$34.99 Set
In stock

Micro Jig ZeroPlay™ Guide Bar System

Item #
30614
Rating:
86% of 100
Micro Jig ZeroPlay™ Guide Bar System Micro Jig ZeroPlay™ Guide Bar System
Micro Jig ZeroPlay™ Guide Bar System

Each guide bar is composed of two interlocking plastic bars that adjust laterally to the exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay™ stops and assembly hardware as well as plans to build a table saw crosscutting jig with off cut deflector, jointing fence alignment jig for the router table, and hold-down clamps made from scrap materials.

(1) Micro Jig ZeroPlay™ Guide Bar System
More Information
Brand Micro Jig
Manufacturer Part Number ZP9-B2S2
Weight 0.6000
Tech Spec
  • Custom fits standard 3/4” x 3/8”, ShopSmith and General miter slots
  • Slot Width Range: 0.730” - 0.790” (18.54mm—20mm)
  • Slot Depth: minimum 5/16” (7.94mm)
Technical Documents
Prop 65 Warning WARNING This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/product
4.3 / 5.0
15 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
5
0
2
0
Happy with product
I temporary replace for my crosscut sled on my DEWALT table saw instead peace of junk cut out from stud , soft wood change size depend on weather season
User submitted image
Micro jic miter bar
September 2, 2018
Purchased
2 months ago
Woodworking Experience:
Beginner
slides for jigs
These fit my Laguna Fusion 2 perfectly! Nice movement with no play from side to side.
January 8, 2018
Purchased
9 months ago
Woodworking Experience:
Beginner
Absolutely the best
I used 2 of them to build my crosscut sled. Works perfectly!
November 28, 2017
Woodworking Experience:
Advanced
Micro Jig ZeroPlay™ Guide Bar System
A very good system but I sure wish they were about 3 or 4 inches longer. The miter stop is quite useful for many applications where the miter bar is not even used (like in jigs, feather boards or when making stopped dados or dove tails...I use it to stop the forward motion of my box joint jig).
July 12, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
They got it right
Simply works wells
February 25, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
As easy as advertised
Even though it needed a couple go arounds to make sure the fit was snug (or loose enough), I was able to use only one of these for a cross cut sled. Using the other for another jig soon.

The locking bits that are used for calibration can also then be used for hold-downs or other shop-made jigs, which is super handy that I don't just have to throw them out now.
March 6, 2016
I purchased the 2-bar "Guide Bar...
I purchased the 2-bar "Guide Bar System" and two individual bars to make two different jigs for my table saw: a 45° sled for making picture frames and a jig for making cuts on the mitered corners of small boxes into which reinforcing/decorative splines are glued, and then, of course, trimmed and finished.The bars must be installed carefully, as per included instructions. They function exceptionally well and took much less time to install than it did to make and install hardwood slides on a 90°crosscut sled I built. I'll most certainly buy more with which to make future jigs.
February 12, 2011
I used 2 pair of your...
I used 2 pair of your zero-play guides to build a 36x42 crosscut sled for my table saw. I also used the stops (with a shim) as a keeper to keep the sled from tipping off the table at the extremes. I build a lot of cabinets and used the sled to dado the shelf grooves. What a time saver! The zero-play guides were the key to a successful new shop tool.
June 6, 2010
Whip out the glue gun
For faster setup put a couple dots of hot glue on the bars and drop your sled into place. Then mark the holes, remove the bar, and then drill your screw holes..
November 27, 2017
Purchased
over 3 years ago
AeroPlay Guide Bar System
Guide bars are for future project (jig). ZeroPlay stops used to adapt Rockler hold down clamps for use on Shopsmith miter gauge tracks. Have used ZeroPlay stops similarly to adapt Woodpeckers and Incra clamps for Shopsmith. Works well.
October 14, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 9 questions Browse 9 questions and 40 answers
Why did you choose this?
Rockler Store
I'm making a large cross-cut sled.
Tim M on Oct 3, 2018
Very adjustable to fit various miter slots.
William S on May 8, 2018
I'm making a large cross-cut sled.
Tim M on Oct 3, 2018
Simplicity of Installation, Accuracy of Installation...
Morris S on Jul 1, 2018
Very adjustable to fit various miter slots.
William S on May 8, 2018
Have some jigs I want to make for my table saw, band saw, and router table. These worked very well the last time I used them.
Everette B on Oct 5, 2017
for a jig and it fits better and comes with stops
Robert C on Aug 29, 2017
I selected these in order to make jigs for my band saw table saw and router table.
Virgil V on Jun 28, 2017
Reviews and reputation of the company
Homer S on Feb 22, 2017
I will use to build a cross cut sled
GEORGE A on Jan 23, 2017
Great reviews
Laurie C. C on Jan 6, 2017
Great system. Very tight fit in miter slot.
Nick L on Nov 14, 2016
I'm building a crosscut sled, and the reviews and questions told me that others had used these for that purpose.
Rahn B on Oct 13, 2016
custom sled
Ronald T on Aug 14, 2016
I need an accurate bar that has no play at all
W O on Jul 1, 2016
Making a cross cut sled for my tablesaw and these would provide the most accurate system.
Scott S on Dec 31, 2015
Going to make my own sled, since I am limited on the amount of space in my shop.
Jim F on Nov 12, 2015
This seems to eliminate cutting wood to do this job, where moisture would affect performance!
Doug H on Aug 20, 2015
Really just wanted to try these out of curiosity--I've been very impressed. I can produce a miter bar using these that slides easily but has no discernible play at all. Great for making a table saw setup tool out of an inexpensive dial indicator.
GNWS on Aug 15, 2015
For accurate cross cut sled
Arnold A on Jun 16, 2015
for jigs
David B on May 27, 2015
Simplicity of Installation, Accuracy of Installation...
Morris S on Jul 1, 2018
Have some jigs I want to make for my table saw, band saw, and router table. These worked very well the last time I used them.
Everette B on Oct 5, 2017
order a zeroplay 3/4 but does not fit my roybi table saw the slot is 21/32 can you help?.
Francisco C on Apr 7, 2016
I have a Craftsman 10" table saw. The miter gauge is very loose in the miter slot. This jig is the fix I need to hold the gauge tight; however, the video doesn't show how to attach the jig (without the bar) to the micro jig.
How do I do that?
Denny on Oct 16, 2016
BEST ANSWER: If I understand your question. This bar is a system that mounts under a sled. This bar is not a replacement or add- on for your miter gauge. You might look at the Incra miter gauge as a replacement. It has adjustments for a loose saw slot and works with my Craftsman 10" saw.
What is the length of the bar?
Walter vS on Sep 22, 2015
BEST ANSWER: 9-1/4" long.
How do you attach the bars to the bottom of a sled? Can you get screws to thread into them from the top of the sled?
Patrick M on Jul 17, 2017
BEST ANSWER: You pretty much have to drill a hole (3 actually) and then counter bore the hole to a precise depth depending on the sled base material thickness so that the proper length of the provided machine screw extends through the bottom of the base. The instructions in the package explain the process well. Other the necessity to be fairly accurate the process is easy.
is one needed per sled or do I need to use both?
Zachary W on Jun 5, 2016
BEST ANSWER: For a full crosscut sled, I would use two guide bars. But for other jigs one might be enough. I used one guide bar on a dial indicator setup jig I built for my table saw.
I have a Bosch table saw with "T" Miter tracks. Will these guide bars fit?
Simon G on Jan 13, 2016
BEST ANSWER: Yes, I have a Bosch contractor saw that these work great with.
Does the zero play guide bars and the two zero stops work on table saws that do NOT have T slots?
Cleon L on Dec 27, 2015
BEST ANSWER: They work well with the standard slots
Can I install one guide bar and make it work with my cross cut sheld?
Charles C on Jan 24, 2018
BEST ANSWER: you can but I would add another regular guide to prevent any racking.