$69.99 Each
In stock
An excellent and affordable sprayer for thinner coatings such as clear sealer, polyurethane, primer, stain and varnish.

HomeRight Finish Max Fine Finish HVLP Sprayer

Item #
90% of 100
HomeRight Finish Max Fine Finish HVLP Sprayer HomeRight Finish Max Fine Finish HVLP Sprayer HomeRight Finish Max Fine Finish HVLP Sprayer HomeRight Finish Max Fine Finish HVLP Sprayer HomeRight Finish Max Fine Finish HVLP Sprayer HomeRight Finish Max Fine Finish HVLP Sprayer HomeRight Finish Max Fine Finish HVLP Sprayer HomeRight Finish Max Fine Finish HVLP Sprayer DIY Lawn & Garden Storage Shed: Part 1
HomeRight Finish Max Fine Finish HVLP Sprayer

Achieving a smooth, even topcoat is astonishingly easy if you're armed with the HomeRight Finish Max Fine Finish Sprayer. Thanks to its HVLP design, you get minimal overspray, meaning the finish goes on your project rather than all over your shop. The sprayer is ideal for thinner viscosity materials such as clear sealer, polyurethane, primer, stain and varnish, but may also be used with paint, provided the material is thinned properly with the included viscosity cup. The sprayer is easy to set up, easy to use and easy to clean. It has a tight spray pattern that is ideal for working finish into varied surfaces like deck spindles, furniture, louvered shutters and latticework. The adjustable spray cap and trigger control give the user easy control over the shape of the spray pattern.


  • Spray cap is adjustable for three different spray patterns: horizontal, vertical, and circular.
  • Brass spray needle and housing offers maximum durability.
  • High volume low pressure (HVLP) design minimizes overspray, mess and waste.
  • Trigger control knob is adjustable for spray patterns from 1'' to 6'' wide.
  • Viscosity cup makes it easy to dilute coatings for optimal results.
  • Air nozzle can be attached to use the sprayer as a blower for removing dust etc.
With the Rockler Protection Plan, you'll get accidental damage coverage immediately upon purchase of your tool. Plus, we will extend the manufacturer's warranty for your choice of an additional 1 or 2 years. We'll take care of all parts and labor for any repairs, with no deductibles and no hassles. If your tool can not be repaired, we'll gladly replace it. Available in the US only. Click here to learn more. Standard Manufacturer's Warranty: 24 months
(1) HomeRight Finish Max Fine Finish HVLP Sprayer
(1) 27 oz. Paint Cup
(1) Viscosity Cup (for checking coating viscosity)
(1) Air Nozzle (for use as a blower)
(1) Cleaning Brush
More Information
Brand HomeRight
Manufacturer Part Number C800766.D
Weight 3.2000
Tech Spec
  • Adjustable Spray Patterns: Horizontal, Vertical and Circular
  • Voltage: 120V
  • Wattage: 400W
  • Motor RPM: 34,000
Technical Documents
4.5 / 5.0
35 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
a really good spray rig for the money
January 19, 2019
over 2 years ago
Woodworking Experience:
Great product for finishing up projects. Easy to use and cleans up without a mess.
January 14, 2019
2 months ago
Woodworking Experience:
Thinning latex for spraying
Really liked the gun. Great with poly. All I hear is thin the heavy bodied latex paints. No one discusses how to thin the paint. I have found using Flotrel type product ( 2 caps per qt) then thin with water until the viscosity cup empties between 30-45 secs. That seems to give me a good results. Will take an additional coat to give good coverage. I prime all paint, apply color coats, and finish with 2-3 poly coats. I get a very smooth and durable finish with this method
December 29, 2018
6 months ago
Woodworking Experience:
Easy to use and good results
Just recently purchased this sprayer. Used it for polyurethane on a woodworking project (no thinning necessary). Easy to use and control, and not very heavy. It is easy to control the amount of material that is sprayed. I recommend the vertical spray pattern rather than the round pattern. I have always brushed these finishes, but a spray finish from this sprayer is much nicer, and so much easier and faster. In about an hour, I completed each coat of finish on a project that would usually take me 2-3 hours to brush. That hour included getting set up and cleaning up as well!!!

The unit is also easy to clean. The paint bucket is made of a plastic which almost repels the paint material (high surface tension, I suppose). This means it cleans up nicely. A quick few swirls of a small amount of paint thinner in the bucket cleaned the bucket. Discard this, then add a little more paint thinner and run the sprayer until all the paint is cleared. Wipe down external surfaces and the feed tube, then clean the nozzle cover and wipe the nozzle area. That's pretty much it.

I had hoped to set up a paint booth in my garage, but I think the overspray is a little too much for the enclosed space, so I used it outside. Perhaps it would work inside if properly ventilated, or if using latex paint. The instructions suggest that you practice with water on cardboard, to get a feel for how it works, and I would agree with that.

Anyhow, I have always avoided sprayers as I thought they would be difficult to use and clean up. This one is definitely not a problem! Give it a try.
December 27, 2018
Woodworking Experience:
The best paint gun in the market and best value
This machine never disappoints. Its light. Easy set up. Easy to use. Easy to clean and always deliver a perfect paint finish. I highly recommended for both professional and occasional users.
I use it with all types of paint, top coats and stains. 5*
User submitted image
User submitted image
September 10, 2018
7 months ago
Woodworking Experience:
Straight forward and easy to use.
May 10, 2018
11 months ago
Woodworking Experience:
Perfect for like two years molding that you would have to cut in other wise!
First time ever using a paint sprayer but it's a smaller Sprayer great for details around trim work that was three stories in the air and it has a nice line to it where you don't need to tape off once you get the hang of it !
May 6, 2018
11 months ago
Woodworking Experience:
Great sprayer
April 28, 2018
11 months ago
HomeRight HVLP Sprayer
So far this sprayer has performed great. I have sprayed two projects with Polyacryllic and they turned out great. A lot easier than brushing and the finish is much smoother.
April 15, 2018
12 months ago
Woodworking Experience:
Excellent for the cost
I am not a spray expert, but I used this on water-based GF high performance varnish. It worked well although I need more use to complete master it.

I would not spend $300 to $400 on a HVLP unit until I learn more.
April 7, 2018
11 months ago
Woodworking Experience:
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 23 questions Browse 23 questions and 77 answers
Why did you choose this?
Rockler Store
Reviews were solid.
Luke C on Jan 6, 2019
I bought one for myself recently, used it today for the first time and wanted to buy one for my son up in college while he is building himself a bed. Great Price!
JEFF B on Dec 11, 2018
Reviews were solid.
Luke C on Jan 6, 2019
Product reputation and the sale price together pushed me over the line.
Harry on Dec 21, 2018
I bought one for myself recently, used it today for the first time and wanted to buy one for my son up in college while he is building himself a bed. Great Price!
JEFF B on Dec 11, 2018
painting exterior door
John H on Jul 31, 2018
I need a sprayer, and this one seems to be what I'm looking for....
Robert P on Jul 25, 2018
To spray my deck. I'm tired of using a brush on the spindels.
James C on Jun 27, 2018
because of the price and it will do the job I'm working on
kathleen c on Apr 27, 2018
Hoping it's a quick easy cleanup compared to other sprayers.
Michael L on Apr 14, 2018
Heard it had a good review and wanted a sprayer that was not too expensive
Mike S on Mar 29, 2018
I've been restoring furniture for a little over 20 years, however, I've yet to try a sprayer.

I chose the HomeRight Finish Max because it was inexpensive and the operation appears to be simple and straightforward.

I believe this will be a good "beginner" sprayer. I can practice with it, see if I've got any ability, and determine whether I like the results.

If I do love using it, I will likely invest in one with more features and accessories.
Kellie1575 on Mar 22, 2018
Needed an electric sprayer for varnish and the price, as well as, reviews were favorable.
Beverly F on Mar 16, 2018
Project coming up
Darrell J on Mar 16, 2018
I have a small shop and want to give it a try.
James G on Feb 10, 2018
Should be nice to have around.
Ronald C on Dec 6, 2017
Price and customer ratings
Ronald M on Nov 30, 2017
Price - I've never used a HVLP sprayer before...
Michael H on Nov 11, 2017
I chose this sprayer based on all the positive reviews.
Joe D on Oct 31, 2017
Needed an economical sprayer, willing to try this one
Curt S on Sep 20, 2017
Good Price
Philip S on Aug 26, 2017
magazine recommendation
William G on Aug 9, 2017
for small jobs instead of using an airless sprayer hopefully easier cleanup and less waste
Denis A on Jul 16, 2017
cost and simplicity
John M on Mar 24, 2017
sale price
Attn: ROGER L on Mar 24, 2017
I'm new to HVLP spray finishing and this seemed to be good product to start with.
Chad H on Mar 9, 2017
To stain a cedar perg0la over my patio.
David G on Feb 15, 2017
Needed a finish sprayer so decided to try this one
Ken E on Jan 16, 2017
Dino E on Jan 15, 2017
Patricia S on Jan 11, 2017
great price.
Harry homeowner on Dec 15, 2016
Seen it in your catalogue.
Jonathan K on Nov 26, 2016
Searched websites and this was highly recommended
Dick Q on Oct 23, 2016
need for a project
JeRoy C on Oct 18, 2016
Good for small jobs I make
Wayne D on Oct 6, 2016
Saw it used by a youtuber and liked the simplicity and not having to use a compressor.
Luis G on Sep 12, 2016
Read lots of good reviews and have been wanting to purchase a spray painter for a while.
Tina R on Sep 11, 2016
Looks like an inexpensive sprayer for spraying paint. (I mostly spray finishes with my HVLP strayer) I just need something to do a few small paint jobs. I saw it work and it looks like it will be great for my small jobs."
Lona L on Sep 10, 2016
I have several doors to finish. I hope this product works good
Arthur R on Aug 3, 2016
Low price
Darrell L on Jul 31, 2016
just what I've been looking for.
andy e on Jun 1, 2016
Need to paint my deck.
Vernon S on Apr 24, 2016
To use to stain the things I make. It looked like it would be easy for me to use,\.
Gerald P on Apr 12, 2016
Coming from Rockler, I trust it will work well.
Floydster on Apr 10, 2016
I'd like to develop skill in use of spray so I can compare results with brush application
Jan S on Mar 23, 2016
Looks like a great product, neat and clean
Paul B on Mar 12, 2016
It handles wood finish and polyurethane finish
Alan H on Mar 10, 2016
price and to see if it will make staining a little easier
Tom on Mar 9, 2016
Price and ease of use
Ralph V on Mar 9, 2016
gregory b on Mar 6, 2016
Product reputation and the sale price together pushed me over the line.
Harry on Dec 21, 2018
painting exterior door
John H on Jul 31, 2018
Can latex paint be sprayed without thinning with water?
Scott K on Mar 23, 2016
BEST ANSWER: No it can not...It will have to be thinned out
Can you tip this spray gun and spray horizontal surfaces, such as trim laid out on saw horses or shelves in a cabinet?
Joe N on Mar 2, 2016
BEST ANSWER: The pickup pipe has an angled bottom so if you turn the pipe in the right direction, it is capable of picking up fluid at a fairly severe angle. You should have no problem, but I'm sure it couldn't be used at a completely horizontal angle.
What is the air volume needed
Ted P on Mar 2, 2016
BEST ANSWER: This appears to be a self contained unit. The electrical cord would indicate that it has its own air power. Therefore, no external air source would be needed.
GM, Can you use this device to paint stainless steel containers with body shop paint?
Sonya A on Aug 17, 2016
BEST ANSWER: I tried poly sprayed on vertical surfaces. Won't do that again. You'd need some practice to determine the thinnig formula with paint. This gun doesn't have the range of adjustment that an old fashioned spray gun has. I haven't yet tried it on a horizontal surface. the instructions don't recommend tipping it that far but I will anyway. If that doesn't work, I'll throw it away.
How quiet is this sprayer. Most electric sprayers I have seen are very noisy.
Floydster on Mar 9, 2016
BEST ANSWER: I've used a few other sprayers and this one is quieter than most, but I find noise can be relative. What I find acceptable may be too noisy for some...
How much thinner does it take to clean it up and is it difficult to clean?
Claude on Mar 9, 2016
BEST ANSWER: No more difficult than any other sprayer. The recommendation is to fill the reservoir up halfway and run it through. It hold 0.8L (28oz), so it would take 0.4L (14oz) to clean properly. just spray it into a container and use the same cleaner to clean the individual parts.
Does this unit require a regulator or is built in? If not, at what is pressure needed to operate this spray Gun?
Frank on Mar 20, 2016
BEST ANSWER: Self contained not driven off compressor
How much does the unit weigh? Is it comfortable to use?
Benjamin on Mar 10, 2016
BEST ANSWER: 2.76 lbs (1.25kg) dry. Not particularly heavy, how strong are you?
I already have an HVLP sprayer, Item #: 61577, which has worked well for latex paint. Would this system be better for clear finishes than the one I already own?
GP on Mar 25, 2016
BEST ANSWER: Hi Gary, I have only had mine for a short time---I used it to spray teak oil onto a broad expanse of wooden garage doors---it worked fine for that---but clearly this wasn't a "fine finish" application. I would definitely experiment before trying to spray a nice finish onto a project. My guess is that you could probably make it work.
I'm thinking of making cupboard doors and would like to spray them. What kind of paint would I use for a matt or gloss finish on MDF and is this spray gun suitable for this?
John M. on Apr 8, 2018
Can this sprayer be used to spray nitrocellulose lacquer? I use nitro to finish guitars that I build and/or refinish. I do not have a proper HVLP setup right now, so I’ve been using the Preval sprayers. They work fairly well, but I find that I have to thin the nitro more than I’d like, which requires more coats. The air cartridges run out rather quickly as well, so I’m looking for an inexpensive replacement for the time being. Thanks!
MKoback on Jul 16, 2018
BEST ANSWER: i have never sprayed nitro lacquer with mine but i do spray polyurethane with it and it works very good.
Can you spray tung oil with this?
Justin B on Apr 1, 2017
BEST ANSWER: Yes. I have used it to spray varnish which it thinker than tung oil. The sprayer comes with a funnel to check the viscosity. If it is not thin enough, then you add paint thinner. This unit is inexpensive and it is a little hard to clean. If you are going to do a lot of work over time, I suggest you get a better quality unit. If this is a one time project, this unit will work fine.
Using the provided cup, how much time is needed for optimal atomization?
Paul W on Aug 30, 2018
BEST ANSWER: I find that thinning latex paint so the viscosity cup empties in 30 to 35 seconds gives the best results. For a good quality latex this requires adding 20-30% water. For other paints, a chart is provided on page 6 of the instructions.
Can you spray lac. Paint ?
Jerry G on Jun 27, 2018
BEST ANSWER: I have not tried lac. Paint yet, but have used it to spray and stain and polyurethane.
When thinning latex using the viscosity cup, what is the recommended time for the paint to drain?
Paul W on Mar 28, 2018
BEST ANSWER: I find that thinning latex paint so the viscosity cup empties in 30 to 35 seconds gives the best results. For a good quality latex this requires adding 20-30% water. A chart is provided on page 6 of the instructions.
Could this be used to spray relatively thin (think WD40) to protect against rust on the undercarriage of a car?
OGNDY on Feb 4, 2018
BEST ANSWER: it would work, but WD40 won't stay there long enough to do you any good. rain or snow would take it fast.
when I tighten the paint bowl as tight as I can turn it, and turn it on, paint will leak out of the top of the bowl.. am I missing a rubber O ring gasket?
mike m on Apr 1, 2017
BEST ANSWER: Just looked at mine there is a black rubber O ring up in the blue top. I use this sprayer a lot and it is the best i've found.
Can this paint sprayer be used with a rust oleum paint for doing gutters?
Kevin N on May 3, 2018
can gel stains be used with this sprayer?
Tim H on Mar 6, 2018
BEST ANSWER: Have never used my sprayer.
The cup size is listed as 27 oz. Can standard 32 oz cup liners be used in this?
Nick P on Feb 19, 2018
BEST ANSWER: I cannot give you an accurate answer. I did not measure the amount of finish I placed in the cup. I preety much eye balled it.
Can I use shellac?
James G on Sep 10, 2016
BEST ANSWER: You can use this sprayer for shellac, but you must thin it out to the consistency as outlined in the product pamphlet.
Leaks from tank gasket. Very annoying. Any solution to this?
Jim R on Oct 7, 2018
More Suggestions