$14.99 Each
In stock

Mortise Chisel Handle

Item #
43610
Rating:
80% of 100
Mortise Chisel Handle
Mortise Chisel Handle
Frequently bought together
  1. 43610 - Mortise Chisel Handle
  2. +
  3. Rockler 3-Piece Mortise Chisel Sharpening Set
Total price: $0.00

Cut clean mortises by hand! This Mortise Chisel Handle makes it easy and accurate! Simply start your mortise by drilling holes with your Forstner bit. Then clean-up the mortise using this 6-1/2" solid Ash handle and any mortising chisel with a 5/8" shank. Cuts clean, precise mortises where mortising machines can't access or when you just have a few to do and don't want to set up your mortise machine. Note: Chisels shown not included.

Features:

  • Makes it possible to cut clean, accurate mortise joints by hand
  • 6-1/2" hardwood handle is made of solid Ash
  • Accepts any mortising chisel with a 5/8" shank
  • Steel locking ring makes installing or changing a mortise chisel easy
  • Sets up quickly and easily
(1) Mortise Chisel Handle
More Information
Brand Rockler
Weight 0.5000
Prop 65 WarningWARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

Prop 65 WarningWARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.0 / 5.0
11 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
1
2
2
0
Excellent quality.
Excellent quality. Bigger that I anticipated. Fits well very strong.
October 8, 2017
Purchased
1 year ago
Does the job it was intended to do.
Does the job it was intended to do.
August 9, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Everyone with a power morticer should have a handle
Alows you to square up round holes in several situations. For example, to square up a mortice made with a router. You could make this, but why bother. Spend the time making furniture.
June 6, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Bought with 1/2 inch mortising chisel- solid hold on tool good size
April 25, 2017
Purchased
1 year ago
Woodworking Experience:
Intermediate
A Clever Tool
The mortising attachment I have does not fit my Delta benchtop drill press, so I was forced to drill and chisel out the 16 mortises for my first mortise and tennon table project. This handle together with straight chisels and the square chisels from my mortise attachment made easy work of the marking and cleanout of the 16. A great innvation and a clever idea!
November 21, 2016
Purchased
over 2 years ago
Woodworking Experience:
Advanced
I purchased this about 2 months...
I purchased this about 2 months ago and put it in a drawer and promptly forgot about it. While cutting mortises on a wine rack this weekend I remembered this and broke it out for the first time. First off, the feel of this in the hand is very nice. It is hefty with a nice finish and just feels good. It did its job well. My drill press leaves a lot to be desired. The slop in the column makes for a rather crooked line. I was able to clean up the mess quickly. After all was said and done I had well-fitted mortise and tenon joints, probably the best I've ever done. I can't ask for better than that.
March 18, 2013
good handle
it is well made and easy to grasp
March 18, 2018
Purchased
9 months ago
Woodworking Experience:
Beginner
Nearly mortised my foot!
I inserted the proper sized mortise chisel into the handle and tighter up the grub screw. It seemed fine. Then I picked up the handle and the entire chisel and attacked mounting insert fell out of the handle. It appeared that there had been either no adhesive or too little adhesive used in constructing the unit. So, I pulled out my trusty epoxy adhesive and securely mounted the adaptor into the handle. Better check the rest of your handles.
December 1, 2017
Purchased
1 year ago
Mortise Chisel Handle
Handle came apart after first use. I used epoxy to repair it, it has been ok since then.
December 19, 2015
Purchased
over 4 years ago
Woodworking Experience:
Intermediate
Loose collet
Collet came loose from the handle after 2 minutes. Small single line of glue was used. Will probably be fine once I reglue it.
October 25, 2017
Purchased
1 year ago
Woodworking Experience:
Beginner
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 13 answers
Why did you choose this?
Rockler Store
Might never use, but good to have just in case.
David H on Nov 16, 2018
I needed the handle for the mortise chisel
Dale S on Sep 4, 2016
Might never use, but good to have just in case.
David H on Nov 16, 2018
wanted
CEA on Oct 4, 2016
I needed the handle for the mortise chisel
Dale S on Sep 4, 2016
to safely handle the mortise chisel
Irvin M on Aug 23, 2016
Use with my tools.
James Y on Jul 17, 2016
Have not had a chance to use it yet
Paul M on Jan 12, 2016
necessary to have
Edward E. M on Jan 3, 2016
Want to try it out.
Paul S on Jan 1, 2016
Needed for the mortise chisel
Mike H on Jul 4, 2015
I'm moving to hand tools woodworking and the morticing chisel works perfectly.
Michael C on May 9, 2015
In place square mortising for metal spindles to avoid boots.
John K S on May 8, 2015
Needed these mortise chisels and could not find any locally.
Paul M on Apr 16, 2015
wanted
CEA on Oct 4, 2016
to safely handle the mortise chisel
Irvin M on Aug 23, 2016
I need number 43499 which is the number that was on the box that the Rockler 1/2 inch chisel came in without the handle. On the Rockler Internet the chiselĂ´ needs the handle that is number 43610. So are they the same or different?
Crowing rooster on Mar 20, 2016
BEST ANSWER: The same, 43610 replaces the old number.
More Suggestions