In stock
Grouped product items
Product Name Price Qty
7/32" Hole Maple Axles
7/32" Hole Maple Axles Item #: 21691
In stock
$1.49
Pack
  • Buy 10 for $1.34 each and save 10%
11/32" Hole Maple Axles
11/32" Hole Maple Axles Item #: 21725
In stock
$1.99
Pack
  • Buy 10 for $1.79 each and save 10%
11/32" Hole Maple Axles
11/32" Hole Maple Axles Item #: 75929
In stock
Special Price $1.99 Regular Price $2.99
Pack

Maple Axles - 4 Packs

Item #
GRP1540
Rating:
90% of 100
Maple Axles - 4 Packs
Maple Axles - 4 Packs

Maple Axles for the wheels that are perfectly sanded and ready to finish.

(4) Maple Axles
More Information
Weight 0.0200
Tech Spec 7/32" Hole Maple Axles, Item #21691
  • Shaft Diameter: 7/32"
  • Cap Diameter: 3/8"
  • Shaft Length: 1-1/16"
  • Overall Length: 1-1/4"

11/32" Hole Maple Axles, Item #21725
  • Shaft Diameter: 11/32"
  • Cap Diameter: 1/2"
  • Shaft Length: 1-3/8"
  • Overall Length: 1-5/8"

11/32" Hole Maple Axles, Item #75929
  • Shaft Diameter: 11/32"
  • Cap Diameter: 1/2"
  • Shaft Length: 2-3/8"
  • Overall Length: 2-5/8"
Technical Documents
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.5 / 5.0
15 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
11
1
2
1
0
Necklace Chains
Used the maple axles to hang necklace chains.
Used the maple axles to hang necklace chains.
Used the maple axles to hang necklace chains.
April 10, 2018
Purchased
1 year ago
Woodworking Experience:
Beginner
None
Worked fine
January 6, 2018
Purchased
1 year ago
Woodworking Experience:
Intermediate
maple axles
I live where there isn't a Rockler store so now I must order over the internet. I'm very happy with the service that I received .Oh and I love the axles ,It helps me make wooden toy trucks .
December 25, 2016
Purchased
over 2 years ago
Woodworking Experience:
Intermediate
toy train
used on toy train and they worked great
March 16, 2016
Purchased
over 3 years ago
Alernative Use
I'm very pleased with is product. All pieces were made well and had uniform dimensions. I used them to make a Plinko Game board. The axles were used as game board pegs.
September 29, 2015
Purchased
over 3 years ago
I've read the complaints about them...
I've read the complaints about them being oversized, but I see that as a bonus. I've always followed the suggestion of wooden toy maker David Wakefield and crimped them with a pair of pliers rather than sanding them. This reduces the diameter just enough to allow easy insertion and provides channels for the glue. Works like a champ!
December 24, 2012
I was very satisfied with this...
I was very satisfied with this product.
October 27, 2009
I use quite a few of...
I use quite a few of the 7/32" size. They are very nice. The only problem I've found is they are usually at nominal diameter or sometimes even a little larger, so they don't fit readily into a 7/32" hole. I've sanded the shanks down sometimes, as others have suggested, but it's easy to get a tapered axle and a sloppy fit that way. The best way I've found to provide clearance when the axle doesn't fit a 7/32" hole is to use a #2 bit. The diameter is nominally 0.221", a couple mils over a nominal 7/32" axle. /p>
October 2, 2012
I have been ordering this product...
I have been ordering this product for several years. 50 Packages at a time, and have found that, while good, over half of them are over size and need extensive sanding in order to fit.
September 13, 2009
I ordered some of each size...
I ordered some of each size and found that about half of each size had to be sanded down to the final size of 7/32 and 11/32. Otherwise, I am pretty satisified with the products.
December 6, 2008
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Why did you choose this?
Rockler Store
I'm making an expandable oak hot plate.
Georgia O on Dec 15, 2017
price
Billy S on Feb 16, 2017
I'm making an expandable oak hot plate.
Georgia O on Dec 15, 2017
I use them in toys that I make
Edward G on Oct 1, 2017
price
Billy S on Feb 16, 2017
Have used before.
Mark on Feb 9, 2017
great price and it's better than turning them yourself.
Robbe C on Dec 26, 2016
making a car for grandson, needed axles for wheels
richard k on Nov 14, 2016
I'm making a toy train
Doug I on May 22, 2016
Just what I was looking for.
Everett M. on May 1, 2016
He builds cars for the grands kids and with them .The boys love working in granddads work shop. They are 10 and 8 years old.They are just the right size for making cars or trucks.
KATHLEEN L on Dec 2, 2015
To be used with the 1-1/4" wheels.
Mark R on Dec 1, 2015
Christmas projects
Max G on Nov 27, 2015
Work good for toys
Robert P on Nov 22, 2015
Perfect for the wooden toy I am making
Clark G on Nov 3, 2015
Woden train project
Gregory P on Aug 26, 2015
To make train for great grandson
Judith on Aug 25, 2015
they make great toys for my grand sons
Brent P on Aug 3, 2015
Shop inventory
James S on Jun 29, 2015
Toy project
Fredrick D on Jun 14, 2015
Completed my material needs for a soecial wood toy project
DON S on Jun 7, 2015
I am building train
William S on Apr 21, 2015
I use them in toys that I make
Edward G on Oct 1, 2017
Have used before.
Mark on Feb 9, 2017
How many in a pack?
A shopper on Sep 1, 2015
BEST ANSWER: 4