$3,339.00 Each
Additional Shipping Charge: $100
Direct Ship
The premium features of a larger lathe, but in a smaller package for the home shop—includes heavy-duty cast iron legs!

Harvey Turbo T40 14'' x 24'' Lathe with Cast Iron Legs

Item #
51178
Rating:
100% of 100

The T40 Turbo Lathe from Harvey Woodworking is powered by an industrial servo motor much like those used in state-of-the-art CNC machines. This high-performance motor provides an ultra-fast 2 millisecond response time for torque demand, 100x faster than most lathes. In addition, the spindle comes to a quick stop after power down. The lathe features a digital RPM readout and is reversible. The headstock swivels 90° for turning of large diameter work. Fit and finish are excellent: high-grade cast iron with a baked-on finish and solid steel locking handles with foam grips at every major adjustment point. With a 14'' swing over the bed and 24'' between centers, it makes an excellent mid-sized lathe with the premium features of much larger lathes.


Features:
  • Ultra-fast 2 millisecond response time for torque demand
  • Digital RPM readout
  • Two speed ranges: 50 to 2,800 or 75 to 4,300 RPM
  • Quick spindle stop
  • Forward and reverse turning
  • 178 pounds of premium-grade cast iron and steel
  • Headstock spindle is supported by 3 oversized ball bearings
  • Specially hardened alloy tool rest edge.
  • Solid steel, foam-covered locking handles for all major locking points (headstock, tailstock, tool rest support)
  • Forged and ground spindles
  • 90° headstock swivel, allowing for large diameter pieces
  • 24-position spindle indexing system with tool-free locking
  • Baked finish for clean look and excellent durability
  • Two speed ranges: 50 to 2,800 or 75 to 4,300 RPM

Package includes a set of cast iron legs!

Legs are built from 140 lbs. of sturdy cast iron to minimize vibration. The stand raises the center line of the lathe to 42'', and the included leveling feet raise it another 2'' to 4'', and add stability on uneven floors.

  • There is an additional $100.00 shipping charge for this item.
  • Ships directly from the manufacturer.
  • Estimated Delivery time: 14 days.
  • The carrier will need to know if delivery is to a residential address. There is no charge for this.
  • The delivery truck will need a lift gate if loading dock is not available. There is no charge for this.
(1) Harvey Turbo T40 14'' x 24'' Benchtop Lathe
(1) Set of Cast Iron Legs
More Information
Weight 429.0000
Tech Spec
  • Maximum Swing over Bed: 14''
  • Maximum Swing over Banjo: 10''
  • Distance Between Centers: 24''
  • Spindle Motor Drive: Industrial Servo Motor system, 1HP/220V/50Hz(60HZ)/1-Phase
  • Spindle Speed (variable): 50-2800 RPM?low range), 75-4300 RPM?high range?
  • Tool Rest Length: 12''
  • Spindle Thread: 1-1/4''x 8 TPI UNS
  • Spindle Through Hole Dia.: 1/2''
  • Spindle Taper: MT#2
  • Tailstock Travel: 4''
  • Tailstock Quill Through Hole Dia.: 3/8''
  • Tailstock Quill Outer Dia.: 1-1/4''
  • Tailstock Quill Taper: MT#2
  • Spindle Indexing: 24 positions
5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Powerful, Versatile, Compact and Pretty
I'm not a seasoned turner but I've turned enough to know what I wanted in a lathe and this one met all of my needs. I looked at a lot of lathes before making this purchase. I wanted something powerful enough to turn small bowls with a rotating head stock and versatile enough to rotate in both directions at any speed. Again, this one did it all. It's heavy with the cast iron legs attached but not so cumbersome that you can't put it on some dollies and move it around the shop. All of the included accessories are heavy duty and well made.
I had a couple of issues at first and I contacted tech support and they were GREAT! They got my problem solved and they made me feel at ease with my purchase since they were so accessible and knowledgeable.
October 19, 2018
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question
What type of power plug comes with this lathe?
Charles W on Mar 11, 2018
More Suggestions