Inlay Bushing and Bit with Removable Collar
This set allows you to use a single template to rout both the inlay piece and a precisely sized recess to accept the inlay. It includes a two-piece Template Guide Bushing, a 9/16" diameter Removable Collar and a 1/8" diameter spiral up-cut bit (1/4" shank). Rout the recess in the main workpiece with the Removable Collar installed, then take it off to rout the inlay piece. The Guide Bushing fits router baseplates with a 1-3/16" diameter stepped center hole designed for two-piece guide bushings.Notice: It is strongly recommended that a plunge router be used for routing inlays.
(1) 9/16" Diameter Removable Collar
(1) 1/8" Diameter Spiral Up-Cut Bit (1/4" Shank)
|Manufacturer Part Number||TAIB-4-18|
WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.