Store Locator

Get Expert Advice

Return Policy

Gravity Feed HVLP Spray Gun

Get smooth, even HVLP coverage powered by your air compressor.
Item #
82% of 100
Painting and finishing projects are quick and easy with this affordable solution for larger spray jobs. Spray gun has 1/4" air inlet, 2-speed trigger control, spray pattern control knob on side of gun, and adjustable spray width, air inlet and fluid outlet. Non-bleeder type, gravity feed external mix.

  • 1.4mm stainless steel needle and nozzle set for primer work and spraying base coats and clear coats
  • Includes locking pressure regulator with gauge and 600cc plastic paint cup
  • Die-cast aluminum body with anodized finish

Accessories (sold separately):
  • Hands-free spray gun holder easily attaches to bench or wall with pre-drilled mounting holes. Funnel/strainer holding ring makes filling paint cup easy.
  • Disposable inline spray gun air filters help reduce painting defects. Removes moisture, oil vapor and rust particles that pass through conventional filters. High flow design minimizes pressure drop to spray gun. 100 PSI maximum pressure. Attaches directly to the air inlet of the spray gun.
  • Inline gravity feed mesh filters remove dirt particles from paint to protect against defects. Inserts into spray gun fluid inlet prior to cup installation.
  • Plastic paint cup (600ml capacity) for use with 38269 Gravity Feed HVLP Spray Gun only. Includes vented screw-on lid.
  • Compatible with #23768 3M #2 Adapter for EZ-Clean Spray System
Rockler Protection Plan

With the Rockler Protection Plan, you'll get accidental damage coverage immediately upon purchase of your tool. Plus, we will extend the manufacturer's warranty for your choice of an additional 1 or 2 years. We'll take care of all parts and labor for any repairs, with no deductibles and no hassles. If your tool can not be repaired, we'll gladly replace it. Available in the US only. Click here to learn more.

Standard Manufacturer's Warranty: 12 months
More Information
Brand Titan
Manufacturer Part Number 19000
Weight 2.6000
Tech Spec
  • 15-50 PSI operating pressure
  • 7-9 CFM air consumption
Pressure Range 15-50 psi
Style HVLP
4.1 / 5.0
23 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great gun does a nice job
April 18, 2020
3 months ago
Woodworking Experience:
This is my 1st experience with HVLP spray method. After reviewing several u tubes for techniques and completing 6 knotty alter doors plus about 100 feet of trim, I’m happy with the gun and the results. Is well built, adjustable, cleanable and exceeeds my skill as operater.
October 19, 2018
1 year ago
Works great,
Agree that the instructions were vague, but after watching a few you tube videos I had no trouble at all. Would have been the same for the more expensive guns, they all seem to function the same. The gun sprayed to perfection.
August 31, 2018
Woodworking Experience:
Bought this for a friend who says he loves it and has already used it on 7 pieces he made with great results.
February 12, 2018
over 2 years ago
Gravity Sprayer
Great product. Just hook up to your compressor and set the pressure gauge, gravity does the rest. Easy clean too.
December 23, 2016
over 3 years ago
Removed old finish. Apllied water based primer, 2 coats thinned latex paint and 1 top coat water based poly.
First spray gun and could not be happier. Finish outstanding. Be aware of air pressure and viscosity.
User submitted image
User submitted image
User submitted image
November 9, 2016
over 3 years ago
Cheap but quality!
Worked a charm! Love it with the waterborne products!
User submitted image
User submitted image
User submitted image
June 24, 2016
over 3 years ago
Woodworking Experience:
Great gun for a woodworker
I have used this to spray lacquer on cabinets so far. It is a very user friendly gun as well as a great price for a better quality hvlp gun. I am using mine with a 20 gallon compressor and it keeps up with it. This makes the fourth gun I have had and I have thrown away all my others cause they aren't even close to as good as this one.
March 29, 2016
over 4 years ago
Woodworking Experience:
HVLP spray gun is very easy to use and works outstandingly!
This system is one that I can highly recommend to everyone, even a novice. It is simple to operate and does a very high quality job. I just finished a fireplace enclosure using oak. I used a water based clear urethane finish with the system. I did the spraying in my garage at about 40 degrees F. (Very little if any odder with H2O based finishes and they dry quickly.) You can easily spray a second coat within a couple of hours.
January 17, 2016
over 4 years ago
Woodworking Experience:
Spray gun
Well made and way to use. Only use it for water based urethane and clean it by spraying hot soapy water, then plain water through it. So far so good
May 16, 2015
over 5 years ago
Woodworking Experience:
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 17 questions Browse 17 questions and 23 answers
Why did you choose this?
Rockler Store
To finish, cabinets and car siding for house.
Gregory G on Mar 16, 2020
Have a big project coming up.
Bruce R on Apr 26, 2019
To finish, cabinets and car siding for house.
Gregory G on Mar 16, 2020
To spray varnish on an oak table.
Ron H on Apr 28, 2019
Have a big project coming up.
Bruce R on Apr 26, 2019
To complete project finish
Patrick C on Apr 18, 2019
Reviews on Rockler!
Dezi C on Dec 26, 2018
Feedback on product
Jan D on Jun 16, 2018
There is too much info out there. I trust Rockler.
John on May 19, 2015
To spray varnish on an oak table.
Ron H on Apr 28, 2019
To complete project finish
Patrick C on Apr 18, 2019
can it be used for solvent based material and gel-coats? and are different tip sizes available?
mark g on Mar 27, 2016
will this gun spray oil based paint?
kevin s on Jul 7, 2015
BEST ANSWER: Yes, it may require some thinning with paint thinner depending on the product
Can you spray latex paint?
A shopper on Apr 29, 2015
Can I use oil paint with this spray gun.?
karlos on Jul 13, 2016
will this spray water based paint such as GF milk paint and their finishes?
Rex R on Aug 10, 2015
Where can I get the 3M EZ-Clean Spray System? And refills?
Geoff W on Feb 3, 2018
Can you use polyurethane without thinning the polyurethane?
Denis C on Jan 2, 2016
BEST ANSWER: There may be some types of poly that would work. I had to thin mine to get a good spray pattern
Can you use this gun with an air compressor?
Mark R on Jun 13, 2019
BEST ANSWER: Yes, I use it with my small “pancake” compressor. It will run constantly since the tank is so small, but it works.
Who makes this thing? I am always suspicious when an item is not branded. Are they ashamed to put their name on it?
Tom D on Jan 22, 2017
BEST ANSWER: The name on the box is Vaper. The box says made in China.
Where can I get different tip and needle sets for this gun?
splinters on Apr 11, 2020
BEST ANSWER: There are two other sizes available. Rocker customer service can contact manufacturer. I have talked to the manufacturer and he said go thru rockler
will this work with a pancake compressor?
Travis I on Apr 14, 2020
BEST ANSWER: This spray gun will work with your compressor if it is capable of delivering 15 - 50 PSI and can maintain 7 - 9 CFM.
Are there larger spray tips/needle sets available? (1.7 mm, 1.8 mm, 2.0 mm)
splinters on Apr 7, 2020
BEST ANSWER: yes you can get other spray tips to suite your needs for other spray options.
Can you purchase different tips?
Chris J on Dec 5, 2019
BEST ANSWER: Yes tips are base on fluid viscosity
anyone know what size hex wrench removes the internal brass head for deep cleaning?
Jay L on May 13, 2019
Is this appropriate for heavier viscosity ceramic glazes?
ALEX H on Dec 4, 2018
Will this fit the HV6003 sprayer?
Gary K on Dec 1, 2018