$1,969.99 Each
Additional Shipping Charge: $95
Direct Ship

Jet® Drum Sander 1.75HP w/Closed Stand & Casters

Item #
Jet® Drum Sander 1.75HP w/Closed Stand & Casters
Jet® Drum Sander 1.75HP w/Closed Stand & Casters

This sander is one of the largest in it's class. You can sand up to 44" wide with better accuracy then any other sander in it's category.

  • Exclusive SandSmart™ infinitely variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload
  • Patented conveyor belt Trackers™ dramatically reduce the need for manual belt adjustment
  • Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat damage
  • Sealed and permanently lubricated drum ball bearings for longer life
  • Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results
  • Adjustable drum height and downward pressure feature virtually eliminate snipe
  • 1700 RPM drum speed
  • Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control
  • Patented abrasive take-up fasteners make changing abrasives quick and easy
  • Continuous-duty, 1-3/4 HP motor is designed for consistent power and long life
  • On/off switch with overload protection is front-mounted for operator convenience
  • One feed and one drive motor for superior sanding control
  • There is an additional $95.00 shipping charge for this item.
  • Ships directly from the manufacturer.
  • Must be shipped within 48 Contiguous United States.
  • Estimated Delivery time: 15 business days.
  • 15% restocking fee on all returned merchandise.
  • Please call customer service before returning product.
(1) Jet® Drum Sander 1.75HP w/Closed Stand & Casters
More Information
Brand Jet
Manufacturer Part Number 649005K
Weight N/A
Tech Spec N/A
Technical Documents
HP 1-3/4 HP
Sander Style Stationary
Speed 1700 RPM
Dust Collection 4" Port
Volts 115
Cord/Cordless Corded
Max Width (inches) 44
Min Width (inches) N/A
Conveyor Motor 43 inch-lb. torque, direct drive D.C.
Minimum Thickness N/A
Maximum Thickness 4
4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I got mine around May of...
I got mine around May of 2008, and to date have had no problems with it. I've run 3 or 4 hundred feet of oak (both red and white) through it with no problem at all. I use it primarily to surface and bring rough cut lumber to uniform thickness (rarely use my thickness planer anymore). I also use it to smooth out glued up panels.Changing the belts is quick and easy.
December 31, 2008
Overall this unit is ranked #1...
Overall this unit is ranked #1 in my book for Quality, Price and performance. It just does not get any better than this. Check the reviews on the competitors models Delta, Grizzly and so on and you will see why the 22-44 is the right machine for you as well. With the exception of a 20 minute assembly of the stand, conveyor and head this thing is ready to go out of the box. Unbelievable how quiet the 22-44 is. No burns and No snipes. Easy to adjust if even necessary. Save yourself a lot of time and money and just buy this one and you will be happy you did.
March 1, 2008
Received this unit in early August...
Received this unit in early August and everything arrived at one time. Went together very easily, but I did have help placing the drum assembly on the base. Word of caution, "Do not try to assemble this by yourself there is a good chance you'll either hurt yourself, the machine or both!" Only problem I've had with the unit thus far is an out-of-round conveyer belt. I did call JET and spoke with a very helpful gentleman that got me a replacement belt ASAP. Within three days the new belt was at my front door. Kudos to JET and their customer service folks! After installing the new conveyer belt, checking my drum to table alignment and hooking the unit up to my dust collection system, I was up and quietly running. To date, I have passed approximately 800 board feet of Maple, Walnut and some Bubinga. I know a number of people have stated that they have had some problems with installation of the sanding belts, but I have not. I start on the left side of the drum and finish on the right side without the use of the tool. I did practice changing the sanding belt during the time I was waiting on my new conveyer belt so that might be the reason. Practice does make perfect! I too agree that the infeed/outfeed sanding support tables should be part of the item, not sold individually as an option. I would also like to see a poly/rubber conveyer belt made for this unit too! I'm only giving this unit a four star rating because the conveyer belt was unserviceable and the infeed/outfeed sanding support tables were not included with the sander. I will give the JET Customer Service folks five stars. One last thing, "Buy the grit sandpaper you use the most on a roll and cut it to fit. You'll save yourself a lot of money that way."
October 16, 2008
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 2 answers
Why did you choose this?
Rockler Store
Quality and features
Ronald K on Mar 6, 2017
Quality and features
Ronald K on Mar 6, 2017
Could this be used on a Jet Drum Sander?
Bort on Jun 29, 2016
Jet® Drum Sander 1.75HP w/Closed Stand & Casters
Jet® Drum Sander 1.75HP w/Closed Stand & Casters
SuperMax ProScale® Digital Read Out Depth Gauge (DRO)
SuperMax ProScale® Digital Read Out Depth Gauge (DRO)
are the feed tables included?
Stephen T on Aug 19, 2015
BEST ANSWER: No the feed tables are not included even though they are installed in the picture. Rockler does not carry then and I had to order them from Acme tools. They are very easy to install.