$44.99 Each
Out of stock

Irwin 10" x 50T Marples ATB+R Combination Saw Blade

Item #
47810
Rating:
86% of 100

This 50-tooth combination blade features mid-size hook teeth with extra-deep gullets every five teeth. This allows efficient chip ejection during rip cuts, while maintaining excellent finish quality on crosscuts. The blade also features a thin kerf design, which reduces dust and material waste, and allows for use on all table saws, from lower-powered portable machines to high-end cabinet saws.


IRWIN is proud to introduce a full line of fine woodworking saw blades that are manufactured in Italy to the highest standards of precision required for fine woodworking and finish carpentry. These industry leading laser-cut, thin kerf saw blades are produced in a highly-automated, state-of-the-art facility in Udine, Italy - the heart of high-quality circular saw blade manufacturing. Engineered with oversized, high-quality carbide, the new Marples Woodworking Series saw blades provide the extended life and flawless finish professional woodworkers and finish carpenters demand.


Features:
  • Extra-sharp, oversized carbide teeth are re-sharpenable for long life
  • Precision tensioned for flawless cuts
  • Heat-resistant non-stick coating reduces gumming for easy cleanup and truer, cleaner cuts
(1) Irwin Marples 10" Saw Blade, 50T ATB+R
More Information
Brand Irwin
Manufacturer Part Number 1807368
Weight 1.7500
Tech Spec
  • Grind: ATB+R
  • Kerf: 0.098"/2.5mm
  • ATB Angle: 15°
  • Arbor Size: 5/8"
  • To be Used On: Table Saw and Miter Saw
Tech Docs No
Kerf Width 0.098"
Saw Blade Diameter 10"
Material Cutting Wood
Number of Teeth 50
4.3 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
2
0
1
0
Excellent overall blade
Great all-purpose blade.
April 13, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
excellent saw blade
I recently made 15 bird houses out of plywood and osb. All of my cuts were smooth and straight with no tear our or burning. I am very pleased with this blade.
November 24, 2013
I've been using this blade since...
I've been using this blade since January 2013 have a lot of oak ash cherry pine and a ton of 3/4 ply for cabinet cases and I have yet to get any burning except for when I tried to force the cut . I have cut up to 3 inch stock with out any problems . Not sure what this last guy was doing but I'm sold on these blades I spend last money on blades which allows more money to buy stock . People don't care so much about what blade I use as much as what I can produce and that's why we do what we do . And if I can save a little here and there on common supplies that makes me happier
September 8, 2013
Great blade, has more carbide than...
Great blade, has more carbide than most blades, can be resharpened many times. Great price, can't argue. Runs really quiet also.
May 19, 2013
This blade wobbled until I fixed it.
I'm fairly new to woodworking, but I noticed this blade "wobbled" just a tiny bit. After looking at a bit, I suspected a bit of saw dust got between the blade/washer during installation, so I decided to remove blade to clean arbor/washers off. I didn't see any chips or dust, but I did see some yellow paint flecks on washer. Noticed the yellow "IRWIN" paint near arbor was chipping off. This paint is raised/embossed on blade. I scraped it off to the blue background. Re-installed blade. PERFECT. I've not heard or read about this problem before. Just thought I'd share this in case someone googles the problem, maybe they'll find this. Have not used the blade much, but it does seem to cut well and very clean. I'd glue the cuts up from it, but again, I'm very new to woodworking and not as picky as some might be.
December 23, 2015
Woodworking Experience:
Beginner
Nice blade
I recently cut some 9/4 red oak with this blade and it went through it with no problem, and didn't leave any burn marks. I didn't give it 5 stars because the cut was a "smooth as sanded" finish, but it wasn't terrible either. For $45, you can't go wrong.
January 23, 2014
 After just a few cuts have...
 After just a few cuts have put this blade away for ever. It did not cut and leave a "smooth as sanded finish" or "cuts like a hot knife" as the first two review claim. It would of course depend somewhat on the thickness of the material being cut. I could not use this blade for building furniture. It did cut plywood pretty well, but left burn marks and a very rough cut on 2" Cherry. In fairness, it is half the price of my regular blade, but in the cuts it shows why.
April 16, 2013
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 4 answers
Why did you choose this?
Rockler Store
Needed a new blade for some oak, maple, walnut ripping without burn. Read the Reviews and I was sold. I trust Rockler.
Michael S on Apr 21, 2018
Irwin makes good products...
David S on Nov 24, 2017
Needed a new blade for some oak, maple, walnut ripping without burn. Read the Reviews and I was sold. I trust Rockler.
Michael S on Apr 21, 2018
I need a new blade and irwin is a good brand
Jack D on Jan 31, 2018
Irwin makes good products...
David S on Nov 24, 2017
Was a great value.
Leo T on Jan 14, 2017
TRY OUT BRAND
Robert E on Jul 24, 2016
great blade
michael j on Mar 16, 2016
trust the name of this product
micheal k on Feb 19, 2016
Price
Greg L on Sep 15, 2015
I own many Irwin Marples tools and I chose this item knowing that I will receive a Quality product.
Harry on Jun 12, 2015
I used this blade previously and liked it.
Donald H on May 29, 2015
needed a flat bottom cut
James O on Apr 8, 2015
I need a new blade and irwin is a good brand
Jack D on Jan 31, 2018
Was a great value.
Leo T on Jan 14, 2017
Just want to confirm that this blade has some flat top raker teeth to clean out the bottom of the cut?
Troy G on Apr 12, 2017
BEST ANSWER: Excellent blade, clean cut, with little to no dust.
What is the blade body plate thickness?
Brian L on Apr 5, 2017
BEST ANSWER: With a decent dial caliper I measured 0.074" away from the edge. That's about 0.004" less than 5/64ths.