$1,669.99 Each
Additional Shipping Charge: $85
Direct Ship

Jet® Bench Top Drum Sander

Item #
29284
Rating:
100% of 100
Jet® Bench Top Drum Sander
Jet® Bench Top Drum Sander
Features:
  • Sandsmart™ control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
  • Patented conveyor belt TRACKERS™ dramatically reduce the need for manual belt adjustments
  • Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage
  • Sealed and permanently lubricated drum ball bearings for longer life
  • Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results
  • Adjustable drum height and downward pressure feature virtually eliminates snipe
  • Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control
  • Patented abrasive take-up fasteners make changing abrasives quick and easy
  • Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute
  • On/off switch with overload protection is front-mounted for operator's convenience
  • One feed and one drive motor for superior sanding control
  • Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time
  • Our exclusive SandSmart™ infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload
  • There is an additional $85.00 shipping charge for this item.
  • Ships directly from the manufacturer.
  • Must be shipped within 48 Contiguous United States.
  • Estimated Delivery time: 15 business days.
  • 15% restocking fee on all returned merchandise.
  • Please call customer service before returning product.
(1) Jet® Bench Top Drum Sander
More Information
Brand Jet
Manufacturer Part Number 649003K
Weight N/A
Tech Spec N/A
Technical Documents
HP 1-3/4 HP
Sander Style Bench Top
Speed 1700 RPM
Dust Collection 4" Port
Volts 115
Cord/Cordless Corded
Max Width (inches) 44
Min Width (inches) N/A
Conveyor Motor 90DCV, 40 RPM, 0.45 A, 43 inch-lb. torque, direct drive D.C.
Minimum Thickness N/A
Maximum Thickness 4''
5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Although I've only used my 22-44...
Although I've only used my 22-44 a few times I think I can comment on it in a useful manner. It was easy to put together and adjust. It was pretty well adjusted from the factory with two exceptions. First the feed belt needed to be dialed in so it would stay in the center and the drum was not level with the feed belt. Both were easy to fix using the instruction manual. The belt slowed down by itself when I lowered the drum too much and it came out looking pretty good. Then I put it through again and it looked great. The feed rate is fast enough for my home workshop.
October 31, 2008
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
To sand a board that is larger than 22" I assume you have to rotate the board 180 degrees and do a second pass?
James N on Jul 20, 2017
BEST ANSWER: That is correct