECOND ONE TO REPLACE AN OLDER STYLE WITH BOTTOM DISCHARGE HOLE AND ACCESS DOOR THAT NEVER STAYED CLOSED. THIS UNIT IS SUPER. LIKE KEYHOLES FOR QUICKER REMOVAL AS YOU CAN LEAVE SCREWS IN UNDERSIDE OF TABLE.
Paul R on Apr 22, 2017
Well designed and well made solution for dust collection below router table.
William K on Feb 28, 2017
Wanted to build a nice router table with great dust collection.
Leo T on Jan 14, 2017
To help contain dust for my collection system.
James P on Dec 22, 2016
Looking for a way to minimize the dust from my router table - this thing works great!!!
K9CHUCK on Nov 28, 2016
dust control
Richard W on Sep 19, 2016
It is an effective way to collect shavings and dust from my router table. I was pleased with how well this works.
John B on Sep 5, 2016
I wanted to collect the dust from my router table &<br />I liked all the other Dust Right system products.
P P on Jun 23, 2016
I wanted to keep the sawdust from the router from blowing all over the shop and this box does the trick. Works as advertised.
Kevin M on May 1, 2016
Works great for keeping dust down in the shop
James A on Jan 4, 2016
Again, excellent.
smoker54 on Dec 31, 2015
Decided it was easier to buy one instead of making one.
Barry W on Dec 5, 2015
This has been, hands down, one of the best purchases I have ever made. Cuts down dust to almost nothing and works great.
Thomas P on Nov 9, 2015
This works great. Easy to assemble.
panheadlarry on Oct 28, 2015
Beets making my own plenum chamber!!
Colin S on Sep 4, 2015
I hope it helps with sawdust control
Joseph E on Aug 14, 2015
Improve dust collection for router tabe
Gary N on Aug 2, 2015
Tired of cleaning up under my router. This box delivers great dust control and solves my housekeeping problems. A bit expensive, but it does the job.
FRANK U on Jul 17, 2015
Same as above
Bob A on Jun 26, 2015
DUST CONTROL
Blaine L on Jun 4, 2015
Using dual port I can minimize protusion from the side of the router table when the dust collection hose is not connected.
Michael F on May 11, 2015
For my router table I built
Norman M on Apr 24, 2015
Christmas gift
Dr. Mary K on Dec 6, 2018
I saw it on a friends KREG router table, and liked the quality, so i ordered it for my new table
Eric H on Nov 14, 2018
Will this fit the new Rockler pro lift router lift with a larger router?
THERESA L on Mar 14, 2018
Has anybody mounted this to a cast iron bench dog table? Did it work?
Ziya D on Mar 9, 2016
BEST ANSWER: My bench dog cast iron router table has 4 pre-drilled 1/4 inch holes one in each corner underneath , the front 2 holes are for the accessory hooks that come with the table to hold things like the router wrench. I cut a 3/4 piece of Birch plywood to size, in my case it measured 13 x 21.5. I drilled holes in the plywood for 1/4 inch diameter / 20 (thread count ) hardened steel bolts, the regular bolts I started with snapped off in the table hole and I had to drill it out and re-tap the hole, so I highly recommend hardened steel bolts and don't over torque them, the front 2 bolts have to be shorter than the 2 rear bolts so I cut them shorter with a hack saw. I used a flat washer and a lock washer to prevent the bolts from vibrating loose during operation. I then used a flat carpenter pencil to trace the outline of the router table hole from the top side onto the plywood, I then removed the plywood and used a multi-purpose saw which cuts square holes and followed the lines and made a perfect hole, (a jig saw will work too) matching the cast iron hole for the router to fit into. I re-mounted the plywood with the 4 bolts and washers and attached the dust bucket. I use a big 3 & 1/4 HP Porter Cable router and it fits in the dust bucket with room to spare, everything fits perfectly and this system catches 100 % of the dust if you use the router fence attachment hose set up, also sold here at Rockler, I am extremely happy with this product, I have purchased many products from Rockler over the last 12 years but this one is the best and beats the dust bucket I built myself hands down. Just remember you have to have a 4 inch hose dust collection system for this to work well.
What are the dimensions? The spec says 13 (height)x13(width)x10 (depth). The manual makes it look like front to back is 10". How tall can the router be?
jojo4 on Nov 26, 2017
BEST ANSWER: Don’t know about the dimension but the system works great
i just recently purchased the BOSCH RA 1171 router table, will this work with that, and i have a 4" international dust collector will be work?
Anthony R on May 19, 2017
BEST ANSWER: You should have no problem with installing this on your table as well as your vacuum system Enter an answer to this question.
I have Rockler high pressure laminate table top. What screws do you recommend to attach the dust bucket?
Mary R on Mar 26, 2016
BEST ANSWER: Drill small pilot holes for 4 #6x3/4 inch wood screws! Use washers if needed to prevent going through the holes of the bucket!
The description states that a shop vacuum cannot be used with the dust bucket. Why?
Roger B on May 29, 2015
BEST ANSWER: The dust bucket has a 4 inch dust port and requires more air flow than a shop vac can provide in order to clear shavings from both above and below the router bit. I use it with a 4 inch hose line on my dust collector and it captures the majoriry of the shavings nicely.
I have ordered a JessEm Mast-R-Top phenolic top and a Mast-R-Lift II. Will this work these items?
Robert H on May 20, 2015
BEST ANSWER: I have a Woodpecker phenolic top and a Woodpecker lift. The Dust Bucket fits over the router and lift, but you will probably have to modify how you attach it to your table as I also will have to do.
Will this fit onto Kreg Benchtop Router Table?
PETER R on Sep 10, 2018
BEST ANSWER: I dont see why not the screws that come with it are self tapping the best way to install is putting a blanket or tarp down n turn ur table upside down to install screws
Any issues with overheating? Also, can the dust being sucked into the motor due to the confined space cause damage?
Chris on Dec 9, 2016
BEST ANSWER: while I am no expert on the effect sawdust can have on an electric motor , I have not experienced overheating plus the air from the fan in most routers exit through bottom of the router or in this case the area closest to where the dust drops in . so if your dust collector is on I think very little dust goes into the router in first place
Can you mount the big Triton 3 1/2 horse router in this dust collector box?
Tom on Jul 13, 2019
BEST ANSWER: I'm not sure about the Triton router, but I mounted the big porter cable router and still have a ton of room, so I'm betting that it would accommodate the Triton as well
The larger Craftsman shop vacuums use a 4" vacuum hose. Will they work with the dust bucket?
Bradford T on Jul 5, 2019
BEST ANSWER: With the proper adapter, that can be bought at Rockler, yes it will work
How do you run the router power feed through the box?
Dick S on Jan 14, 2019
BEST ANSWER: There is a nice fitting in the back that securely allows your cord to exit. The plastic fitting has two parts which go together and come apart easily. No issues with this unit once you install it.

I route a lot and it gets the majority of chips with little cleanup. Compared to without the unit, there is a vast improvement.
has anyone installed this with a Ready2Lift or Readt2Rout complete system? i'm wondring if that lift is too deep?
Sarge on Jun 24, 2017
BEST ANSWER: I have a 3 1/4 hp auto lift router and it's not a problem box is deep enough and my router is long so I would be surprised if ur router wouldn't work with this box
Will this work on a Kreg Router table and porter cable 7518 router?
dvmcare on May 26, 2017
BEST ANSWER: It should if your table is wood or composit and you can screw it to the table. I have the tickler table and a Milwaukee router. All fits in the box.
What is the measurement between the top of the dust bucket door and the top of the dust bucket? The pictures suggest that it is less than 4 inches. Thanks.
David C on Apr 30, 2018
BEST ANSWER: Mine is 2 5/8"
Would this dust collector work to just catch dust from below (no suction, only periodically empty manually), while using a shop vac only on the Rockler fence dust port? I don’t have a dust collections system, just a 2.5” shop vac.
Ryan W on Jan 29, 2018
BEST ANSWER: Ryan, Iwould at least reduce 4"to 21/2 and put a y on your shop vac . The listing on rockler says it won't work with shop vac. Either way air flow around the router keeps it cool and get rid of dust that falls in your router.
I have a dust colleter .
Will the bucket interfere with the blade-tilt adjustment wheel on a right tilt Unisaw with a Bench Dog leaf attached on the left side of the table?
glagen on Jan 15, 2018
BEST ANSWER: This dust bucket works fantastic for a ROUTER TABLE. It is not for a table saw. No, it would not work with a table saw but is a great investment for use with a router table.
Would it be possible to replace the dust port with 5" dust port and what it the height of the space between the front door and top of the frame? Thank you
Lennysgrossman L on May 8, 2016
BEST ANSWER: I'm not home at this time, but my recollection on the distance on the door and frame top is probably 2-3 inches.
check online with Rockler and other companies that might have a 5" to 4" adapter.
Has anyone attached this to a Jessem with the Mast-R-Lift? If so, could you provide some directions/photos? Thanks!
Shawn on Jun 2, 2019
Does the 13" width include the strips for screwing to the underside of the table?
John B on Sep 22, 2017