$17.99 Each
Out of stock
A sleek touch-sensitive dimmer switch—compatible with all Loox LED lights and drivers.

Loox LED Dimmer Switch

Item #
56850
Rating:
84% of 100
Loox LED Dimmer Switch
Loox LED Dimmer Switch

This switch provides easy one-touch dimming for all Hafele Loox LED lights (available separately). One tap on the sensor turns the lights on or off, while holding your finger over the sensor adjusts the brightness. Compact size can be located nearly anywhere—ideal when you want the switch to be hidden.

  • 0-100% dimming control for optimal accent lighting
  • Touch sensor to turn lights on or off
  • Hold finger on sensor to dim to desired level
  • Surface-mount installation
  • Compatible with all Hafele Loox LED lights and drivers
(1) Loox LED Dimmer Switch with Attached 78'' Cable
(1) Mounting Bracket
More Information
Brand Loox
Manufacturer Part Number 498.52.998
Weight 0.3000
Tech Spec
  • Contact rating (W): 0.3-30
  • Length: 2-3/8''
  • Diameter: 1/2''
Outlet No
Compatibility Hafele, Loox
4.2 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
2
1
0
0
good switch
Good switch. The only negative is that the whole is for 13 mm rather than 1/2 inch, which makes getting it right a bit tricky for those of us without metric drill bits. Functions very well - cool!
August 27, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Instructions for Dimmer Switch
The dimmer switch works fine. The instructions are minimal and mostly picture instructions. I spent time experimenting and eventually it works as expected.

The instructions are printed in many languages, so there is a lot of paper but not much clear information.
August 21, 2016
Purchased
over 2 years ago
Woodworking Experience:
Advanced
Works good with some modifications
Used this with the 22" bar light kit...was unable to use the bracket came with as it would require it to be seen on side of cabinet inside where I mounted switch...drilled hole through bottom of cabinet so it is not visible...just easy to reach under cabinet ...like that it just takes light touch to go on and off and then dims...very happy...
March 21, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Works well, some creativity needed for locating its placement
I installed a Loox dimmer switch in my remodel of a dish cabinet and it works well, but was a bit challenging to locate the item in a convenient, but not distractive spot. The switch shines a blue led at the end which I did not want to see on the outside of the cabinet, so I mounted it in a drawer with enough cord held out of the way to allow the drawer to operate without binding on the cord. I'm very happy with the result.
January 20, 2016
Purchased
over 3 years ago
Woodworking Experience:
Intermediate
Okay but not perfect
Bought the Loox 24V LED lighting system for my built-in cabinet/bookcase project. There was limited info -- and that is an understatement-- available on how the switch functioned. I opted to bore a hole and place the switch in an out-of-sight area on the bookcase. The power supply is plugged into a switched outlet. My intent was to have the lights on/off controlled by the wall switch, and then use the dimmer switch if I wanted to vary the intensity. But that is not how it works. If you turn the lights OFF using the wall switch, to get the lights back on you need to flip the wall switch ON, then go to the dimmer switch and tap it to restore power to the lights. The lights will then turn ON at full bright, regardless of the intensity at shutdown. The switch itself can be finnicky to operate. All it takes is a quick tap to turn ON/OFF. When varying the intensity, there is a slight delay (1-2 seconds) before you see the results. It's just long enough to make you start thinking it isn't working properly.

Would I buy again? Probably because it is the only option with Loox. I wish Loox would have someone not familar with their products construct their web site. That might result in more useful info being available to the consumer.
Dimmer installed in cabinet side.
Dimmer installed in cabinet side.
June 30, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 11 answers
Why did you choose this?
Rockler Store
have undercounter lights needed a new switch one sent with kit didn't work this one works but not very well
Tom M on Oct 24, 2015
have undercounter lights needed a new switch one sent with kit didn't work this one works but not very well
Tom M on Oct 24, 2015
Regarding the Loox LED Dimmer Switch, Item #56850 - Two part question:
1) Press & hold touch control to adjust brightness, if you turn off and back on does it remember the setting or do you need to repeat the adjustment every time?
2) Instead of using the "touch button", can the dimmer be directly connected to a hinge on the cabinet door?

Loox LED Dimmer Switch
Tom S on Jun 14, 2016
BEST ANSWER: 1) Yes, the switch remembers what level of brightness it is on when you turn it off and on
2) I do not see a way of connecting this particular switch to a hinge or part of the door to automatically turn on and off. There are other switches that do that, but not this one
Hi, will this work with the 12V Loox system?
steph f on Mar 8, 2016
BEST ANSWER: Yes - I installed it on my Loox 12 v system
can I mount the Loox LED Dimmer Switch #56850 through a wood panel, without the mounting bracket? Will it work with other brands of LED lights/drivers?
Bill D on Jan 14, 2016
BEST ANSWER: I didn't use bracket..drilled through bottom of cabinet on side and added a washer to slide switch through so stays neatly on outside of cabinet
More Suggestions