Special Price $199.99 Each Regular Price $269.99 Each
In stock
The Portamate PM-P254 provides abundant power at an attractive price point—the perfect spare router motor for use in router tables and CNC machines.

Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor

Item #
53085
Rating:
94% of 100
Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor
Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor

If you're looking for a router motor to keep in a dedicated router table or CNC machine, look no further than the PM-P254. It features a soft-start motor that prevents sudden power surges and is easy on your nerves when you hit the on switch. Five speeds with a variable speed range from 10,000 to 22,000 RPM let you dial in the speed for a large variety of bit sizes, and the motor maintains constant speed under load. The variable speed dial is dust-sealed for reliability and premium NSK shaft bearings ensure maximum lifespan and minimal run out. The 15A motor is sized to fit most 4-1/4'' router lifts or CNC router mounts, and additional location pins make it compatible with many 3.25 HP router bases.

With the Rockler Protection Plan, you'll get accidental damage coverage immediately upon purchase of your tool. Plus, we will extend the manufacturer's warranty for your choice of an additional 1 or 2 years. We'll take care of all parts and labor for any repairs, with no deductibles and no hassles. If your tool can not be repaired, we'll gladly replace it. Available in the US only. Click here to learn more. Standard Manufacturer's Warranty: 12 months
(1) Portamate PM-P254 Variable Speed 3-1/4 HP Router Motor
(1) 1/4'' Collet
(1) 1/2'' Collet
(2) Collet Wrenches
More Information
Brand Portamate
Manufacturer Part Number PM-P254
Weight 10.2000
Tech Spec
  • Variable Speed Range: 10,000 - 22,000 RPM
  • Horsepower: 3.25
  • Amps: 15
  • Voltage: 120V
  • Housing Diameter: 4-1/4"
  • Collets Included: 1/4", 1/2"
  • Number of Speeds: 5
Technical Documents
Speed Range N/A
HP N/A
Prop 65 Warning WARNINGDrilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Excellent
Strong and solid.
January 1, 2018
Purchased
10 months ago
Good price point, good value
I had been wanting a dedicated motor for my router table for quite some time, but really didn't like the idea of spending a ton of money on a PC motor. Then I got a new lift and decided to pull the trigger on a dedicated motor. Since the lift is designed for a PC or equivalent, I felt like I didn't have much choice. Then I got an email from Rockler saying the P254 was on sale for $199... talk about timing! I know it's not a PC, but it's got all the bells and whistles, so I thought I'd give it a shot. It's a very nice piece and so far, has taken all I've thrown at it. If it stands up time-wise, I'm a happy camper
May 7, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Very good, but could be even better with a small change.
This is by far one of the best routers for a router table. The soft start is perfect, the motor is very quiet and has all the power one could ask for. There is, however, a serious problem with knowing the actual motor speed. The speed dial shows only two speeds, the highest and the lowest. And these are not in any way legible when mounted in the router table. I had to use a white ink marker to write numbers (1 to 8) on the side dial so I could better guess what the speed is set for. Even then, it is only a guess. Various diameter router bits need to be operated at different speeds for safety reasons. Portamate needs to find a fix for this problem.
September 6, 2017
Purchased
1 year ago
Woodworking Experience:
Advanced
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 9 answers
Why did you choose this?
Rockler Store
to have a dedicated router station motor
Dawn P on Sep 30, 2018
Excllent reviews and nice price.
Jim S on Apr 22, 2017
to have a dedicated router station motor
Dawn P on Sep 30, 2018
would like to try it
W C on Dec 16, 2017
Excllent reviews and nice price.
Jim S on Apr 22, 2017
orange is nice.
casey j on Apr 21, 2017
Building new router table.
MIKE F on Apr 16, 2017
Wanted a dedicated motor for my router table. On sale and correct size for my Incra lift.
Garey B on Apr 15, 2017
would like to try it
W C on Dec 16, 2017
orange is nice.
casey j on Apr 21, 2017
Which router table bases are compatible with this motor? Also, does it fit any other plunge bases for above-the-table work?
Tim S on Feb 24, 2017
BEST ANSWER: I went directly to the Portamate site and asked them, they said for certain that the PM-P254 will fit the Porter Cable 75361 base which is the fixed base for the Porter Cable 7518 and 7519. I'm not sure about any other bases that it fits.
Is Portamate PM-P254 Router Motor compatible with Porter Cable 690 routers ?
taylor b on Oct 6, 2018
BEST ANSWER: Mine is mounted in a router lift, so I can't take it out to try, but remember that the Portamate has about twice the HP of the Porta Cable 690, so it is probably larger. It is also good to know that the Portamate speed dial is numbered 1-8 (I think), so it doesn't show actual rpm, which you have to guess at. If you are going to be using larger bits, this is something to consider. Overall, it is a powerful machine with a soft start that doesn't ever shake the table and always runs smoothly throughout the cut. It was designed to be used in a router lift.
More Suggestions