Store Locator
Special Price $349.99 Each $399.99 Each
Oversold Until 12/17/2019
QTY

Get Expert Advice

Return Policy

Jet 1000CFM Air Filtration System with Remote

This powerful unit is perfect for the smaller home shop!

Item #
24770
Rating:
94% of 100

Simply hang it from the ceiling and turn it on, and it will clear the room of those fine dust particles. This unit was the first with remote control, timer and three speeds – now standard in the industry.


Features:
  • Disposable Electrostatic Outer Filter attracts more dust particles than standard filters
  • Inner Pocket Filter is removable for easy cleaning
  • Easy Grip Handles allow easy portability of unit
  • Four Eye Bolts (with AFS-1000B only) let you hang unit from shop ceiling
  • Remote Control has built-in timer with 2, 4 and 8-hour settings; automatically shuts system off at the end of the time setting
  • Fully-Enclosed Ball Bearing Motor with Overload Protection for long, dependable service
  • Rubber Feet prevent marring of surface when placed on workbench
  • Features a handy remote control that can be used to adjust the three speeds, timer and on/off
  • Quietly cleans and filters the air in your shop while you work. Filtering 98% of all particles 5 microns in size and 85% of all particles 1 micron in size. Use in conjunction with a JET dust collector for maximum dust control
  • Unit comes complete with eyebolts to either hang the machine from the ceiling or to sit on on a workbench
  • System features a convenient built in timer that can be set at 2, 4 or 8 hour increments. Turn the timer on when you enter the shop and forget about it. System will shut itself off at the hour interval you set
  • Constructed of a heavy-duty, powder coated metal box and powerful motor and fan for added durability
  • AFS-1000B Comes standard with an electrostatic filter that is electronically charged to attract many more dust particles than other standard filters
  • Has the capability of filtering the air in a 20' x 20' x 8' shop in under five minutes. It can filter the air in that shop over 12 times an hour
  • Two easy grip handles are inset into both sides for ease of movement
  • Filters are easily replaceable, no tools required.
  • The sealed inner three pocket filter fits inside and can be blown out or washed out if preferred
(1) Jet Air Filtration System
(1) Remote Control
(1) 3-Pocket Inner Filter
(1) Electrostatic Outer Filter
(4) Eyebolts for Hanging Unit
More Information
Brand Jet
Manufacturer Part Number 708620B
Weight 61.1500
Tech Spec
  • Model Number: AFS-1000B
  • Motor: 1/5 HP, 115V Only
  • Filter Cycle (20' x 20' x 8'): 4.92 minutes
  • Cycles per hour: 12.20
  • Timer Settings: 2, 4 or 8 hours
  • Outer Filter: 5 micron
  • Inner Filter: 1 micron
Speeds 3
Height 12-1/8"
Length 30-1/4"
Width 24-1/8"
Warranty 5 Year
Flow Rate 1044 CFM
HP 1/5 HP
4.7 / 5.0
184 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
137
38
5
3
1
Very pleased
It certainly takes the dust out of the air. I would definitely recommend it.
December 4, 2019
Purchased
1 month ago
Woodworking Experience:
Intermediate
Jet AFS-1000
I absolutely love this unit. I hung it from the ceiling on S-hooks. It is quiet and you can feel the air moving through it. I put it in my two car garage. No more dust on my wife's car!

Great buy!
November 18, 2019
Purchased
1 month ago
Woodworking Experience:
Intermediate
I would recommend it
October 14, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
Finally got a air filtration system to go with my dust collector should of done it years ago it hangs easily from the ceiling and it is quieter than I thought, it look good and it keeps the dust down in my shop.
October 9, 2019
Purchased
2 months ago
Woodworking Experience:
Intermediate
Awesome , terrific power
September 8, 2019
Purchased
3 months ago
Woodworking Experience:
Advanced
shop air cleaner
I built me a new wood shop outback of my home and wanted to have a air cleaner.My works wood shop had one of these jets and it work great. so i purchase one for my self.
August 20, 2019
Purchased
4 months ago
Woodworking Experience:
Intermediate
Great and reliable product
I purchased this a few months ago because my dad already had this model and he had no issues with it. It does exactly what it says and keeps the air in my shop clean. It's nice to be able to do woodworking and not have fine dust hovering in the air while I'm trying to work on my projects.
August 18, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Great product. The only negative is that it is a little noisy.
I am very pleased with the product. I have noticed that when even sanding the dust on surfaces in the shop is considerably less than in the past. The first unit I received was damaged during shipping and missing the instructions, remote and mounting accessories thanks to Gary at Rockler for getting a new unit shipped out immediately.
August 12, 2019
Purchased
5 months ago
Long overdue purchase
I purchased with plan to ceiling mount, but would hang too low. Made a roll around platform, and pull it out when needed. Even at this level it clears air quickly. Remote is nice feature. Very good build quality. Heavier than expected.
Roll Around for Air Filter
Roll Around for Air Filter
August 10, 2019
Purchased
5 months ago
Woodworking Experience:
Intermediate
Jet filtration unit
Very quiet,does the job of cleaning the wood dust from sanding and cutting wood on my various machines from the air. My only problem is the remote control mess up my TV set.
July 14, 2019
Purchased
6 months ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 38 questions Browse 38 questions and 128 answers
Why did you choose this?
Rockler Store
Needed one and competitive price.
Clinton W on Dec 12, 2019
Grandson wanted it for Christmas
Gale B on Dec 3, 2019
Needed one and competitive price.
Clinton W on Dec 12, 2019
We already have one of these installed in our shop but the room is too big for just one air handler and we have had no problems with the one installed so we ordered another just like it.
Roger H on Dec 9, 2019
Grandson wanted it for Christmas
Gale B on Dec 3, 2019
To counteract my wife who very gusty.
Michael Cowan C on Dec 3, 2019
I have Jet tools in my home shop and have been very happy with those so it made sense to get a Jet Air Filtration system with remote
Jerry H on Dec 3, 2019
reviews appeared to be very good!
Kim D. W on Dec 3, 2019
Shop gets dusty.
Dana P on Dec 3, 2019
Great reviews and excellent value!
Eric J on Dec 2, 2019
My husband wants this for Christmas.
Wanda M on Dec 2, 2019
I have a number of Jet tools in my workshop and have come to depend on Jet's quality. I need an air filtration system and the Jet system will suit my shop needs perfectly. The great sale price is also a plus.
Stephen L on Dec 1, 2019
Great deal
Robert E l on Nov 30, 2019
Did the research on air filters and this is a great price.
GARY B on Nov 30, 2019
GOOD REVIEWS. GREAT SALE PRICE.
Gordon C on Nov 30, 2019
Good price.
ROBERT O on Nov 30, 2019
Great price for a great brand
Robert W on Nov 29, 2019
I have owned this Jet air filtration system for over 10 years and it works wonders for keeping shop air clean.
Mackinnon Y on Nov 29, 2019
Based on ratings
Jay C on Nov 29, 2019
Setting up a new shop in basement
J D on Nov 29, 2019
good reviews good price
steve g on Nov 29, 2019
Great capacity and functionality - great deal.
Oakley S on Nov 29, 2019
good reviews, good price, needed for my small shop
Claudia S on Nov 29, 2019
Good deal
Quinn F on Nov 29, 2019
I chose this item because of the good sale price. Although I was charged $19.99 for shipping even though the add in a flyer I received stated free shipping. Never happy when I am mislead. Update: I did the online chat and was able to get the shipping charges removed. I appreciate the good service.
Leon F on Nov 29, 2019
My son-in-law needed it for his woodshop
Karen V on Nov 28, 2019
Heard it works great
Craig O on Nov 28, 2019
great deal!
Elizabeth H on Nov 28, 2019
The shop needed one and this was the right price.
Cody F on Nov 27, 2019
We have one and are very satisfied with its performance. Just need to add a second unit to handle the other end of our wood shop.
Roger H on Nov 27, 2019
Already own one and it works great.
Tim on Nov 27, 2019
Great deal for something I should have had in my shop years ago.
David W on Nov 27, 2019
Hoping to have better air quality in my garage
David D on Nov 27, 2019
Bought my first one from Rocklers in 2006, It is still working well. This one is for by best neighbors new shop.
RON D on Nov 27, 2019
Right product. Right price. Right time.
Dianna P on Nov 27, 2019
Replacing one I gave away
Paul S on Nov 26, 2019
I Read an article in a magazine that discussed the necessity of an air filtration system in a shop. The article rated the Jet system highly efficient. The sale helped my decision by making the system economical.
Andy C on Nov 26, 2019
Good reviews and a good value
keith l on Nov 26, 2019
Price, good reviews
Arvind S on Nov 26, 2019
Great reviews
James M on Nov 26, 2019
Jet has a good reputation and I am still setting up my work shop from a recent move
Richard N on Nov 26, 2019
Very good reviews by other buyers.
S T on Nov 13, 2019
I based my decision on the reviews of others and comparable products offered by other manufactures
Kevin B on Oct 26, 2019
Need good filtration in my shop.
Tommy V on Sep 16, 2019
excellent reviews online and JET has a good reputation
Rafael D on Aug 21, 2019
Highly rated, brand name company, reasonable price, good fit to my shop, free shipping
Edward Z on Aug 2, 2019
Jet filtration systems are the best and with free shipping through Rockler, the savings were enough to make me decide now was the right time to purchase it.
Leslie on Jun 4, 2019
long time standard
GARY W on Apr 26, 2019
seemed like a good ideal for a dusty shop.
Frank Stapleton C on Apr 18, 2019
Cleaner lungs!
Phil G on Apr 16, 2019
Dependability
Jeffery W on Apr 15, 2019
Replacing one that died . How do I get repair info on this unit ? Would like to get it back into service .
Tom F on Apr 14, 2019
We already have one of these installed in our shop but the room is too big for just one air handler and we have had no problems with the one installed so we ordered another just like it.
Roger H on Dec 9, 2019
To counteract my wife who very gusty.
Michael Cowan C on Dec 3, 2019
How to clean inner filter 708733?
David R on Jun 13, 2015
BEST ANSWER: According to the manual: “The inner filter can be pulled out of the unit after removing the outer filter. The inner filter can be blown out with compressed air.”
what is the maximum square footage this one will handle and should it be in the center of the room ?
A shopper on Jun 25, 2015
BEST ANSWER: My first shop was 30 x 40' and it worked very well. Now I use it in a standard 2 car garage primarily to keep dust down and not have things covered in dust after I saw/turn/etc. If you have questions Jet will be very helpful! I can't post the phone number but just Google it for the number. You will get lots of help. As far as mounting they suggested that I put it off center- not in the middle of the shop or garage. Hope this helps!
I work in a 60x40 barn with a 12 foot ceiling. However, I mainly only use the back 20x20 area for wood working. Would this filter be enough for that back area?
Steve P on May 4, 2015
BEST ANSWER: II think it would. my woodworking room is 12 by 24 with 9 foot ceiling. it clears the room out in about 5 minutes from a very dusty condition. it was easy to install I hung it from the ceiling. I haven't had it too long but I'm well satisfied with it so far
Does this unit plug into an outlet, or does it need to be hard wired by an electrician?
Dave H on Jun 10, 2015
BEST ANSWER: You can just plug it into a 110V receptacle
My shop is 30 x 40 with a 16' pitched ceiling, have 2 ceiling fans mounted at top of pitch , will this unit be big enough?
Dave S on Nov 28, 2015
BEST ANSWER: My shop is 30 x 30 with 10 foot high ceiling. I have placed the unit over my main work area and hung it so it is 7'6" from the floor and 4 feet from the side wall. It is also 12 ' from the end walls.. It seems to work well. I have notice a definite reduction of dust in the room..
How long is the electrical cord ?
Jonesy on Dec 2, 2015
BEST ANSWER: About 6'maybe 6'-6" haven't measured as the filter is mounted in the center of my garage close to the outlet for the garage door opener. Filter works great!
What is the maximum amperage draw when running?
TXCajun on Jan 11, 2018
BEST ANSWER: 4.5 A according to the manual.
I just received a jet 1000 cfm air filtration system and it shipped from the returns department. Is this where it ships from?
Shar D on Dec 10, 2019
BEST ANSWER: The return address is shown as Returns Department so that any packages returned by the shipper, or the customer, are delivered to the correct location at our warehouse. This does not indicate that the item contained in the package has been previously returned.
Do you have to hang from ceiling or can you sit on top of shelf unit?
Riverbum on Nov 12, 2016
BEST ANSWER: I have it hanging, but the intake and exhaust are on the front and back, so where the bottom is should not matter.
Would this unit work for a metal fab shop? Primarily for the gas fumes from welding and some metal powder from grinding and cutting?
63 Welds on Jan 16, 2016
BEST ANSWER: the directions that come with the unit specifically state, "for wood dust only". It works great for wood, in fact it on right now in my shop cleaning out walnut that i have been turning/sanding.
Will it work for keeping dust down in the house with forced air furance?
wayne W on Apr 9, 2018
BEST ANSWER: Hard to figure where you'd mount it that would work, not be unsightly and service the whole house unless there is a specific room you are concerned with. If it us just one room, sure, put in the right filter and go. Otherwise, speak to an HVAC contractor about a HEPA filter installed on the air return of your central furnace; assuming you have one.
Can this be incorporated into the sleeper berth of a commercial vehicle?
I'm looking for a solution to reduce silica dust in my truck.
SOAGT on Apr 1, 2017
BEST ANSWER: Don't know about that. It's 110 volt so you have to figure out how to get power to it. And some place to my it sold.
Can anyone confirm for me if the 2/4/8 hour timer settings can be selected from the panel's power on/off button? I can adjust the timer settings with the remote but it seems odd that the speed can be changed from panel buttons but then you have to go get the remote to set the timer. I'm wondering if mine has failed somehow.
David S on Feb 24, 2017
BEST ANSWER: Mine also works the way you described. My unit is mounted on a high ceiling so I have always used the remote. Consequently, I never noticed this oddity.
Can u leave it running all the time?
Marsha C on Jan 26, 2016
BEST ANSWER: I suppose that you can, not sure why that would be necessary. I have mine running while I am in my shop which at times is 8 hours or so. I usually set the timer to run for a period of time after I leave the shop!
Is this a good filter to use for staining?
Catherine on Dec 10, 2019
BEST ANSWER: My work shop is in the unfinished portion of my basement. It does great with collecting dust and I certainly do staining but I haven't really noticed any impact on staining. If you are thinking it reduces odor, I can't honestly say yes or no to that question. I do love my filter and I use the delayed shut off feature a lot. I usually set the time to shut off the filter two hours after I am done. I hope this gives you some help in deciding what to purchase.

Dave in Wisconsin
What is the cancer risk?
Sydney H on Nov 30, 2019
BEST ANSWER: I am not a doctor so heed caution with my advice. If you are putting material into the air that may cause cancer, you would have to be wearing a respirator. An air filtration system will not suffice. My employees wear masks even when using this device.
How many amps does this unit draw? It doesn't say anywhere in the specs or in the manuals linked for this product.
Joshua S on Nov 24, 2019
BEST ANSWER: The manual says the motor is rated at 1/5 HP, 115 V, 60HZ, 1PH, 4.5 A. Works fine on a 15 A circuit.
My shop is 20x30 with a very high ceiling. Will this unit work?
Rick E on Mar 11, 2019
BEST ANSWER: My shop is 20x50 with a9' 6" ceilings . I bought two of these units ,I put them in opposite corners of my shop to help the air circulation. It works great. Good to see very little to no dust. Terry K
Will this work in a 2 car garage with the door open or does it need to be in an enclosed environment?
Ryan B on Apr 16, 2018
BEST ANSWER: Ryan, I have a 24'x24' shop. no windows only walk in doors they are always closed. The Jet unit does a great job. it takes about 10 minutes of run time to really clear the air, I let mine run while I am in shop. Make sure to have extra outer filters on hand, and change then often. Hope this helps Rick
Is there a Hepa certified filter for this unit?
Jeffrey W on Feb 10, 2017
BEST ANSWER: Not that I am aware of. I go to Lowe's and buy 2 furnace filters that I tape over the air intake of my unit. It takes out all of the big chunks before it hits the regular filters. I then vacuum these filters with my shop vac after each day's use. I love it, especially with the shut off timers and variable speeds.
How long is the electric cord?
Bobby W on Sep 11, 2016
BEST ANSWER: think it's about 8 ft, I'm not at home right now so can't measure it.
I need a filtration system that will clean the air for a stone work studio. Will this be adiquite?
Sonya E on Apr 3, 2016
BEST ANSWER: I believe that it will. I have it in a room that is 12 by 24 and it cleans it up in no time.
How much electrical current does it take?
Richard on Feb 7, 2016
BEST ANSWER: Looks like 4.5 amps when running. Slightly higher on startup from inrush. I have it on a 20 amp breaker with a lot of other stuff. Works fine
how loud is this unit, compared to?
Nancy K on Oct 16, 2015
BEST ANSWER: Low speed is very quiet and I generally run it while doing hand tool work. On high it's louder but I'm usually running a sander so the noise isn't that notable from the air filter. I love my unit and use it in a 20 x 20 garage.
Can this unit be mounted on a wall rather than the ceiling (I have a rather high ceiling and it would be difficult for me access)?
Bob G on Aug 24, 2015
BEST ANSWER: Don't know about a wall but I also have a high ceiling in my basement shop (9ft+). I installed hooks in the ceiling joists, placed the Jet system on saw horses, ran chains from the hooks to the Jet system. Then, with a helper supporting the system from below, I mounted a ladder and pulled the unit up by the chains ( a little at each corner at a time) until it was suspended at the height I wanted. I had some excess chain which I removed with a bolt cutter. So far so good

Hope this helps.
Would this filtration system work in my garage with four dog kennels set up for four dogs max? I have Mitsubiti mini split air condition system. I have a dehumidafier running at 40%. Would your system work to get rid of dog dander etc and circulate the air?
Carol D on Jul 19, 2015
BEST ANSWER: It should work fine. I agree with Carol D. You should add a filter to pre-filter and save on the cost of replacing the Jet filter. You may also need to add some sort of pre-filter to your mini split to keep the fine dander and dust from infiltrating the standard filter.
Will the unit remove odors?
A shopper on Jul 18, 2015
BEST ANSWER: It does well removing paint fume odors. I don't know about other odors.
How many amps does this unit draw? It doesn't say anywhere in the specs or in the manuals linked for this product.
Joshua S on Nov 24, 2019
BEST ANSWER: I finally did a google image search and found where someone posted a photo of their units detail sticker/decal. It says it pulls 4.5/3.0/2.2 amps, depending on the speed setting of course.
Filter changes? Does the unit have a warning light for when filter needs cleaned/changed? How long does the main filter last? Can the pre-filter be cleaned?
Pa W on Nov 23, 2019
BEST ANSWER: No indicator light; however, I’ve found that visual inspection is a good indicator- I’ve had to change anywhere from a month to several months depending on what type of work or wood.
my jet air filtration (AFS-2000) worked good for several years, but now it will only run for a minute or two and then shuts down as if it gets hot. if you leave it off for a while it will then run for minute or two and then shut down again. is there some part of the electrical that can be replaced to fix this problem?
wayne B on Aug 9, 2019
BEST ANSWER: Something similar happen with mine. There should be a phone number in the manual that came with the air filtration that you can call for help. I had to get a new control board, which was very easy to switch out.
Prop 65 Warning WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product