Freud® Three Wing Slot Cutters
Ideal for producing slots and grooves for T-moldings, spline joints, tongue-and-groove-joints and many other applications.
Item #
GRP18730
Should be used with Freud's slot cutter arbors 60-100 for 1/4" shanks (48361, sold separately) and 60-102 for 1/2" shanks (48814, sold separately). Compatible with 62-108 bearing. Cutter 56-109 can be used for biscuit joining. Cuts all composite materials, plywoods, hardwoods and softwoods. Use on handheld and table-mounted portable routers.
(1) Freud® Three Wing Slotting Cutter Bit
| Brand | Freud |
|---|---|
| Weight | 0.2500 |
5.0 / 5.0
6 Reviews
Easy and Fast
I used this to cut grooves in my drawer box sides to allow for the bottom to be fitted. This worked great and was fast and easy to use. Setup was easier than a dado blade.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Great product
Worked great to join straight edge composite decking to grooved composite decking making a picture framed hidden fastener deck.
Picture framed hidden fastener deck.
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Does a great job
well made easy to use
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
Like butter!
Great blade. I've never had a Freud blade or bit that I didn't like and this one didn't disappoint. Seriously cuts like butter. I use it to install T-molding on melamine and it's wonderful.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Excellent product
I needed these cutters to form a slot in a curved oak component of a stained glass project. The slot will hold the finished glass panels. I mounted the cutters in my table router, and they worked like a dream. Perfect solution.
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
September 14, 2014
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions
Browse 6 questions
and 5 answers
Why did you choose this?
Rockler Store
Do any slot cutters come in smaller diameters than 2"?
What is the deepest groove that can be cut with the 2" D x 1/4" H x Shank Freud #56-112 Three Wing Slot Cutters Bit Item # 35660?
BEST ANSWER: I would say measure the distance between the cutting edge of the cutter and arbor and subtract 1/16 inch.
Your routers collet, depending on where the cut is made, may have a greater impact on depth and that should be the measured point.
Setting up a cut accurately takes much more time than the actual work. Investing that time in an accurate and clean result is well worth the effort even if one has to do it over.
Quality work is something one can be proud of for many years.
Your routers collet, depending on where the cut is made, may have a greater impact on depth and that should be the measured point.
Setting up a cut accurately takes much more time than the actual work. Investing that time in an accurate and clean result is well worth the effort even if one has to do it over.
Quality work is something one can be proud of for many years.
- Reply
- Inaccurate
- Bruce W on Dec 11, 2015
- Purchased on Dec 27, 2014
can I cut one inch depth slot?
BEST ANSWER: 3/4" is the deepest.
- Reply
- Inaccurate
- Wally M on Feb 10, 2018
- Purchased on Apr 30, 2016
Do you carry a 1/32 3 wing slot cutter?
what is the shank hole size?
What parts do I need for a 3/4" deep x 1/4" H slot?
Related Products
More Suggestions
