In stock
Grouped product items
Product Name Price Qty
Butt Hinge Guide Bushing, 51/64'' O.D. x 5/8'' I.D. x 9/16'' L
Butt Hinge Guide Bushing, 51/64'' O.D. x 5/8'' I.D. x 9/16'' L Item #: 60540
In stock
$7.99
Each
Lock Face Guide Bushing, 3/4'' O.D. x 21/32'' I.D. x 9/16'' L
Lock Face Guide Bushing, 3/4'' O.D. x 21/32'' I.D. x 9/16'' L Item #: 60549
In stock
$7.99
Each
Stanley F 3 Guide Bushing, 5/8'' O.D. x 17/32'' I.D. x 9/16'' L
Stanley F 3 Guide Bushing, 5/8'' O.D. x 17/32'' I.D. x 9/16'' L Item #: 60531
In stock
$7.99
Each
General Guide Bushing, 1/2'' O.D. x 13/32'' I.D. x 5/16'' L
General Guide Bushing, 1/2'' O.D. x 13/32'' I.D. x 5/16'' L Item #: 63073
In stock
$7.99
Each
1/2" Dovetail Guide Bushing, 7/16'' O.D. x 11/32'' I.D. x 5/32'' L
1/2" Dovetail Guide Bushing, 7/16'' O.D. x 11/32'' I.D. x 5/32'' L Item #: 63065
In stock
$7.99
Each
General Guide Bushing, 3/8'' O.D. x 9/32'' I.D. x 5/16'' L
General Guide Bushing, 3/8'' O.D. x 9/32'' I.D. x 5/16'' L Item #: 43877
In stock
$7.99
Each
Short Shank Guide Bushing, 5/8'' O.D. x 17/32'' I.D. x 7/32'' L
Short Shank Guide Bushing, 5/8'' O.D. x 17/32'' I.D. x 7/32'' L Item #: 24212
In stock
$7.99
Each

Guide Bushings

Item #
GRP1522_1
Rating:
82% of 100
Guide Bushings
Guide Bushings

When template work is in the picture, nothing beats the simplicity and utility of a router template guide bushing. With no moving parts to break, router bushings pump out part after identical part, and are never worse for wear. These guide bushings are available in a wide range of diameters for different bits, dovetail jigs and other template routing applications. They fit perfectly in any router base with a 1-1/4" diameter center hole. Locking nuts (#63107, sold separately).

(1) Guide Bushing
More Information
Brand No
Manufacturer Part Number No
Weight 0.0900
Tech Spec
  • Fits: Any router base with a 1-1/4" diameter center hole
Technical Documents No
Type Guide Bushing
Prop 65 Warning WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
4.1 / 5.0
16 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
4
0
1
2
Gets the job done. Very sturdy
May 11, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
Router bit guide.
A must for installing door hinges and hardware. I make my own templates and the 1/2" is my go to bit size.
July 15, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Vintage turntable plinth in walnut
I used one of these guide bushings on my plunge router, along with a hardboard template that I created, to do the final shaping of this Thorens TD-124 turntable plinth. The client and myself are thrilled with the result.
The guide bushing helped to achieve a very precise reveal around the turntable.
The base is pretty deep so I cut it in several passes with a plunge router.
Note the Rockler branding iron label inside.
May 1, 2017
Woodworking Experience:
Advanced
Gotta Have It!
All the pieces of the Jig-It system rely on having the proper bits and bushings.
March 4, 2017
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
The sales person knew just what I needed
The guide bushing I perchased worked great ,and it just what I needed , thank you
February 19, 2017
Woodworking Experience:
Beginner
Guide Bushing use
Used this guide bushing along with a template to route the juice groove.

Easy to install and works great.
Maple & Cherry Cutting Board
Maple & Cherry Cutting Board
January 22, 2017
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Reliable tool
Works well. Easy to mount.
July 5, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
guide bushings
theses bushings eventually wear out so I purchased several. The steel last much longer than the brass
November 27, 2015
Purchased
over 3 years ago
Woodworking Experience:
Advanced
I just ordered this to use...
I just ordered this to use it as a centering guide for my router base plate and setting up my router table base plate for drilling the router mounting holes. I just cut down a 1/4" rod and chucked it up in the router and I had a quick cheap centering system.
November 28, 2008
The 1/2” bit touched the side but shaved it to necessary clearance.
May 22, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 50 answers
Why did you choose this?
Rockler Store
I have a tool for drilling shelf pin holes and I want to have a guide and nut to store with it, this is the guide part of the deal.
EDWARD L on May 14, 2018
Recommended for the Rockler Jig It
James N on Mar 25, 2018
I have a tool for drilling shelf pin holes and I want to have a guide and nut to store with it, this is the guide part of the deal.
EDWARD L on May 14, 2018
To using with template when making 3/8” mortise
Armando D on May 4, 2018
Recommended for the Rockler Jig It
James N on Mar 25, 2018
replace worn out bushing
Don M on Mar 10, 2018
Bushing is required to complete project....thanks
Judy K. A on Jan 29, 2018
same as above.
Merland R on Jan 23, 2018
because it works with my dovetail jig.
Gary A on Jan 20, 2018
Replace missing bushings in a set
Stephen M on Jan 20, 2018
Ring came loose and damaged tail template and bushing
Robert M on Jan 15, 2018
part of requirement for hinge Jig
Joe O. on Jan 3, 2018
for use with leigh dovetail jig
James R on Dec 18, 2017
Use with rockler dovetail jig
Michael K on Nov 18, 2017
Need it for the Dovetail jig
Edward M on Oct 23, 2017
I need this to finish a project using a hinge template.
Gene B on Sep 30, 2017
Special item
THOMAS K on Aug 22, 2017
I wanted to have some back up bushings for my Rockler dovetail jig.
Clay L on Mar 26, 2017
Hinge mortising
Randy K on Jan 30, 2017
fits well
Mike S on Jan 4, 2017
less hassle to set up and use
Paul H on Jan 2, 2017
Used to route a juice groove using a template in the cutting board I made.
Patrick C on Dec 27, 2016
I need it
Herbert M on Nov 23, 2016
need for jig it system.
Robbi T on Nov 22, 2016
to rout hinge mortise
Fravel M on Nov 17, 2016
Longer guide
Ian N on Oct 13, 2016
custom project
Dennis O on Oct 4, 2016
Used per Jig requirement for routing.
Dipak P on Oct 3, 2016
Recommended for mortise jig
mmalinco on Sep 20, 2016
Needed it.
Fred M on Jul 26, 2016
WORK WITH DOVETAIL JIG
scott s on Jun 18, 2016
For use with Quadrant Hinge Mortise Template
P S on Apr 23, 2016
Ease in using JigIt templates
Alexander B on Mar 26, 2016
To complete a Humidor Project
George J on Mar 21, 2016
this and above are a set
Marilyn E on Jan 18, 2016
Replacement
Gerard N on Jan 2, 2016
Lost my old one. Fits my router.
Jerold M on Nov 18, 2015
need for Stanley door hinge templete
david t on Oct 8, 2015
replaced damaged guide
doug a on Aug 21, 2015
price and fit, the only bushings i found that are made for a 1-1/4" hole
john d on Jul 2, 2015
need to cut my dovetail joints
Roy K on Jun 24, 2015
I got these to use in my Bosch plunge router base.
Randy I on Jun 23, 2015
It fits my templet
Andrew G on Jun 14, 2015
I need this item for a project
Arthur O on Jun 3, 2015
for a missing piece for my router
Harold R on Jun 1, 2015
my old guide that came with a sign making kit didn't last very long and I needed something more solid
Brian B on May 30, 2015
bushing was not fitting well, so replacing
Bruce K on Apr 22, 2015
To using with template when making 3/8” mortise
Armando D on May 4, 2018
replace worn out bushing
Don M on Mar 10, 2018
I ordered the jig-it to install quandrant hinges and ordered the template to install small quandrant hinges and the hing will not fit the routed space?
Johnny S on May 18, 2016
i am running a router and im using a router bit just for a stright cut, along my template but its more of a free hand i dont have a guide so im cutting into my template. what do i need for my router to make it ride along my template?
shane t on May 16, 2016
BEST ANSWER: First, you'll need to make sure your router can accept screw-in style guide bushings (a.k.a. Porter-Cable style). Porter Cable, DeWalt, and Makita usually do, Bosch needs an adapter or two, and some Craftsman models will take these bushings as well. Next, you'll need the locknut (#63107) and the bushing with an inside diameter just larger than your router bit. Most often, this will be #43877 for 1/4" bits or #24212 for 1/2" bits.
do the guide bushings you offer fit a Skill router model 1823?
David K on Jun 15, 2017
BEST ANSWER: They are pretty universal, I have used on Porter Cable & Bosch.
I have a rockler dovetail jig. What guide bushing do I need or can I buy a set of bits and guide bushings?
Robert W on Apr 13, 2015
BEST ANSWER: You will need the Guide bushing (#63065) and the locking nut (#63107)
which bushing goes with the q3 templet ?
jack l on Mar 6, 2018