Lathe Chuck and Tapers
1/2"drill chuck for lathe and two choices of morse tapers (sold separately). Use this drill chuck and either the #1 Morse taper or #2 Morse taper listed to assemble as shown. Key is supplied with chuck. Both #20777 and either #20785 or #20793 need to be ordered to complete assembly as shown. This assembly is used on a lathe to hold a mandrel for turning wood pens and pencils.Notice: Chuck shown with a Morse Taper installed.
- Cancer & Reproductive Harm - www.P65Warnings.ca.gov
- Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.