Kreg Pocket-Hole Jig K4
All the ease of pocket hole joinery with material from 1/2'' to 1-1/2'' thick. More details
-
$29.99 Each
With a sturdy toggle clamp to secure your stock to the jig, and a large frontal clamping recess for securing the jig to the bench, the Kreg Jig K4 gives you perfect alignment every time. Adjustable for 1/2'' to 1-1/2'' thick stock in 1/8'' incremental settings. A wood-chip relief hole for each drill guide keeps the drill bit clear of excess debris for one-plunge drilling. Secure to bench with Kreg multipurpose face clamps or any common bar clamp or C-clamp. Alternatively, the K4 can be screwed into a workbench or other surface.
Kreg K4 Details:
- 3-hole drill guide w/hardened steel core is adjustable for 1/2'' to 1-1/2'' stock thicknesses in 1/8'' increments
- Precision and adjustability in a time-tested pocket-hole jig trusted by DIYers and pros alike
- Easily adjustable for use with materials from 1/2'' to 1-1/2'' thick
- Industrial-grade toggle clamp offers incredible rigidity and an uncompromising hold
- Built-in guide for quick pocket-hole drill bit setup
- Durable, impact-resistant polymer construction
- Lifetime drill guide warranty
- Onboard storage keeps drill and driver bits close at hand
- Wood-chip relief holes keep the drill bit clear of excess debris
Kreg Pocket-Hole Jig K4
(1) Pocket-Hole Jig K4 with 3-hole guide
(1) 3/8'' stepped drill bit
(1) 6'' square-drive bit with depth collar
(1) Owner's manual
| Brand | Kreg |
|---|---|
| Manufacturer Part Number | K4 |
| Weight | 3.30 |
| Tech Spec |
|
| Unit of Measure | Each |
WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product 
