Special Price $1,619.10 Each Regular Price $1,799.00 Each
Direct Ship
3hp, 220v motor provides power, and pleated canister filter traps 99.97% of particles between 0.2 and 2 microns in size.

Maximum number of characters: 3

Maximum number of characters: 3

Laguna C|Flux 3hp 1-Micron Cyclone Dust Collector

Item #
55893
Rating:
88% of 100

The c|flux:3 is part of a series of Laguna cyclonic dust collectors that feature a horizontal chute designed to maximize airflow while improving the volume of air moved (measured in cubic feet per minute, or CFM). It comes with a high-frequency remote control, a 3hp, 220v motor that delivers as much as 2,817 CFM and a pleated canister filter made from 109 square feet of spun-bonded polyester. The filter provides maximum airflow and filters out 99.97% of particles between 0.2 and 2 microns in size. A handle attached to an internal flapper can be manually cranked 270° to dislodge dust from the filter.


An ingenious lift system quickly picks the 46-gal. drum up off the floor and seals it against the drum lid, avoiding the need for a flex hose. This design makes the unit more easily portable because the drum wheels don't contact the floor when the unit is moved. The drum lowers easily onto the wheels for emptying.

  • There is an additional $75.00 shipping charge for this item.
  • Ships directly from the manufacturer.
  • Must be shipped within 48 Contiguous United States.
  • Estimated Delivery time: 7-14 business days.
  • The carrier will need to know if delivery is to a residential address. There is no additional charge for this.
  • The delivery truck will need a lift gate if a loading dock is not available. There is no additional charge for this.
  • Items shipped by truck are to be delivered to curbside only.
  • 25% restocking fee on all returned merchandise.
  • Please call customer service before returning product.
With the Rockler Protection Plan, you'll get accidental damage coverage immediately upon purchase of your tool. Plus, we will extend the manufacturer's warranty for your choice of an additional 1 or 2 years. We'll take care of all parts and labor for any repairs, with no deductibles and no hassles. If your tool can not be repaired, we'll gladly replace it. Available in the US only. Click here to learn more. Standard Manufacturer's Warranty: 12 months, once registered in the first 30 days
(1) Laguna C|Flux 3hp 1-Micron Cyclone Dust Collector
More Information
Brand Laguna
Manufacturer Part Number mdccf32201
Weight 375.0000
Tech Spec
  • Motor HP: 3 HP
  • Phase: 1
  • Voltage: 220V
  • Amp. Motor Rating: 22 Amps
  • FLA: 20 amps
  • Hertz: 60
  • RPM: 3450
  • Main Switch: Magnetic starter/H.F.
  • Control Panel: Electrical Box
  • Remote Control: H.F.
  • CFM in shop-setting: 1624
  • CFM at Inlet: 2817
  • Max Static Pressure (inches of water): 11.2''
  • Impeller Diameter: 15.5''
  • Impeller Material: Steel
  • Impeller Type: Radial Fin
  • Inlet Manifold: 8'' Main 4'' x 3 ports
  • Drum Capacity: 46 Gal.
  • Secure Bag System: Metal Insert
  • Canister Filter type: 1 Micron
  • MERV Rating: 12
  • Shipping Weight: 375 lbs
  • Canister Diameter: 0400mm (15.75")
  • Canister Length: 900mm (35.43'')
  • Main Casters: 4" Diameter
  • Assembled Dimensions: 46'' L x 27'' W x 80'' H
  • Assembled Dimensions: 1178mm L x 690mm W x 2025mm H
Tech Docs N/A
Amps N/A
Sound Rating N/A
Volts N/A
Height N/A
Length N/A
Width N/A
Warranty N/A
Capacity N/A
Flow Rate N/A
Filter Type N/A
HP N/A
Prop 65 Warning WARNING: Cancer and Reproductive Harm. For more information go to www.P65Warnings.ca.gov/product
4.4 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
3
0
0
0
commentaire
Baptisé Robocup,
Vraiment une merveille cette machine et efficace.
Le désavantage est qu'il est très bruyant.
Est-ce qu'il y a des gens qui ont modifier pour atténuer le bruit??
User submitted image
Added Jun 11, 2017
June 11, 2017
Woodworking Experience:
Advanced
System works perfect
Have now owned my system for about six months, have almost zero dust collecting in the bag under my filter. The self cleaning feature is well worth the money, but you should go ahead and blow out the filter about once a month. The person that received the system that puts all the dust into the filter and filter bag must have a defective cyclone or motor wired backward.
December 6, 2016
Woodworking Experience:
Advanced
Good Value for Money
I purchased this machine about 6 months ago knowing it would be overkill for may 'quaint' 13 x 23 shop, however I am very glad I did. This machine is perfect for my small shop and the price was right compared to similar spec machines. I have a few issues with this machine that keep it from being a five star machine, but please understand that I am overall very pleased with my purchase, and would buy it again.

The vacuum performance is everything I hoped for. This machine easily keeps up with my 20 inch planer taking a heavy cut through my 6 inch duct work. There is so much suction that I can't even open the bottom door to my band saw when this machine is on! Absolutely no complaints in this department, which is why I think this machine is such good value. A+

The separation and filtration are less impressive but still adequate. It take about 6-7 barrels full of dust to fill the plastic bag below the filter mostly full. I hoped for more but I can deal with this. Also, filtration is lacking a bit because I can see dust coming out of the filter when I use my the filter cleaning handle. I again can deal with this because by buying this machine you are opting out of the HEPA filter option. I give the machine a B in this department.

The instructions are good for laughing at, but thats about it. They are horrible in every way from telling which screw to use, to telling you to put things together that were done at the factory. I also had a part left over that was not even mentioned in the parts list of the manual. After researching it, this piece was an air deflector for just above the barrel but this should have been in the manual obviously. Laguna's saving grace here was the videos they produced online that walk through the assembly, but even they are flawed. In all assembly took 5 hours, but I was able to complete the process without calling customer service. C-

Fit and finish is almost flawless. The one glaring flaw in the slaw is the on off button which works... most of the time. I have had a few instances where the machine would not turn off when I was pushing hard on the button. I had to track down the remote which works perfectly to turn the machine off. Good remote, bad buttons. I think its fair to call this a safety hazard. A- for fit and finish.

As previously stated, I am very happy overall with this machine, but I wanted to address every flaw in case this is a deal breaker for anyone. For me, this machine is incredible value for money and I would happily purchase it again.
March 18, 2018
Woodworking Experience:
Intermediate
Good product the best I can tell. i do not use it everyday.
Went together well good fit and finish. Lots of power would like to have larger trash receptacle. But overall please with the product so far.
January 25, 2018
Purchased
8 months ago
Woodworking Experience:
Intermediate
Really great products I went from a jet one and a half horsepower to this CFN power is much better. Only downside incredibly loud
Really great products I went from a jet one and a half horsepower to this CFN power is much better. Only downside incredibly loud
October 1, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 9 answers
Why did you choose this?
Rockler Store
Ratings
Sean K on Jan 25, 2018
careful study of features, this looks best
Mark C on May 23, 2017
Ratings
Sean K on Jan 25, 2018
GOOD REVIEWS
T-C M on Jan 16, 2018
careful study of features, this looks best
Mark C on May 23, 2017
Because of the reviews I have read and price.
Errol H on Mar 17, 2017
GOOD REVIEWS
T-C M on Jan 16, 2018
Because of the reviews I have read and price.
Errol H on Mar 17, 2017
Is there a way to get a hold of extra remote controls?
Ryan D on Sep 30, 2016
BEST ANSWER: I have a CfluxII and asked the company about extra remotes. The collector can only accept the programming of one remote at a time. They will sell you additional remotes but you cannot program more than one at a time.
Can the filter canister on the bottom of the P/Flux filter be used on the bottom of the C/Flux instead of the plastic bag? If so, how can you purchase?
Carmen on Apr 7, 2018
BEST ANSWER: I wouldn't think so because the height is a lot different. Also the plastic bag doesn't hardly get any sawdust in it so I don't worry about it but that would be up to you.
The inlet is 8". Does Rockler sell an adapter to go from the 8" to a 6" PVC?
T. S. on May 14, 2017
BEST ANSWER: the inlet for this is 8" but it is covered a panel that has two 4" openings. We do not have an adapter that goes down to 6" PVC
What is the DB rating?
doogie on Dec 20, 2016
BEST ANSWER: This is definitely a machine that requires hearing protection. I own this machine and it is not really the volume that you notice, it is the higher than normal pitch (like an air raid siren) that is bothersome. Not this machines strong point but really, I have not encountered a quiet mini cyclone to this day.
Where is this made??
Adam F on Jan 29, 2018
BEST ANSWER: Taiwan