$39.99 Each
Out of stock

Leg Up Table Saw Panel-Lifter

Item #
47629
Rating:
86% of 100
Leg Up Table Saw Panel-Lifter Leg Up Table Saw Panel-Lifter Leg Up Table Saw Panel-Lifter Leg Up Table Saw Attachment
Leg Up Table Saw Panel-Lifter

Save wear and tear on your back from lifting heavy sheet goods with the innovative, labor-saving Leg Up Table Saw Panel-Lifter! Easily mounts to your table allowing you to raise sheet goods onto your table saw. Simply place any sheet of wood into the hook and, in one controlled motion, flip the sheet onto your table saw. In one easy motion you're ready to cut large sheet goods on your own, safely and easily, without the aid of another person. Rugged steel construction with a powder coating to prevent rust.


Features:
  • Saves wear and tear on your back from lifting heavy sheet goods
  • Easily mounts to your table
  • Raise sheet goods onto your table saw by yourself
  • Makes it possible to cut large sheet goods on your own, safely and easily
  • Rugged steel construction with a powder coating to prevent rust
(1) Leg Up Table Saw Panel-Lifter
More Information
Manufacturer Part Number 58008
Weight 2.9300
Tech Spec
  • Weight Capacity: 120 lbs
  • Made in the USA
4.3 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
1
1
1
0
Terrific Option if You Work Alone!
Works great! Very nice addition to make handling sheet goods easier!
March 14, 2019
Purchased
1 year ago
Woodworking Experience:
Advanced
Leg up panel lift
Looks like it will work on my powermatic saw
Have not had a chance to use it yet
In the evolving shop stage again
May 5, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
The tool will help save your back that way you only got a lift up half of the sheet of plywood instead of the whole thing it works great once it's up at slide right on the table saw and you go back tomorrow away
August 25, 2016
Purchased
over 4 years ago
Woodworking Experience:
Advanced
Works well!
It took a short while to learn not to trip on it - just stay an inch or two out when walking past the saw. It works well for cutting full sheets length wise, makes it much easier. well worth the money since I am not as young as I was.
July 24, 2015
Purchased
over 3 years ago
Woodworking Experience:
Advanced
I'm 66 and have a bad...
I'm 66 and have a bad back. I can still handle moving 3/4" 4X8 sheets of Oak plywood. This item has allowed me to be able to lift and cut full sheets by myself without any problems. I do custom work and cannot have a scrape or scar on any part of a sheet. This is the best money I have spent in my shop in 20 years. Do yourself a favor and try it out.
March 24, 2013
I wish I would have had...
I wish I would have had this years ago. Very easy for one man to lift a 3/4 inch sheet of plywood onto the tablesaw. Also makes the the process alot safer.
January 4, 2012
Works as advertised
Was very easy to install. Works as advertised. Don't have to
struggle with full sheets of plywood. It did seem to be in the way
when not being used as that side of saw I walk around. I ended up removing it until I need it again, can reinstall in seconds.
May 12, 2015
Purchased
over 4 years ago
Woodworking Experience:
Advanced
The weld broke and I had to repair it. It's ok it does work.
October 21, 2016
Purchased
over 4 years ago
Woodworking Experience:
Advanced
Such a simple design, even a caveman can install it?
Very good materials. Instructions are FAR LESS THAN HELPFUL. Looks easy to install. Well, it is easy to get it wrong. I'm sure for certain saws it fits and works good. Not so with my pricey cabinet table saw with extended fence rails.
July 27, 2015
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 7 answers
Why did you choose this?
Rockler Store
I'm getting older.
carado on May 24, 2017
Work alone most of the time
Mark L on May 28, 2016
I'm getting older.
carado on May 24, 2017
works for me
Architectural G on Oct 12, 2016
Work alone most of the time
Mark L on May 28, 2016
It really works and is a great help in getting 3/4 full sheets on the saw SAFELY
Floyd F on Feb 3, 2016
Good for one man operation
Richard the Mold guy on Jan 18, 2016
Easier for Tom
Jodi Lou B on Dec 11, 2015
Easiest way for one person to handle large sheets of material.
Terrence D on Nov 26, 2015
Hurt my back.
Rscott on Nov 25, 2015
To help husband when he's working alone in shop
Barbara M on Nov 14, 2015
Help to cut full sheets of plywood
RUSSELL J on Oct 15, 2015
helps me get large sheet goods up on the table saw
Ryan O on Sep 28, 2015
I work alone
TOM S on Sep 13, 2015
Since I work alone normally I am hoping this makes it easier to cut large sheets of plywood
Robert M on Jul 10, 2015
I am a 1 man shop.
Allan F on Jun 3, 2015
Clever and useful
Dennis D on Jun 3, 2015
Handling full sheet goods is hard on ones back
Daniel V on May 10, 2015
I saw the online advertisement and appears th offer improved safety when handling panels on a table saw.
Thomas W on May 6, 2015
because I'm not able to lift a full panel alone
Marian T on May 3, 2015
many times in shop by myself, 3/4 plywood is heavy
Sharon G on Apr 29, 2015
works for me
Architectural G on Oct 12, 2016
It really works and is a great help in getting 3/4 full sheets on the saw SAFELY
Floyd F on Feb 3, 2016
Will this product readily fit onto at SawStop Professional Table Saw? It appears to be rather useful.
A shopper on May 3, 2015
BEST ANSWER: Yes this will fit on the SawStop pro table saw
I have a Ridgid 4510 table saw and would have to mount on the vertical surface of the table extension - anyone had success with this install method?
Robert G on Apr 1, 2016
BEST ANSWER: Robert,
I mounted the Leg Up to a Grizzly Table Saw on the vertical side with no problem at all. It works very well. At 72 lifting Oak Veneered 4X8 Sheets of plywood becomes a lot easier with this device.
Will this fit on a Bosch TS3000 Gravity Lift table saw?
Bev L on Mar 8, 2016
BEST ANSWER: I don't believe it will without it getting in the way of the tool. This is designed with a casted, larger shop style saw in mind. The top of the Bosch is quite small and when pulling the sheet goods up, a full sheet is more than likely to cover the entire saw itself and even reach past the fence. Which makes this tool useless on a job site style table saw. Hope this helps.
Will it fit a a round fence rail like the Vega Pro 50?
Dan R on Aug 25, 2016
BEST ANSWER: The opening on the the tool is only for my half to three quarters of an inch so I don't know how big your round pipe is but it would definitely fit
Can it attach to a incra jointery system?
steve p on Jan 23, 2018
More Suggestions