Store Locator
Special Price $135.00 Each $150.00 Each
Direct Ship
Ships directly from the manufacturer.
Must be shipped within the 48 Contiguous United States.
Estimated Delivery time: 7-14 business days.
Please call customer service before returning product.
QTY

Get Expert Advice

Return Policy

Laguna Dual-Arm Pro Light with 110V Transformer

Add bright, even task lighting to your Laguna 14/12 bandsaw, 14BX bandsaw (110 volt version) or Revo 18/36 lathe.
Item #
50514
Rating:
74% of 100

This halogen worklight is designed for use with the Laguna 14/12 bandsaw, 14|BX bandsaw (110 volt version) and Revo 18/36 lathe. It is fully adjustable and floods the table with bright, low-glare light for better visibility and safety. It features a separate on/off switch so it can be used while the saw is off. Durable construction with a ribbed aluminum case.


Features:

  • Long articulating arm with three adjustment points so you can direct the light wherever it is needed
  • Independent on/off switch provides lighting even if the saw is off
  • Features a durable ribbed aluminum case
  • High-intensity halogen light enhances safety and visibility
  • Low glare for even light distribution
  • Dust-proof design
(1) Laguna Dual-Arm Pro Light with 110V Transformer
More Information
Brand Laguna
Manufacturer Part Number ALAREVO18 LIGHT
Tech Spec
  • Voltage: 110V
  • Bulb Wattage: 50W
  • Bulb Type: Halostar 50W 12V GY6.35 with pin base
  • Compatible Tools (no drilling required): 14/12 bandsaw, 14|BX bandsaw (110V), Revo 18/36 lathe
3.7 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
2
1
0
Great light, but wish it was LED instead of halogen.
February 12, 2020
Purchased
2 months ago
Woodworking Experience:
Advanced
Does exactly what it is suppose to do
October 13, 2019
Purchased
1 year ago
Woodworking Experience:
Advanced
Puts a good light. Able to adjust to avoid shadow on work piece, but not easy to adjust.
March 23, 2020
Purchased
11 months ago
Woodworking Experience:
Intermediate
Laguna Duel-Arm Pro Lights
Not as bright as I expected but the placement and mounting of two lights on the lathe is very good. Much better than the magnet based light on my previous lathe. The light was brighter but required moving often.
September 8, 2019
Purchased
7 months ago
Woodworking Experience:
Advanced
Nicely made. Not LED.
This light is well made, as it should be for the husky price. What's baffling is that it uses and incandescent bulb. What's with that? This is the twenty first century.
June 26, 2019
Purchased
10 months ago
Woodworking Experience:
Advanced
Laguna Dual Arm Pro Light with 110V transformer
I just purchased the Laguna Dual-Arm Pro Light with 110V Transformer for my 14BX bandsaw. I rate the design and installation maybe a “C” for the following reasons:
•Halogen vs. LED light; for the same output, there’s more light output with an LED
•Installation is difficult for any person with average size hands. A second person is needed to hold the light in place while the other person is trying to affix the washer and nut. A better solution is tap the holes for the screws or weld a nut on the inside. Also if the above is not done, provide a self-locking nut that will resist vibration.
•The most disappointing feature is the power supply source. On the bandsaw there is a 220 VAC outlet located on the column. The light is 120 VAC, so obviously the outlet on the column cannot be used. So, an extension cord will probably be needed to supply power.
oA suggestion: make the plug on the column a 120 VAC power source, or provide a 220 VAC to 120 VAC plug converter.
•Even if the above items were not a factor, the light is overpriced.
October 11, 2019
Purchased
5 months ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 8 answers
Why did you choose this?
Rockler Store
Dual articulation in the arm allows light to be put right on blade cut area, I hope.
michael k on Jan 25, 2020
The reviews said that the lights are a must.
Mark A on Nov 30, 2019
Dual articulation in the arm allows light to be put right on blade cut area, I hope.
michael k on Jan 25, 2020
It will help light work on the bandsaw.
Janelle W on Dec 3, 2019
The reviews said that the lights are a must.
Mark A on Nov 30, 2019
YOU NEVER HAVE ENOUGH LIGHT AND THIS LIGHT WAS JUST THE RIGHT FIT FOR THE LAGUNA LATHE.
DELBERT B on Oct 21, 2019
Goes with lathe. Can't have too much light.
Old Washoe Varmint on Apr 30, 2019
Already own and like this style light system. Also not a LED light source.<br /><br />As we all know those LED lights are really secret hidden cameras with audio sending all back to the Russians???<br /><br />Rick B
onevw on Jan 1, 2019
It will help light work on the bandsaw.
Janelle W on Dec 3, 2019
YOU NEVER HAVE ENOUGH LIGHT AND THIS LIGHT WAS JUST THE RIGHT FIT FOR THE LAGUNA LATHE.
DELBERT B on Oct 21, 2019
Will this mount on the laguna 1216 lathe?
Kurt W on Jan 29, 2020
BEST ANSWER: yes....as you can see on the Laguna website...A single
lite is installed on the headstock.
It is a single lite only...
FYI
For most info needed for when buying tools
go to the makers of the tools website......