$1,099.99 Each
Additional Shipping Charge: $115
Direct Ship
All the premium features of a higher end saw, at an affordable price point—13'' of resaw capacity for heavy-duty sawing!

Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity)

Item #
59267
Rating:
80% of 100
Its large, cast iron table features 360 square inches of work surface for excellent support, while the machined aluminum fence boasts accuracy and easy adjustability. The saw is equipped with Jet's tool-free blade guide system, which makes blade adjustments quick and simple. Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity) With all the premium features of a higher end saw, but at an affordable price point, the Jet 14'' SFX Steel Frame Bandsaw provides superior performance on nearly any project. Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity) Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity) Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity) Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity) Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity) Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity)
With all the premium features of a higher end saw, but at an affordable price point, the Jet 14'' SFX Steel Frame Bandsaw provides superior performance on nearly any project.

With all the premium features of a higher end saw, but at an affordable price point, the Jet 14'' SFX Steel Frame Bandsaw provides superior performance on nearly any project. Its large, cast iron table features 360 square inches of work surface for excellent support, while the machined aluminum fence boasts accuracy and easy adjustability. The saw is equipped with Jet's tool-free blade guide system, which makes blade adjustments quick and simple. The saw also features a generous 13'' of resaw capacity and accepts blades up to 1'' wide for heavy-duty sawing. Dual 4'' dust ports provide maximum dust collection efficiency, while the heavy-duty welded tubular steel construction and a total weight of over 300 lbs provide stability and durability when sawing large workpieces.


Features:

  • Deeper table with a massive 360 square inches of cast iron work surface for greater workpiece support
  • Over 13'' of resaw capacity for cutting large pieces of wood, slicing veneers, and cutting bookmatched panels
  • Heavy duty tubular steel welded construction with a total weight of over 300 lbs
  • Dual 4'' dust ports for maximum dust collection efficiency
  • Tool-less, independently adjustable, upper and lower ball bearing blade guides
  • Convenient 115V AC outlet location for optional accessories
  • Die-cast steel trunnion system allows for single point adjustments when moving table
  • Large machined aluminum fence surface with easily visible measurements for the most accurate cutting
  • Robust stamped steel doors with welded steel pin hinges for greater product durability
  • There is an additional $115 shipping fee.
  • Ships directly from the manufacturer
  • Must be shipped within 48 Contiguous United States
  • Estimated Delivery time: 7-14 business days
  • The delivery truck will need a lift gate if a loading dock is not available. There's no additional charge for this.
  • Items shipped by truck are to be delivered to curbside only
  • 20% restocking fee on all returned merchandise.
(1) 14'' Steel frame bandsaw
(1) Steel stand

(1) Table with insert pre-installed
(1) Dust chute
(1) Resaw fence
(4) Hex wrenches, 2.5/4/5/6mm (not shown)
(1) Operating Instructions and Parts Manual
(1) Hardware pack
More Information
Brand Jet
Manufacturer Part Number 714400K
Weight 325.0000
Tech Spec

Jet 714400K (JWBS-14SFX) Bandsaw: Motor and Electricals:

  • Motor Type: Totally-enclosed fan-cooled induction, capacitor run
  • Horsepower: 1.75 HP (1.3 kW)
  • Motor Phase: Single
  • Motor Voltage: 115/230 V (prewired 115 V)
  • Cycle: 60 Hz
  • Listed FLA (full load amps): 15 / 7.5A
  • Run Capacitor: 40μF 450VAC
  • Motor Speed: 1720 RPM
  • Starting Current: 63 / 34 A
  • Running Current (no load): 7.1 / 3.6 A
  • Power Transfer: V-belt
  • On/off Switch: Industrial-style push button
  • Power Cord and Plug: SJT 14AWGx3C, 6ft., 5-15P plug
  • Recommended Circuit Size: 15 A
  • Sound Emission without Load: 75 dB at 3 ft. (900mm) from blade


Capacities and Speeds:

  • Bandsaw Nominal Size: 14'' (355 mm)
  • Wheel Diameter: 14'' (355 mm)
  • Resaw Capacity (cutting height): 13'' (330 mm)
  • Throat Capacity: 13-1/2'' (345 mm)
  • Blade Length: 116-1/4'' (2953 mm)
  • Minimum Blade Width: 1/8'' (3.175 mm)
  • Maximum Blade Width: 1'' (25.5 mm)
  • Blade Speed: 15.24 m/s (3000 FPM)
  • Wheel Speed: 765 RPM


Main Materials:

  • Table: Ground cast iron
  • Table Insert: Anodized aluminum
  • Trunnion: Cast iron
  • Frame: Steel
  • Stand: Steel
  • Wheels: Cast iron
  • Tires: Polyurethane
  • Blade guides: Ball bearings, aluminum block
  • Resaw Fence: Extruded aluminum


Table, Fence, Miter Gauge and Dust Ports:

  • Table Dimensions L x W: 21-1/2 x 17'' (535 x 435 mm)
  • Table Tilt: 45° Right
  • Table Height from Floor: 40'' (1020 mm)
  • Miter T-Slot (2), W x D: 3/4'' x 13/32'' (19 x 10 mm)
  • Resaw Fence Size L x W x H: 18-1/4'' x 6'' (463 x 155 mm)
  • Miter Gauge Angle Range: 60° R and L
  • Dust Port Outside Diameter: 4'' (100mm) x 2
  • Minimum Extraction Volume Required: 400 CFM


Dimensions and Weights:

  • Overall Dimensions, Assembled L x W x H (approx.): 37'' x 27-1/2'' x 75-3/8'' (940 x 700 x 1915 mm)
  • Footprint L x W: 24-7/8'' x 17-3/4'' (630 x 450 mm)
  • Net Weight (approx.): 300 lbs. (135 kg)
Technical Documents Instruction Manual for Jet JWBS-14SFX 14'' Bandsaw (13'' Resaw Capacity)
4.0 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
1
0
0
2
best you can buy
nothing like a great tool. this is a lot more saw than the laguna 1412, more resaw capacity, bigger blade capacity, but still can throw a small blade on for delicate work.

love this saw, glad I waited for it. By far the nicest machine in my shop.
User submitted image
User submitted image
March 1, 2019
Woodworking Experience:
Intermediate
Awesome bandsaw for me.
Great bandsaw. I particularly like the working height And the dual dust control.
December 20, 2018
Purchased
5 months ago
The only complaint I had was the blade wasn’t centered with the table so I had to adjust the trunnion to center it. That only took a few minutes so it wasn’t a big deal.
User submitted image
Added Dec 17, 2018
December 17, 2018
Purchased
3 months ago
Woodworking Experience:
Advanced
This saw more than doubles my previous bandsaw resse capacity.I am very satisfied with it's performance
December 16, 2018
Purchased
3 months ago
Woodworking Experience:
Advanced
Jet bandsaw
I like the solid build and the resaw capacity of this saw. I also went with the Jet reputation.
December 15, 2018
Purchased
3 months ago
Woodworking Experience:
Intermediate
I purchased the bandsaw on Black Friday because of the Discount and free shipping. I received an email that it was back ordered until January, but received the saw about two weeks later. The base unit was damaged in shipping. After contacting Rockler they shipped a new base immediately. Very happy with Rockler support . So far I am very pleased with the performance of the saw.I had no problems assemblying or adjusting the saw during the setup.
December 14, 2018
Purchased
3 months ago
Woodworking Experience:
Intermediate
JWBS-14SFX Bandsaw
I purchased the 14SFX Bandsaw a week ago and overall I am pleased with the performance of the saw. However, I did have a few issues on set up with a cross threaded stop screw and missing washer on the upper rear guide bearing. This prevented the bearing from turning freely and created a grove in the bearing on startup. I found the adjusting of the lower guides was cumbersome and difficult to access. Being that is a brand new design the engineering could have been better. I would still recommend the saw and give the it 4 stars even with the miner issues. A big thanks to the staff at Rockler's in Burnsville as the were very helpful.

LOE.
September 30, 2018
Woodworking Experience:
Advanced
Great machine! (Or so I've heard)
Ordered on Frebruary 25th. Company says I should receive this sometime in April.
March 18, 2019
Purchased
3 weeks ago
Woodworking Experience:
Intermediate
Jet JWBS 14SFX 14" Bandsaw
I ordered the saw at the end of December and as of today it still had not shipped. I'm leaving town for three weeks, so I had to cancel the order. Rockler Customer Service was helpful with the cancellation, but I was pretty disappointed the saw did not come in the 7-14 day period. After 21+ days it had still not even shipped.
January 21, 2019
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 10 questions Browse 10 questions and 40 answers
Why did you choose this?
Rockler Store
Price for all the included options
Mark S on Mar 11, 2019
It's a good brand and I had one of them before , it's quality.
CHARLES B on Mar 7, 2019
Price for all the included options
Mark S on Mar 11, 2019
Resale capability and price
Alfredo G on Mar 7, 2019
It's a good brand and I had one of them before , it's quality.
CHARLES B on Mar 7, 2019
Price and shipping included and the saws capability
GLEN A on Mar 4, 2019
On sale
Roger B on Mar 4, 2019
I greatly needed to upgrade my band saw and I have been looking at this one for a while.
Carson H on Mar 4, 2019
Jet quality, sale price and free shipping.
Don B on Mar 1, 2019
I have had good luck with Jet products and the sale price was the kicker.
George M on Feb 28, 2019
Just what I was looking for.
With the $100 off and the free shipping, what's gonna stop you.
Anthony N on Feb 28, 2019
Good reviews on bandsaw
Gary F on Feb 27, 2019
Jet reliability
Len W on Feb 20, 2019
Available options and price
Stephen J on Feb 11, 2019
Cast iron trunion, table, and wheels; resaw capacity; resaw fence. Sale price and free shipping was an added bonus.
John V on Nov 24, 2018
Resaw capacity, and Jet reputation.
Case V on Nov 23, 2018
For the re-saw capacity.
David A on Nov 23, 2018
good value for the price
Sandy F on Nov 23, 2018
Black Friday sale. Free shipping. Whats not to love?
John K on Nov 23, 2018
I was looking for an entry level bandsaw with quality performance from a reputable company. After spending a great amount of time surfing the net, this item more than fit my needs.
Robert M on Nov 23, 2018
Black Friday sale and free shipping
Jay B on Nov 23, 2018
Black Friday sale
Tim on Nov 23, 2018
Resaw Capacity, Jet Reliability, Black Friday Sale.
Scott P on Nov 23, 2018
resaw capacity
Chuck on Aug 30, 2018
Resale capability and price
Alfredo G on Mar 7, 2019
Price and shipping included and the saws capability
GLEN A on Mar 4, 2019
What are the differences in this Jet model and similar Rikon and Laguna saws?
rkent on Oct 11, 2018
Does the stand have caster wheels?
jgarden6 on Aug 29, 2018
BEST ANSWER: It does not. You may want to consider one of the mobile bases available from Rockler.
Just purchased this saw and looking forward to using it. Does anyone know if there is a mobile base out there that fits this Bandsaw?
Hazy IPA on Oct 24, 2018
Can you put the fence right of the blade like the rikon 326?
James W W on Feb 12, 2019
BEST ANSWER: The fence can be easily moved to the right side by unscrewing the two black handles, sliding the fence off and switching the fence and screws to the opposite(right ) side of the blade.
What is the meaning of the term, "Resaw" ?
Robert M on Mar 5, 2019
BEST ANSWER: This model can cut something up to 13 inches wide (13 inches RESAW width), before the material being cut hits the body of the band saw. In the metal trades, we used to call it "Throat". I'm a retired Machinist, Jig and fixture builder, Aerospace tooling engineer, etc. I guess a lot of woodworking lingo is different. I looked this up on Wikipedia (under "band saw" and under the paragraph heading under Resaw) where it also explains it's use in making veneers. (stuff that's really thin). It can also cut material that is up to 14 inches tall. I hope this helps. Good Luck, Fern
What is base size and cut quality of blade. How smooth is cut with the 4TPI blade?
Pa W on Dec 30, 2018
BEST ANSWER: The base size is 18"by 25". The blade that comes with the saw is good. It produces a cut about what I would expect.. The cut usually requires a little sanding. I have not done any big resaw jobs yet.
Can the lower blade guides be adjusted without tools?
STEVE M on Feb 20, 2019
BEST ANSWER: You need to use hex keys to adjust both the top and bottom guides.
Rockler does not even stock blades for this saw?? They have been selling the saw for years but no blades? 116 1/4" does not seem common. Will this saw take 115" or what is its size range that will work properly?
scrapmaster on Dec 19, 2018
BEST ANSWER: While there is a little playroom in the adjustments, in speaking with Jet directly - they do call for 116" blade. I was also frustrated by this but was reassured reacently by a Rockler employee that they will be stocking them "soon". That said, you can order 116" blades from timber wolf blades dot com among a few others directly. Hope this helps.
I'm having trouble getting the blade to cut straight. wants to drift from right to left as I cut. is there an adjustment I'm missing?
jgarden6 on Jan 7, 2019